Toyota 2005 tacoma; toyota 2006 tacoma; 3” body lift (32 pages)
Summary of Contents for Performance MP-8
Page 1
2010+ Dodge 6.7L Installation Manual Thank you for buying the MP-8 for the 07.5 Dodge 6.7L. Here you will learn how to install this MP-8 into your truck, and we guarantee that you will be satisfied with our product. Before you get started check to make sure that you have everything below in the contents that came in the box.
Page 2
Installation of the TS Performance Power Play Mp-8 2011+ Dodge 6.7L Read all instructions and fully understand them before installing you TS Performance MP-8 module. Disconnect the battery terminals and remove keys from ignition before installation. Place Di-Electric Grease onto every electrical connection.
Page 3
Continued 7. Use a wrench to unscrew supplied nut in order to remove valve cap. Be careful to hold end of valve while doing this! It is spring loaded and you don’t want to lose parts! 8. Removing metal spring, then insert the 3 supplied metal shims into valve.
Page 4
15. Locate the fuel pressure sensor on the back of the fuel rail close to the fire wall. Plug the factory connector into our harness and our harness into the fuel pressure sensor. 16. Connect our harness to the MP-8 module and mount the MP-8 in a location of your choice.
Page 5
Do not use this product until you have carefully read the following agreement. This agreement sets forth the terms and conditions for the use of the TS Performance product. The installation of this product indicates that the buyer has read and fully understands this agreement and accepts its terms and conditions.
Page 6
Continued WWW.TSPERFORMANCE.COM FOR TECHNICAL SUPPORT (270) 746-9999...
Need help?
Do you have a question about the MP-8 and is the answer not in the manual?
Questions and answers