Summary of Contents for Topsystem VOXter WL-BT 1006
- Page 1 ® topSPEECH-Lydia -PDA User manual ® VOXter WL-BT 1006 topSPEECH-Release 5.x or higher Version: 1.5 Date: February 2009...
- Page 2 © Copyright 2009 topsystem Systemhaus GmbH This manual is protected by international copyright laws. Unless explicitly permitted by topsystem Systemhaus GmbH in written form, any use, propagation, duplication or reprint - even in extracts – of these documents or their contents will lead to claims of compensation.
- Page 3 Allowing connection to CoPilot................15 Care instructions ...................... 15 Avoid extreme environmental exposure ............... 15 Avoid shocks or impacts ..................16 ® Technical information about VOXter ..............16 Appendix I - Overview of selection menus ............17 topsystem Systemhaus GmbH Page 3...
-
Page 4: Operating The Voxter
In addition to these buttons, a status display is also available here. ® The following figure shows the basic operating elements of the VOXter Up-/down-buttons Rechargeable battery Headset jack Status display topsystem Systemhaus GmbH Page 4... -
Page 5: Connecting The Headset
2.1 Switching the device on ® The VOXter is switched on by pressing the On/Off switch on the front of the device. The device is booting when the middle light (of the three status lights) starts flashing green. topsystem Systemhaus GmbH Page 5... -
Page 6: Switching The Device Off
The middle lamp of the status display will now show a continuous red light. ♦ To re-activate the microphone, briefly press the Select button . The status light will be switched off. topsystem Systemhaus GmbH Page 6... - Page 7 ® User Manual VOXter WL-BT 1006 February 2009 Select button Status display Figure 4: Activating the Mute function Please note that the mute function can only be activated while running the picking application. topsystem Systemhaus GmbH Page 7...
-
Page 8: Power Supply Of The Voxter
At the end of each shift, always connect the device to the charging station in order to recharge the battery to its full capacity! Make sure you only use fully charged devices at the beginning of a shift. topsystem Systemhaus GmbH Page 8... -
Page 9: Replacing The Battery
♦ Unlock the battery that you want to change. Resolve the adjustment of the battery by pressing the release latch on the top (Figure 5). Keep the latch pressed down and remove the battery carefully (Figure 6). topsystem Systemhaus GmbH Page 9... - Page 10 Make sure the electric contacts of battery and charging station are properly connected (Figure 7)! Figure 7: Charging station Figure 8: Charging station with battery Once the battery is properly connected to the charging station, the charging status is checked automatically. topsystem Systemhaus GmbH Page 10...
-
Page 11: Charging The Battery With The Voxter
® recharged too. Therefore it is necessary to place the VOXter in the charging station regularly e.g. at the end of each shift. ® Figure 9: Charging station Figure 10: VOXter connected to charging station topsystem Systemhaus GmbH Page 11... - Page 12 Table 1. ® At the end of shift the VOXter should be placed in the charging station, to make sure that ® the battery of the VOXter is being charged during the rest period. topsystem Systemhaus GmbH Page 12...
-
Page 13: General Operations With The Voxter
♦ Now you hear a speech information via headset stating which feature of the start menu is currently selected. Depending on the settings, multiple applications might be available to choose from. topsystem Systemhaus GmbH Page 13... -
Page 14: Logging-Off After Work
PDA to run the topSPEECH-Lydia speech trainer. The training is performed as described below: ® ♦ First, the user has to start the training on the VOXter by selecting the item "speech training" in the main menu. topsystem Systemhaus GmbH Page 14... -
Page 15: Allowing Connection To Copilot
To a certain degree, the VOXter is protected against water, dirt and dust. Nevertheless, the device should be protected against any pollution as good as possible. This is especially to be regarded when storing or recharging the device. topsystem Systemhaus GmbH Page 15... -
Page 16: Avoid Shocks Or Impacts
Operating temperature - 20 ° C to 40 ° C / -4 ° F to 104 ° F Storage temperature - 20 ° C to 40 ° C / -4 ° F to 104 ° F topsystem Systemhaus GmbH Page 16... -
Page 17: Appendix I - Overview Of Selection Menus
Press briefly: Select the digit currently announced Press briefly: Browse to the next or the previous entry to select the next digit. Press long time to log-in. Press long time: to delete the last digit that was selected. topsystem Systemhaus GmbH Page 17... - Page 18 ® User Manual VOXter WL-BT 1006 February 2009 topsystem Systemhaus GmbH Page 18...
Need help?
Do you have a question about the VOXter WL-BT 1006 and is the answer not in the manual?
Questions and answers