Page 2
CoreView Videoscope System: Overview Video Controller CoreView 2.7 Videoscope: • 2.7 mm diameter / 800 mm shaft length • flexible scope sheath (multi-durometer Nylon w/ SS braid) • LED Light 2-way articulating scope tip (+/- 100B up - down) Source •...
Page 3
CoreView Videoscope System: Set-Up Step 2- Plug connector from #1 CoreView 2.7 Step 1- Unpack CoreView 2.7 videoscope and other videoscope into #2 Video Controller (align red index components marks on connectors) Lift from circled area to access lower storage...
Page 4
CoreView Videoscope System: Set-Up Step 4- Plug in connector from #2 Video Controller Step 3- Insert light guide from #1 CoreView 2.7 videoscope into ACMI port on front panel of LED power supply (align index marks on connectors)…leave light source Video Controller power switch in “OFF”...
Page 5
CoreView Videoscope System: Set-Up Step 6- Turn power on to #2 Video Controller, #3 LED Step 5- Plug in HDMI Cable to back of #2 Video Light Source and HDMI monitor. Controller… connect to HDMI monitor (19” or smaller monitor recommended) Your system is now ready to use.
Page 6
• Videoscope articulation controller will hold it’s position until re-adjusted • Please be aware that the CoreView 2.7 videoscope has a distal rigid tip length of 8 mm and a bending section length of 15 mm… do not force scope tip into inspection area •...
Page 7
CoreView Videoscope System: Usage & Cleaning Videoscope Usage Tips Videoscope Cleaning Tips • Do not attempt to force probes or • Fingerprints and debris on optical surfaces can seriously degrade borescope cables into sharp bends, even if it is a performance…Take care that distal tip flexible style scope.
Page 8
Service & Support Please contact Zibra Corp to obtain an RMA number prior to returning your equipment for evaluation… thank you! Zibra Corporation 640 American Legion Hwy Westport, MA 02790 Office: 1-800-758-8773 Email: sales@zibracorp.com Web: www.zibracorp.com www.zibracorp.com 1-800-758-8773 sales@zibracorp.com...