Advertisement
ONE TOUCH PERSONAL ALARM
7. ADD CONTACTS
To set up contact persons, click on
the first contact person icon on the
left hand side of the home screen.
(Repeat the process for the other contacts.)
Status can be set to active or not
active. This can be used to turn a
contact person off if they cannot be
contacted or respond, for example, if
they are on holiday.
Request location can be set on or
off. This allows contact persons to
search for the device and get an up
to date location using the request
location button on the home screen.
Enter the contact person's name,
email and phone number and then
add contact person to save.
Send welcome message if you
want to send the contact logon
credentials.
8. LOCATION
The request location button is used
to display the tracking information
generated by the pendant, known as
breadcrumbs..
ONE TOUCH PERSONAL ALARM
There are 4 functions that can be
performed.
Request device position
Jump to last known position
Scroll back through
positions
Scroll forward through
positions
The map will show the last known
location of the pendant along with
how long ago this location was
posted. If this was 15 minutes ago,
you could request device position
to get an up-to-date location for the
pendant.
9. SETTINGS
Within the settings tab are some
essential configuration points that
need to be set before the pendant
will function.
SOS Button can be configured on or
off by your provider.
Home Location shows the users
home address. This is then used as
the map guide for setting up Geo
zones when they are activated
Geo Zones can be turned on or off,
and be configured by the device
administrator.
To create zones, first activate them
and save the change.
Advertisement
