Advertisement
Section 3. Creating a Log
MaptunerX log files are called "plots." These plot files store all data reported to the MaptunerX as well
as internal data sensed by the MaptunerX itself from the time the plot is started until it is stopped.
The plots are stored as a .csv file with the default name of "plot(n).csv" where (n) is the number of the
previous plot file +1.
Step 1
Press
Add Vehicle button.
Step 2
Press
START to begin recording a Plot File.
The
recording symbol will animate while the Plot is being recorded.
Press
STOP to end the recording.
Press
CLEAR to erase the current recorded Plot.
Rename to give the current Plot a new name.
Press
After you have finished recording your files they can be viewed on your PC.
7
Advertisement
