Advertisement
Quick Links
Advertisement
Summary of Contents for Vision Engineering CamZ
- Page 1 User Guide Handheld digital magnifier...
- Page 3 Health & Safety We, Vision Engineering Ltd., declare under our sole responsibility that the product CamZ of the brand Vision Engineering, to which this declaration relates, is in conformity with the following standards or other normative documents:...
- Page 5 Adjusting the Dimensioning Cursors: Illumination Mode: LED alternate flash: LED Brightness: Setting the Clock: Clearing All Saved Images: Battery level indicator Automatic power-off Connecting the CamZ to the PC Supported operating systems Factory default settings Care instructions and warnings WARRANTY...
- Page 7 Fit the cable to the charger and plug it into the end of the handle on the CamZ (A). The charging indicator around the power connector will illuminate in orange as the CamZ is charging and will extinguish when charging is complete.
- Page 8 OPERATION Stability Leg The CamZ is provided with a flip out leg located around the lens on the underside. Simply flip it out fully to help maintain the ideal distance from the item you are viewing. Click it back in place when not in use.
- Page 9 Battery level indicator When the unit is powered on, the remaining battery capacity is estimated and displayed briefly. A warning will be issued when the battery is almost depleted. www.visioneng.com/support CamZ handheld digital magnifier...
- Page 10 USB plug on the supplied cable into the micro USB socket on the CamZ. Connect the other end of the cable to a USB port on your PC. If this is the first time the CamZ is connected to the PC then wait until the PC automatically installs the correct drivers.
- Page 11 Engineering reserves the right to refund the purchase price if it is unable to provide replacement, and repair is not commercially practicable or cannot be timely made. Parts not of Vision Engineering manufacture carry only the warranty of their manufacturer. Expendable components such as fuses carry no warranty.
- Page 12 Visit our website: www.visioneng.com Disclaimer – Vision Engineering Ltd. has a policy of continuous development and reserves the right to change or update, without notice, the design, materials or specification of any products, the information contained within this brochure/datasheet and to discontinue production or distribution of any of the products described.
Need help?
Do you have a question about the CamZ and is the answer not in the manual?
Questions and answers