Setup - Blaupunkt BPDVD99 Instruction Manual

SETUP

LOADING A DVD OR CD
Loading a Disc
1. Press the Open button to open the Disc Door.
2. Load a disc into the DVD player, label side facing up.
3. Manually close the Disc Door.
After a disc is loaded, it will begin playing automatically.
Playing a Loaded Disc
1. Follow the instructions for Loading a Disc.
2. If the disc does not begin playing automatically, press the Play/Pause button.
Programming a Loaded Disc
1. Follow the instructions for Loading a Disc and Playing a Loaded Disc.
2. While the loaded disc is playing, press the Program button on the remote.
3. Use the Number Keypad to enter in the titles and chapters in the order you want to
view them.
DVD Titles and chapters or CD tracks will play in the order they are programmed.
4. Repeat step 3 until the desired DVD titles and chapters or CD trcks are programmed.
USB PORT
Connecting a USB Thumb Drive
Connect a USB Thumb Drive to the USB Port. Picture formats are supported (Jpeg).
Accessing the Content on a USB Drive
1. Follow the instructions for Connecting a USB thumb drive.
2. Press the DVD/SD/USB button to enter DVD/SD/USB mode.
SD CARD
Connecting a SD CARD
Note: Formats are not universally compatible. Playback may be dependent on
recording conditions.
1. Follow the instructions for Connecting a Memory Card.
2. Press and hold the DVD/SD/USB Button to enter DVD/SD/USB mode.
11