Advertisement
Quick Links
Advertisement
Related Manuals for Flykly Smart Bike
Summary of Contents for Flykly Smart Bike
- Page 1 SMART BIKE...
- Page 2 YOUR INFORMATION. YOUR RESPONSABILITY. Thank you for your support, trust and for believing in the Flykly Project. To reduce the risk of serious personal injury, you read carefully the instructions We could not have done it without you and we are honored you are now a part of this manual.
- Page 3 IN THE BOX. YOUR SMART BIKE. Smart Bike 1. Frame 6. Kickstand 11. Front brake caliper 2. Saddle 7. Chainwheel 12. Fork Charger 3. Seat post clamp 8. Pedals 13. Front wheel 4. Rear brake caliper 9. Handlebar 14. Smart Wheel Multilingual Getting Started 5.
- Page 4 Damage can occur while using non original charging devices. Save all safety warnings and instructions for future reference. IF your Smart Bike has a 6 pin connector (see Figure 1), please be DO NOT open the Smart Wheel yourself. The Smart Wheel is...
- Page 5 1.2 Saddle height charger is not inserted correctly. Do not short circuit the pinout of the charging connector. To ride comfortably and pedal efficiently, it’s very important to have the Keep the battery charger away from rain or moisture. Keep the saddle at the correct height.
- Page 6 1.4 Position adjustment 2.3 Handlebar and saddle Are handlebar and saddle fixed correctly, tight bolts and clamp The brake and shifting levers (if existing) are positioned on your bicycle enough so they can’t twist? Handlebar is in good condition with grips by the supplier in order to fit most rider’s requirements.
- Page 7 CAUTION: Be sure that cable stopper and cable guide are correctly 4. SOMETHING IMPORTANT ABOUT YOUR SMART BIKE positioned when you repair of fit your brake system. 4.1 Assembling CAUTION: contact your dealer to fit your brakes in case of any doubt.
- Page 8 Your Smart Bike features the Smart Wheel, an advanced powertrain for e-bikes higher than 5 km/h. To turn on your Smart Bike just start pedaling as usual that helps you in reducing your pedaling effort. The system is compliant to the or spin the wheel while you lift the bike, as explained in Figure 2 .
- Page 9 System (KERS). In order to activate the regenerative braking you need NOTE: to pedal backwards. As soon as you stop pedalling, the motor will stop when the charger get disconnected from the bike, the Smart Bike will turn off. braking.
- Page 10 3. APP. APP AND AWAY In order to access all the function of your Smart Bike, you would have to connect a smartphone through the bitride app. 3.1 What is the bitride app? The bitride app helps you to act smarter during the everyday mobility;...
- Page 11 3.3 Which devices does the bitride app support? On Android: Open Google Play Devices with Android 4.2.3 or newer are supported; iPhone 4s, iPhone 5, Tap the search icon iPhone 5s, iPhone 5c, iPhone 6, iPhone 6+ are also supported. Enter “bitride”...
- Page 12 Smart Bike, you will need to give a name to it! On Android: Once your Smart Bike is turned on (see 1.1), you can connect bitride to the bike. Depending on your mobile device the procedure may change.
- Page 13 To unlock the bike, just connect your smartphone, press and hold the lock icon. Even if it is possible to use the Smart Bike with out the bitride app, you can NOTE: the embedded electronic lock will not prevent thieves from stealing your bike. Please access more features if you connect it to a smartphone.
- Page 14 Safari 8:08 AM 100% Safari 8:08 AM 100% Safari 8:08 AM 100% Time remaning: 40h 0 m Safari 8:08 AM 100% App menu Access the dashboard menu Motor Power info Bike speed Hold to unlock Lock icon Figure7: locking / unlocking Smart Wheel Disconnected from device Safari...
- Page 15 By changing the TOP BOOST SPEED parameter (0 to 25 km/h), you set the reset of your Smart Bike by sliding the factory reset icon on the right side speed the motor assists you at the maximum level. For higher speed than of your screen.
- Page 16 22 km/h Assist Level Warning icons let you understand when there is something wrong with your Smart Bike functioning (see 4.1). If you experience a problem that prevent you from using your Smart Bike correctly, please contact our Speed [km/h] customer care on our website or at hello@flykly.com! Icons can appear...
- Page 17 SPECS. TECH SPECS Temperature WARNING This icon appears when the temperature inside the hub reaches a BIKE critical level. The system will automatically set the amount of power Wheel size inches not to be damaged. Weight Connectivity WARNING Allowed total weight This icon appears when there is a connectivity problem with the wheel.
- Page 18 TAKING CARE OF YOUR SMART BIKE CHAIN Check the chain for excessive tight or stretching. Check for any stiff links In case of chain drive system. 1. Mechanical parts HUBS 1.1 Cleaning Check front and rear hub bearings to prevent excess play or binding.
- Page 19 In case of questions concerning transport of the Smart Bike, please refer to When contacting Flykly for an issue related to your Smart Wheel please an authorized Flykly dealer.
- Page 20 The charging procedure will start as soon as the charger is connected both Protect the hub from moisture and water. The optimal storage temperature to your Smart Bike and to the mains. While charging, the LED located on is +20°C and the bike must be stored between -40°C and +60°C.
- Page 21 © 2015-18 FlyKly, s.r.l.