Advertisement
ALL PURPOSE CANOPY
TM
20' x 20' x 9'6" (6.1 x 6.1 x 2.9 m)
Assembly MANUAL
Model NO.: 1934796
Tools required for assembly (not included)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for WeatherFast 1934796
- Page 1 ALL PURPOSE CANOPY 20' x 20' x 9'6" (6.1 x 6.1 x 2.9 m) ASSEMBLY MANUAL Model NO.: 1934796 Tools required for assembly (not included)
- Page 2 TABLE OF CONTENTS Important safety instructions ...................................... 2 Intended use ..........................................2 Parts list ........................................... 3 Assembly preparation ........................................ 3 Assembly ..........................................4 - 7 Important notice ......................................... 8 IMPORTANT SAFETY INSTRUCTIONS WARNING! To reduce the risk of serious injury, read the following safety instructions before assembling and using the product. No responsibility is accepted for damages or injuries resulting from improper installation or noncompliance with these instructions.
- Page 3 PARTS LIST Drawing Qty. Description Part# 77.5” x 2” Pipe 77.5” x 1 1/2” Pipe 50” Swedge pipe 3-way connectors 4-way connectors Ball tie downs Foot pads Green/White PE Cover with Leg Skirts ASSEMBLY PREPARATION ● Place all parts from the packaging box in a cleared area and arrange them on the ground in front of you. ●...
- Page 4 ASSEMBLY Step 1 Lay out the roof frame parts as shown below. ● ● Please note: The Parts #2 are used to form the side and peak. The parts #1&3 are used to form the roof rafter. Start with the center and complete the center frame first,. Then assemble each side. ●...
- Page 5 ASSEMBLY Step 2 Connect 4 legs of one side to the 4-way and 3-way connectors. ● Step 3 Unfold the cover with the grommets toward the cover's bottom and place the cover over the frame. ● The flared edges should be located at each of the 4 corners of the frame.
- Page 6 ASSEMBLY Step 4 ● Connect the 4 legs for the other side the same way. And then attach the cover to the frame with ball tie downs. ● To properly install a bungee and starting at the four corners of the cover: Insert the ball tie down into the eyelets and wrap the cord around the tube and hook it over the ball.
- Page 7 ASSEMBLY Step 5 This canopy is designed for use as a temporary structure. After assembly, the canopy MUST BE securely an chored to the ground to prevent damage from winds. Screw each anchor into the ground leaving 2in between the ground and the eye of each anchor. ●...
- Page 8 Warranty: This shelter has a 12-month limited warranty against defects or damage that may have been caused in shipment. Weatherfast grants the original purchaser who has properly used, installed, and maintained their shelter free replacements parts, including cover, end panels, or framework pieces, for a period of 12 months after the original purchase date.
Need help?
Do you have a question about the 1934796 and is the answer not in the manual?
Questions and answers
Were can i order parts for this tent