1. Manuals
  2. Brands
  3. Idview Digital Manuals
  4. DVR
  5. i Alarm DVR
  6. User instruction manual

Idview Digital i Alarm DVR User Instruction Manual

H.264 real time network digital video recorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Idview Digital i Alarm DVR

Summary of Contents for Idview Digital i Alarm DVR

  • Page 3 User Instruction Manual Introduction Welcome to use the upgrade EAVS based on the "triple play" of DVR. EAVS’s full name is Enternet -Alarm Video Server, ie, digital network alarm video server, which is based on the embedded hardware and software-based application technology, combined with advanced alarm technology and H.264 video compression technology, all-digital, networked, intelligent video surveillance alarm system.
  • Page 4 User Instruction Manual High level of integration reduces the maximum extent of a single modular variety of devices, which reduces the linkage module and other external devices, and greatly reduces the cost of system integration.In the process of the formation of the system, due to relatively high integration, labor costs, supplies, cost of intermediate devices are greatly reduced , making the EAVS system more economical.
  • Page 5 User Instruction Manual Contents Chapter 1 Function and Features....................1 Chapter 2 Specifications and interface definitions..............5 2.1 Attentions..........................5 2.2 Open Package and Accessories Inspection.................6 2.3 Pre Installation Instructions....................7 2.4 Performance Parameters....................13 2.5 Connection Diagram......................14 2.6 System Connection Diagram.....................15 2.7 Remote Controller Description...................17 2.8 Mouse Operation........................20 Chapter 3 Host Operation......................22 3.1 Menu of Host System......................22...
  • Page 6 User Instruction Manual 3.3.2.1.4 Setup CMS........................34 3.3.2.1.5 Setup User( Voice) Phone No...................34 3.3.2.1.6 Password Setup......................36 3.3.2.1.7 GPRS Setup......................37 3.3.2.2 Alarm Link Setup......................38 3.3.2.3 Timing Arm/Disarm.......................40 3.3.2.4 Alarm(Remote / Zone) Query..................41 3.3.3 Alarm Configuration......................42 3.3.3.1 Motion Detection......................42 3.3.3.2 Video Loss........................45 3.3.3.3 HDD Loss........................45 3.3.3.4 Video Blind ........................45 3.3.4 Electric Switch.........................46 3.3.5 Simulation........................48...

  • Page 7: Chapter 1 Function And Features

    User Instruction Manual Chapter 1 Functions and Features 1.Basic Functions ▲It is based on an Embedded Linux operation system, which supports browsing by the windows IE explorer and mobile phone. ▲It uses H.264 hardware compression technology with high compression ratio and flexible handling. ▲It supports at most 16 channels video input,1 channel BNC video output ,1 channel VGA video output and 1 channel HDMI output.
  • Page 8 User Instruction Manual ▲It adopts the hibernation treatment for the non-working hard disk, which favors heat dissipation power consumption reduction,and consequently prolong the HDD service life. ▲Files on the hard disk include overlaid loop records and non-loop records. ▲The stored data adopt special format to avoid the data tampering and ensure the data security.
  • Page 9 User Instruction Manual ▲System screen has high definition and exquisite images. ▲The channel screen displays the status of channels , such as video , dynamic detection,video loss,video mask,etc. ▲Display modes include signal screen display,multi-screen display,and multi-channel cycle display. ▲The brightness, contracts, saturation,and color of the preview images are adjustable.
  • Page 10 User Instruction Manual kinked with one or more video camera; while a video camera can be linked with one or more detectors. As soon as the detectors are triggered,the associated video camera will start recording, and the siren and flashing light will also be started at the same time.

  • Page 11: Chapter 2 Specifications And Interface Definitions

    User Instruction Manual Chapter 2 Specification And Interface Definition 2.1 Attentions ▲Power supply The power supply of this device is DC 15V/3A or 12V/3A according to the model of the product. Please use the power provided by our company. If you do not use this device for a long time, please unplug the power cord from the socket.

  • Page 12: Open Package And Accessories Inspection

    User Instruction Manual ▲Copyright protection: During video recording or monitoring, please do not infringe the related rights of the third parties.Otherwise, you have to be at your own risk. Without the explicit approvals of our company or authorized units,any changes or modifications on the devices are not allowed as it may damage the device and bring inconvenience to the users.Otherwise, you will lose the right of after-sale service.

  • Page 13: Pre Installation Instructions

    User Instruction Manual 2.3 Pre-installation Instruction ▲. Alarm Types 1)Zone: A host device contains a number of different zones, which indicates that the system can be connected with many independent detectors. Each zone can be connected with different types of sensors and set as a certain zone through programming, so as to make operation more convenient and alarms more reliable.
  • Page 14 User Instruction Manual device will buzz as soon as the time delay starts(as a cue signal of disarming the system). It is effective in away arming conditions. 6)Perimeter zone: It is used for external door, windows and guardrails. If they are damaged,the alarms will occur.The zone has no time delay function.It is effective in away arming conditions.
  • Page 15 User Instruction Manual the local alarm. Note: the output current should not be exceeded 500mA, otherwise, the host device may not work properly. 14)Alarm communication: The device has built-in alarm communicator which can output the situation to the alarm center through telephone line dial-up.There are totally 2 groups of terminals for connection,i.e.
  • Page 16 User Instruction Manual code has been preset before the detectors or monitoring host leave the factory. 21)Admin password/User password: The Admin password refers to the password set by system administrator for host system; while the user password refers to the password set by users in daily using process to perform arming,disarming,remote control, and other operations.The main purpose of setting password is to ensure the safety of the system.
  • Page 17 User Instruction Manual devices with all the server using FTP protocols in the world and access the servers to obtain large amount of programs and information. The main function of FTP is to enable users to connect a remote computer, on which FTP server program is running, to check what kind of files there are on the remote computer.And then copy those files from the remote servers to the local computer, or send the files on the local computer to the remote servers.
  • Page 18 User Instruction Manual 9)video display screen, 1 channel, 4 channel, 9 channel. 10)home alarm( in home alarm status, light on) 11)away alarm(in away alarm status, light on) 12)disarm (in disarm status, light on) 13)telephone line faulty(in telephone line faulty, light on) 14)alarm indication ( when alarms, the light flashes) 15)back up batteries voltage( on in batteries voltage.

  • Page 19: Performance Parameters

    User Instruction Manual 2.4Performance parameters Product Name EAVS Operating Embedded Linux system User Interface 16 bit true color graphical menu operation interface support USB mouse operation with menu notes Peripheral Video input 4/8/16 channel BNC video input interface Audio input 4/8/16 channel RCA audio input Audio output 1 channel RCA audio output...

  • Page 20: Connection Diagram

    User Instruction Manual Audio output rate 24Kbps Others Power input AC 110-24V/DC 15V Working -10-60℃/10%-90% temperature/humidity 2.5 Connection Diagram...

  • Page 21: System Connection Diagram

    User Instruction Manual Power Supply * Please connect all the wired cable before power on. Please do not connect the wired cable on the status of power on. * Used 12V DC sealed lead acid battery, and exchange the battery per 3 to 5 years. * Keyboard, auxiliary power, siren ect total power supply demand can not exceed to the maximum power of the host.
  • Page 22 User Instruction Manual EAVS Series digital video network alarm server ·You can connect 8 wired zones, maximum support 8 remote control, 32 wireless zones ·It supports contact ID protocol, alarm information can be uploaded to the CMS , telephone line can also be used to remotely arm and disarm ·A four-dimensional joystick keyboard can control 8 digital network alarm server at the same time...

  • Page 23: Remote Controller Description

    User Instruction Manual ·It can connect 4 video signals, 4 audio signals.Video can be output with a standard 15-pin VGA port, BNC interface output can also be used. ·It supports TCP / IP protocol, can be remotely controlled by the client CMS, alarm video can also be uploaded to the client CMS platform EAVS series product is simple to operate, easy to use and fully compatible with alarm,...
  • Page 24 User Instruction Manual...
  • Page 25 User Instruction Manual Switch the monitor to PC or DVR 【PC/DVR】 Shutdown Button 【 】 【LOG/LOCK】 Get operated authorization in the entry of system/Lock screen 【+ ZOOM - 】 Zoom 【+ FOCUS - 】 Focus Away arm 【ARM】 Disarm 【DISARM】 Set and call out pattern scanning lines 【PATT】...

  • Page 26: Mouse Operation

    User Instruction Manual Previous file 【 】 Next file 【 】 Clear key 【*】 Confirmation key 【#】 【0…9】 Numeric keyboard Reservation function key 2.8 Mouse Operation In addition to remote control operation, the user can operate menu functions with the mouse.Insert the mouse with USB interface into the mouse interface of the machine panel Click the right 1.enter system main menu:click the right mouse on the real-time...
  • Page 27 User Instruction Manual click the left mouse button to zoom in the screen of a certain channel. Double click the left mouse button again to return to the monitor and playback screen. 3.Color adjustment and the PTZ settings: the PTZ control and the color adjustment are set for a single channel.if it is a multi-screen mode, please left click the screen of relevant channel.
  • Page 28 User Instruction Manual...

  • Page 29: User Log In

    User Instruction Manual 3.2.System Setting and operation 3.2.1 user log in 3.2.1.1 start up Connect the DC15V power adapter to the socket on the rear panel of the device. After start up, the power light [ pow ] will be illuminated. It will display 4/9/16 channels monitoring video on the monitor screen.

  • Page 30: Menu Operations

    User Instruction Manual Note: the following is to use the remote controller or mouse to operate, when you use the mouse, please scroll up mouse wheel up and down in no mouse cursor conditions. 3.3 Menu operations. The main menu includes [system] [zone] [alarm] [electric] [simulation] [digital] [network] [information].

  • Page 31: Basic Setting

    User Instruction Manual 3.3.1.1 Basic Setting Move the cursor to the [basic setting], use [ enter] button on the remote controller or click the left mouse button to enter the video configuration interface. Language: Chinese And English for options Video Format: Including PAL,NTSC, default setting is PAL, used in video signal standard.

  • Page 32: User Setting

    User Instruction Manual Time Format: Choose desired time format, including ‘24 hours format and 12 hours format Video Size: define the video length time as one package, divided into 15 minutes, 30 minutes,45 minutes, 60 minutes. Video Type: overwrite or no overwrite for options No overwrite conditions: the current working HDD is overwriting, or current working HDD just overwrote.

  • Page 33: Hdd Setting

    User Instruction Manual 3.3.1.3 HDD setting Move the cursor to the HDD setting.press the [enter] button from remoter or click up the left button from the mouse to get the following interface. ID: maximum support HDD qty Status: HDD status(connected or disconnected) Total: HDD maximum capacity, free means surplus capacity.

  • Page 34: Default Setting

    User Instruction Manual 3.3.1.4 Default Setting Restore to the factory default according to the demand, if activate this function, the related setting will restore to the default factory. Please be careful. 3.3.1.5 System operation System upgrade: please store the upgrade file save to the root of the U disk. Insert the U disk into the USB 2.0 slot.

  • Page 35: System Maintenance

    User Instruction Manual Note:In the process of the upgrading, please do not disconnect the power, the system will reboot after finishing the upgrade.(normally need 2-3 minutes to complete). 3.3.1.6 system maintenance Setup the system of automatic restart time and date, can multi-select. If setup, system will restart every week as your demand.

  • Page 36: Zone Setting

    User Instruction Manual User Name:the user of the remote controller. It can be empty. Wireless siren coding: when the built in siren of the host can not satisfied to your demand, need external wireless siren.please press the wireless siren coding button. Wireless siren coding method: enable the wireless siren receiver,press [save] key of the siren, left click wireless siren coding from the VGA, when you hear the voice prompt, means coding success, If delete the wireless siren, press...
  • Page 37 User Instruction Manual host device and CMS in case of emergency. Once the alarm of the zone is triggered, it will report the alarm messages to CMS in accordance with the preset alarm type. Besides, once the alarm type of a certain zone is set, it will give alarms in accordance with the preset alarm type no matter what kinds of alarms are triggered.

  • Page 38: System Setting

    User Instruction Manual Related Zone No.: it is required to associated with 2 neighboring wireless devices in case of preventing from false alarm. Within user set time, trigger two devices, the host will alarm, only trigger one of them, the host device will warn you:[You have entered private place,please exit quickly].
  • Page 39 User Instruction Manual Phone line test:it refers to the time interval of checking telephone line lost, the default setting is 0(disable) Arm/disarm report:enable or disable report arm/disarm report to CMS, default setting is disable. Force Arming: when zone occurs error,enforce the alarm accessories to be arm status.

  • Page 40: Setup Cms

    User Instruction Manual 3.3.2.1.4 Setup CMS It can set 2 CMS No. When you set the CMS, need corresponding user ID at the same time. Please do not set the user voice telephone No as the CMS No. Dial to CMS times: When dialed to the CMS No. failed, The host device can dial to the CMS No again and again.
  • Page 41 User Instruction Manual Activate Alarm And Receiving Alarm ①Effectiveness of alarm trigger The burglar zones, perimeter zones, delay zones are controlled by the situation of away arm, stay arm, and disarm. All of the other zones are in 24 hours effectiveness of alarm status. As for burglar zones, perimeter zones, and delay zones, the alarm will be given after the set delay time finishes;...

  • Page 42: Password Setup

    User Instruction Manual and alarm situations of triggered zone and the host device will automatically dial the preset alarm phone. There will be voice prompt in receiving the call. The following actions can be taken on the alarm phone by following the corresponding voice prompt.

  • Page 43: Gprs Setup

    User Instruction Manual Password mainly set the admin user password and main user password. Admin user password: default is 012345. Main User Password: The user’s password, default is 1234. It can make arm/disarm and voice phone control ect. 3.3.2.1.7 GPRS setup Please check and confirm the SIM card comply with GSM module requirement before activating the GPRS function.

  • Page 44: Alarm Link Setup

    User Instruction Manual 3.3.2.2 Alarm Link Setup Example: Link the zone 03 to the channel 3 After activating alarm, the host device will send alarm photoes related in CH3 to the specified email address and report the alarm information, video, photo to CMS.
  • Page 45 User Instruction Manual User can set each channels according to their needs. Only activate each function, all the needs can come into play when alarms. One zone can link to multiple channels. To activate the PTZ link function, press enter button on the remote controller or click up the left key by mouse to enter into below setting.

  • Page 46: Timing Arm/Disarm

    User Instruction Manual 3.3.2.3 Timing Arm/Disarm User define the time according to requirements. It can set 4 group of timing arm/disarm period per day. Each period consist of one timing arm and one timing disarm time. Note: 1. When timing arm/disarm [hour][minutes] set as 0, refer to disable the function 2.

  • Page 47: Alarm(Remote / Zone) Query

    User Instruction Manual 3.3.2.4 Alarm(remote/zone)query Includes wireless remote controller and zone ‘s information. ID: refer to unique ID code for the wireless accessories. Zone Type: includes burglary, delay, perimeter, 24 Hour, Emergency, Fire, Disable. Zone Name:refer to wireless accessories installation location.

  • Page 48: Alarm Configuration

    User Instruction Manual Alarm Configuration 3.3.3 Includes [motion detection][video loss][HDD loss][Video Blind]. 3.1 Motion Detection 3.3. The system will automatically take proper actions in respond to the changes of the screen status, someone is passing or the lenses are moved. It can set arm and disarm time, detection sensitivity, and detection areas.
  • Page 49 User Instruction Manual Channel: users may choose their desired channel for motion detection Enable: enable the function of the motion detection. Arm/Disarm Linkage:choose this option to activate the motion detection. Sensitivity: to define the sensibility of the motion detection. there are 7 kinds according to the users’...

  • Page 50: Video Loss

    User Instruction Manual function, please make sure to choose the option box. Everyday, you can set two group of regular time, it is in valid within this regular period. Beyond of this regular period is invalid. Note: Each channel can be set 4 different areas, move and click up the button of four different areas, it can be set each areas separately.

  • Page 51: Hdd Loss

    User Instruction Manual 3.3.3.3 HDD Loss When the HDD occurs abnormalities, the host will alarm according to below setting. Event type: define the HDD abnormal types, includes loss, error, full. Enable: enable or disable the HDD abnormalities. Siren Tone: enable the siren to alarm or not. Send Email: take photo and send to the user mailbox as soon as objects enter into the defined areas.

  • Page 52: Electric Switch

    User Instruction Manual Send to Email: take photo and send to the user mailbox as soon as objects enter into the defined areas. Time Linkage:user set the regular time according to the needs, if activate this function, please make sure to choose the option box. Everyday, you can set two group of regular time, it is in valid for the video blind within this regular period.
  • Page 53 User Instruction Manual switches into one scenario. Make a example Set switch No. 1/3/5/6 into the scenario 1, switch command is ON. Set switch No. 2/3/9/14 into the scenario 3, switch command is OFF. Keep saved above settings. When you choose the scenario 3, switch 2/3/9/14 will off at the same time. When you choose the scenario 1, switch 1/3/5/6 will on at the same time.

  • Page 54: Simulation

    User Instruction Manual Simulation 3.3.5 Simulation involved [Encode][Record][PTZ][Video Blind][Timing Color][Polling]. 3.3.5.1 Encoding Setting It can set each channel name, audio, time title, main stream, sub-stream, pre-record setting and so on. If need monitor the scene of sound. Need passive MIC and audio output device. Main Steam Setting: 960H is the best, video, photo upload may have heavy traffic in alarm status.

  • Page 55: Recording

    User Instruction Manual 3.3.5.2 Recording Video Type:Includes the timing recording and external alarm recording Regular Time: It can set 4 group of timing recording per day. The starting time of each period should be earlier than the finishing time. The start time of the second period should be later than the finishing time of the first period.
  • Page 56 User Instruction Manual In the process of setting time range, the video will only be effective for one type. If it has been set the timing video, alarm video, and motion detection video, then the manual video in this period will not be effective. The time period of timing video should not be the same as that of the alarm video and motion detection video.
  • Page 57 User Instruction Manual Save the settings, click right mouse button in the single-screen monitor to pop up the following auxiliary function menu. Choose PTZ Control to pop up the function menu which supports PTZ rotation and lens control. Directly click zoom, focus and aperture to adjust video size, definition, and brightness.
  • Page 58 User Instruction Manual Note: The setting of pattern scanning has to be done in PTZ setting. In this screen, it can only be called. Video Inquiry / Playback enter into the video inquiry and playback menu. Press the below icon Video Type: Includes All, Timing/Manual Video, Alarm Video, and ,Motion...

  • Page 59: Mosaic Setting

    User Instruction Manual detection. After searching all the video types. If it has video files, it will display all the channels in different type and color. Alarm video and Motion detection are red color, Timing video and Manual video are blue color. If without anything, it is gray color.

  • Page 60: Polling Setting

    User Instruction Manual sure enable channel’s timing color setting before operation. And do not overlap each period. 3.3.5.6 Polling Setting Screen interval(s): display the intervals of selected channel in turn(only if the channel is selected, the function can be effective)

  • Page 61: Digital Camera Setting

    User Instruction Manual Split 1: the host monitoring screen displays single channel in turn under the conditions of no operation or running, the channels can be multiply chosen. Split 4: the host monitoring screen displays 4 channels in turn under the conditions of no operation or running.

  • Page 62: Network

    User Instruction Manual Selected the corresponding channel, it will display the IP camera IP address, port No. User name, user password. It can make the IP camera synchronize with the host system. Also it can set the stream type(main stream or sub-stream).
  • Page 63 User Instruction Manual User can change the IP and MAC address UPNP(universal plug and play) it is a common name for a group of protocols, in simple words, UPNP is equal to automatic port mapping. If it needs to map the ports in the LAN,such as WEB map port, video map port, alarm map port, and phone map port, then default UPNP is activated.

  • Page 64: Pppoe Configuration

    User Instruction Manual the listen ports have to be used for browsing in the LAN. After setting the listen port, the equipment is required to reboot. Example: Intranet IP of the device:192.168.1.69, apply for a extranet IP: test.3322.org. Set WEB Map port as 2001, video map port 2002, phone map port 2003, web listen port 3000, video listen port 3001, phone listen port 3002, how to browse on the intranet and extranet?

  • Page 65: Ddns

    User Instruction Manual PPPoE(enable/disable): it is to enable or disable PPPoE function, the system default is disable. Account: user name provided by ISP Password: the corresponding password provided by ISP. Note: Enable PPPoE, input user name and password, save and exit, wait for 1 minute, enter the network setting interface, you will see the obtained IP.

  • Page 66: Ftp Configuration

    User Instruction Manual If it is to browse video on the WAN, firstly set transmission in the router settings. And then apply for a free domain name on 3322.org or DynDNS.org. Input the applied account and password in this setting box and save. Then you may browse on the WAN. 3.3.7.2.3 FTP Configuration FTP is used for the two-way transmission of the control files on the internet.

  • Page 67: Mail Configuration

    User Instruction Manual pictures in cooperation with CMS. Please remember to set the account and password before using CMS. 3.3.7.2.4 Mail Configuration Mail setting procedures 1/ search and input the SMTP Server domain name for sending mail 2/ input recipient address 3/ Input send address, which can be the same as the recipient address 4/ input the password of send mail 5/ click save button...

  • Page 68: Cms Configuration

    User Instruction Manual 3.3.7.3 CMS Configuration It can set alarm CMS IP, the alarm CMS IP of the company :113.105.146.146, if you want to upload the alarm information to the CMS, you have to apply and register and ID. If there are other CMS available for uploading , the CMS IP should be changed to the required IP.

  • Page 69: Time Syn

    User Instruction Manual reports. Sync GSM: it refers to the CMS information will synchronize with the GPRS. 3.3.7.4 Time Syn. It includes [time zone][server][port No.][time syn.interval]. 3.3.7.5 IP Filter Under below setting can permit to access to the host device’s IP or forbid to access to the host device’s IP.
  • Page 70 User Instruction Manual 3.3.8 Information Under below setting can browse the channels, alarm input/alarm output, hardware version, software version, release date, serial number, hardware type. Please learn of version info in advance when upgrade the system or consult customer service.

Table of Contents