Page 2
........................6 1.5 Battery Cover: Install and Uninstall ................ 6 1.6 T-Flash/SIM Card : Install and Uninstall ............... 7 2 Use SHM-200 ..........................7 2.1 Startup and Shutdown ....................7 2.1.1 Boot the Terminal and Access the Home Screen ..........7 2.1.2...
Page 3
3.7 Phone features ........................21 3.7.1 Calls ........................... 21 3.7.2 Contacts ........................... 22 3.7.3 SMS and MMS ......................22 3.7.4 Email ..........................22 3.8 Network connection synchronization ..............23 3.8.1 2G/3G data connection ..................... 23 3.8.2 Wi-Fi Internet connection ..................23 3.8.3 Bluetooth .........................
Page 4
POS terminal SHM-200 Thank you for purchasing POS terminal SHM-200. To ensure your safety and the proper use of this equipment, please read this guide carefully before using. About the configuration of this product, please refer to contracts related to the product, or consult the product vendors who sell you.
1. Before Using the device 1.1. Front Panel View Front Number Name Printer Locking(Up: Open /Down: Close) Receiver Display Menu Key Cancel Key Scan, Direction Key Back Key Enter Key Fn(Home) Key Key Pad 1.2. Back Panel View Back Number Name Scanner Fingerprint Area...
1.3. Left panel View Left Side Number Name Printer Cover Opener Scan Key Camera Key USB Connector / DC Charger Cover IC-Card Reader 1.4. Right panel View Right Side Number Name Printer Cover Opener MSR Card Reader Scan Key Power Key 1.5.
2. Use SHM-200 Startup and Shutdown 2.1.1 Boot the Terminal and Access the Home Screen The terminal begins the boot process as soon as power is applied. Do not press any buttons or attempt to remove the battery during the initial boot process.
2.1.3 Suspend Mode Suspend mode differs from Power off mode. Power off mode is the equivalent to having no battery or external power source connected to the device. The terminal does not receive incoming call when power is off since the device completely shuts down. In Suspend mode, the device enters a low power state to conserve battery power.
2.3 Home screen and main menu Notification/Status Bar Search Bar Clock Widget Home Screen Panel Swipe left or right with your finger to scroll between five Home Screen panels. Settings Personalize the panel with your Calendar choice of app shortcuts, folders, and widgets E-mail Favorites Tray...
3. Basic function MSR / IC CARD 3.1.1 MSR On the Home screen click => SHC Test click MSR => Swipe Card => Get Result 3.1.2 IC-CARD On the Home screen click => SHC Test click IC-CARD => Reset IC CARD => Insert CARD=> Get Result...
Note: Reset IC Card : Read IC-Card Data Eject IC Card : IC-Card is ejected Send : Transportation of APDU messages PICC On the Home screen click => SHC Test click PICC => Click Polling => Take Card at back Cover in Readable Area...
Scanner Scanner Currently, SHM-200 provides a one-dimensional bar code scanner to obtain and decode the information. On the Home screen click=> Scan Service Click Check the "Scan enabled" & “Scan Button enabled” & “Output foreground”. Enter an editing interface, such as text contents of the input interface, bar code scanning light trained on articles, press key bar code scanning, barcode information is displayed in the information bar at the scan is successful.
Page 14
Function Description Scan enabled Scanner Module On/Off Scanner Button Enabled/Disabled Scan Button enabled Output foreground Input scan data when focus editbox Decoding Illumination Scanner light on/off 十 Beam Flash on/off LCD mode Set Format Unicode/GBK Coding format End Character Set End Character Enter/Tab/Null Auto Sleep Need Insert Continuous Scanning...
Fingerprint scanning On the Home screen click => SHC Test click => Click Fingerprinter Place your finger on the back of the phone that belly fingerprint contact area, click the "Capture fingerprint" to get to the fingerprint blank squares at the figure below. Note: Capture Fingerprint : Just Capture Fingerprint Store : Store Fingerprint.
Page 16
2) Open Cover Open the printer pover in the direction of arrow. 3) Insert Paper Insert paper roll and insert paper in paper cutter. 4) Close Cover Close the printer cover and slide down printer cover locks.
3.5.2 Control Print Insert Number in the Editbox. And press the test button. Then, it will be printed number times. 3.6 Setup and installation 3.6.1 Date and time settings You may need to change the date and time in your device. 3.6.2 Language and Input Method In the "Settings"...
3.6.3 Display Settings Go to Settings => Display => You can set the brightness / wallpaper / Auto-rotate screen / sleep / font size / close sensor 3.6.4 Security Settings Go to Settings => Security Settings, you can set the screen lock / owner information / SIM card lock, etc.
3.6.5 Backup and reset - Go to Settings => Backup & reset => Restore factory settings - This action will erase the following data: System and application data and settings Download the app - It does not erase the following data: Current system software and bundled applications SD card files, such as music or photos 3.6.6 Ringtone...
3.6.7 Management Applications Go to Settings => Applications, enter the application management interface, you can view a downloaded program status SD card, running and other options, you can tap the program, open the application information interface, the program is forced to stop, unload, stop with other relevant operations.
Phone features 3.7.1 Call 1) Click the icon. 2) Input number and Click the icon 3) If you want to receive the call, drag circle to 4) If you don’t want to call anymore, click the Icon.
E-mail can send or receive e-mail messages. Description Created on SHM-200 equipment mailbox accounts, this account must first configure certain settings on your computer to QQ mailbox, for example, landing QQ mailbox, click the Settings mailbox upper right corner of the interface, enter account options, locate the server options and...
=> Create email account Click this icon:: => E-mail Enter e-mail address and password, click Next to begin connecting e-mail account Email check frequency to set, set to enter the next step Create a name for the account settings, click Next, go check the mail reading interface. 3.8 Network and connection synchronization 3.8.1 3G data connection =>...
=> Select Bluetooth => Find a suitable Bluetooth device => Bluetooth pairing Note: Sure to connect the device with the SHM-200 activated Bluetooth function and Bluetooth visibility turned on. During the connection, set up the pairing PIN code, the machine does not support a...
3.7.4 GPS SHM-200 is equipped with a high-performance navigation chip, can quickly and accurately obtain location information. You can download the navigation software and view the location information. When the phone battery is low, in order to protect the phone will not power down the system data and damage that would ban open the GPS positioning function.
Note: USB Connection modes Explaining Mode Description Connect to PC USB Debugging mode USB mass storage USB Storage Mode Multimedia Transfer Protocol Mode Media device(MTP) Picture Transfer Protocol Mode Camera(PTP) 3.9 Multimedia 3.9.1 Camera Taking Pictures 1.In the Home screen, >...
3.9.2 Video 1.Filming 2.In the camera interface can be switched to video. 3.Camera at your subject. 4.Click => To begin filming. 5.Click To stop filming. 3.9.3 Multimedia file management View Photo > Gallery. 1.On the Home screen...
2.Click on the picture you want to watch. 3.Slide the left and right horizontal touch screen, you can switch to the previous or next picture. To play the slideshow, click a slideshow 5.To share or edit the image, click on the menu to select the appropriate option. 1.Play video clips >...
3.9.5 Recorder > 1) On the Home screen Sound Recorder 2) Click Start recording. 3) Click Stop recording 4) Click Use this recording will be saved by just recorded sound files down, click Discard will not save the recording. 5) If you want to play back just recording, click to play back recordings...
Page 30
Release History Rev 1.0 2015-07-13 Model Name is changed Rev 1.1 2015-10-02...