Summary of Contents for LLUMOR FS20 STR
- Page 1 OPERATING INSTRUCTIONS Version 12/06 Wireless thermostat set „FS20 STR“ Set consists of: 1 x ‘FS20 STR’ wireless thermostat 1 x ‘FS20 ST-2’ wireless switch socket Item no. 62 04 23...
- Page 2 All company names and product names contained herein are trademarks of the respective owners. All rights reserved. Should you have any further questions, please contact our technical advisory service: Spain: LLUMOR S.C.P N-260, 18 Crta. de Lleida a Puigcerdà 25795 Castellciutat ESPAÑA Fijo: +34 973 355 504 Móbil: +34 619 77 05 56...
- Page 3 Programming the house code and address ............16 6. Initial system operation .................... 17 a) Inserting batteries into the ‘FS20 STR’, replacing the batteries ......17 b) ‘FS20 STR’ wireless thermostat controls ............18 c) ‘FS20 ST-2’ switch socket controls ..............19 d) Mounting the ‘FS20 STR’...
- Page 4 Switching between heating and cooling regulation (‘CooL’) ......38 e) Status indicator (‘StAt’) ..................39 9. Changing the battery of the ‘FS20 STR’ ..............40 10. Operating the wireless switch socket “FS20 ST-2” ..........41 a) Switching the consumer on/off manually ............. 41 b) Deleting the wireless switch socket’s programming ...........
-
Page 5: Prescribed Use
• ‘FS20 STR’ wireless thermostat • ‘FS 20ST-2’ wireless switch socket The wireless thermostat ‘FS20 STR’ functions as a temperature-dependant switch for electronic consumers in connection with an FS20 switching unit (for example, the ‘FS20 ST- 2’ wireless switch socket included in this set). -
Page 6: Explanation Of Icons
3. Explanation of icons The icon with a lightning flash in a triangle is used to alert you to potential personal injury hazards such as electric shock. The icon with an exclamation mark in a triangle points to important instructions in this user manual that must be observed. -
Page 7: Safety Instructions
4. Safety instructions The product’s guarantee becomes invalid, if the product is damaged as a result of the failure to observe these operating instructions! We do not assume any liability for any resulting damages! Nor do we assume liability for damage to property or personal injury caused by improper use or failure to observe the safety instructions. - Page 8 • Never dismantle the product! There is danger of a fatal electric shock! • This product is not a toy and should be kept out of the reach of children. Children are unable to appreciate the dangers associated with electric devices.
-
Page 9: B) Batteries And Rechargeable Batteries
• Keep batteries/rechargeable batteries out of the reach of children. • Make sure that the polarity (plus/+ and minus/-) is correct when inserting batteries/ rechargeable batteries into the ‘FS20 STR’ wireless thermostat. You will find a correspond- ing figure in the battery compartment. -
Page 10: System Description
• The separate control device (‘FS20 STR’ wireless thermostat) and FS20 switching unit (for example, the ‘FS20 ST-2’ switch socket) mean the heating, cooling or ventilating appli- ances can be positioned almost anywhere you like. • Thanks to the ‘FS20 STR’s radio transmission and battery operation, there is no need to lay cables. -
Page 11: B) Operating Principle
Operating principle The ‘FS20 STR’ wireless thermostat measures the current room temperature at its installation position and compares it to the target temperature (set either by time program or manually). The difference is used to calculate how the FS20 switching units (the ‘FS20 ST-2’ wireless switch socket, for example) need to be switched on or off to achieve the desired temperature. - Page 12 This means that there are a total of 256 different addresses (16x16 = 256). The addresses are divided into four address types (available number is in brackets): • Single addresses (225) • Function group addresses (15) • Local master addresses (15) •...
- Page 13 If you need a receiver to respond to more than one transmitter, you can program the transmitters to the same address or, if different transmitter address types have been set, you can program the receiver consecutively to these different addresses.
- Page 14 The figure below illustrates a possible configuration of different FS20 components in a house: House code, e.g. 1234 1234 Global master address 4444 Function group 44xx, e.g. 4411 ceiling lamps 111 1 114 4 112 2 441 1 114 4 444 4 Local 444 4...
- Page 15 In the example, each room has been assigned its own address group (room A: 11, room B: 12, room C: 13, room D: 14). The awning is also allocated to room B with address group 12. 15 address groups are possible: 11, 12, 13, 14, 21, 22, 23, 24, 31, 32, 33, 34, 41, 42, 43 This value must not be set to ‘44’.
- Page 16 The house code and addresses in the FS20 wireless control system are always programmed on the transmitter only (for example, the ‘FS20 STR’ wireless thermostat). The receiver (for example, the ‘FS20 ST-2’ switch socket) is set to program mode. The transmitter is then activated and the house code and the address are transmitted to the receiver.
-
Page 17: Initial System Operation
Make sure to insert the batteries correctly to avoid damage to the wireless thermostat’s electronic components. The ‘FS20 STR’ wireless thermostat can be powered using rechargeable batteries. However, due to their lower voltage (rechargeable battery = 1.2V, battery = 1.5V) and lower capacity, the period of operation and wireless range are reduced. -
Page 18: B) 'Fs20 Str' Wireless Thermostat Controls
‘FS20 STR’ wireless thermostat controls Figure 2 A Scroller for settings B ‘FUNKTION’ button C ‘PROG’ button D ‘ ‘ button LC display The battery compartment and wall holder insert are located on the back side of the ‘FS20 STR’ wireless thermostat. -
Page 19: C) 'Fs20 St-2' Switch Socket Controls
c) ‘FS20 ST-2’ switch socket controls Figure 3 A Earthed socket for consumer (up to 3680W, 230V~/50Hz, 16A) B ‘Ein/Aus’ button (On/Off) C LED (lit when socket ‘A’ is switched on) An earthed plug, which must be plugged into a socket of the public power supply system (230V~/50Hz), is on the back of the device. -
Page 20: D) Mounting The 'Fs20 Str' On The Wall
Mounting the ‘FS20 STR’ on the wall 1. Choosing a suitable installation location If you wish to mount the ‘FS20 STR’ on the wall, first select a suitable position for installation. This has to meet the following requirements: • A central position in the room in which the temperature is to be controlled or a position near a location at which the target temperature is to be measured •... -
Page 21: Mounting The Wall Holder
2. Mounting the wall holder Proceed as follows to mount the device: • Slide down and remove the wall holder on the back of the wireless thermostat. • Place the wall holder vertically against the wall with the round side pointing up, see figure 4. •... -
Page 22: E) Setting The Date And Time
e) Setting the date and time • If there is a protective film over the display, remove it. • If you have you have not inserted the batteries yet, follow the instructions for doing so on page After inserting the batteries, an automatic display test is performed (all segments and displays of the LC display briefly appear). - Page 23 • The day is displayed: DO FR SA Figure 7 Use the scroller to set the day and confirm your setting by pressing the ‘PROG’ button. • The hours are displayed: DO FR SA Figure 8 Use the scroller to set the hour of the day and confirm your setting by pressing the ‘PROG’ button.
-
Page 24: F) Connecting The 'Fs20 St-2' Switch Socket
f) Connecting the ‘FS20 ST-2’ switch socket The ‘FS20 ST-2’ wireless switch socket must be plugged into a socket connected to the public power supply system (230V~/50Hz). You can then plug a consumer (for example, a radiator) into the socket on the front side of the wireless switch socket. -
Page 25: Programming The 'Fs20 Str
7. Programming the ‘FS20 STR’ Some system settings are preset to a standard program in the factory: • Heating phase: Comfort temperature 21°C from 6.00 am to 11.00 pm • Lowering phase: Lowering temperature 17°C from 11.00 pm to 6.00 am ... - Page 26 • The lowering temperature is then displayed on the LC display. The moon symbol ‘ ’ blinks. DO FR SA Figure 11 Use the scroller to set the desired lowering temperature. To confirm briefly press the ‘ ’ button. • The wireless thermostat now returns to the normal operating mode.
-
Page 27: B) Setting/Changing The Week Profile
b) Setting/changing the week profile The time for automatic switching between the comfort temperature and the lowering temperature can be programmed to different settings for each day of the week. This way you can adapt the desired room temperature to your individual lifestyle. ... - Page 28 Briefly press the ‘PROG’ button to confirm your selection of a weekday or a block of days (weekend, weekdays, all days). • The time when the comfort temperature will be switched on is displayed (the sun symbol ‘ ’ is displayed), in our example this is ‘6:00 6:00’...
- Page 29 DO FR SA Prog Figure 15 If you set the second comfort temperature time to ‘--:-- --:--’, the setting of the second lowering --:-- --:-- --:-- temperature time is irrelevant, since nothing changes. Two different periods of comfort temperature can be set, for example, from 6.00 am to 9.00 am and from 4.00 pm to 11.00 pm.
-
Page 30: C) Operating Modes
c) Operating modes Press the ‘FUNKTION’ button to change the operating mode. Press this button briefly several times to scroll through the different operating modes: Holiday/party Automatic mode Manual mode function Figure 16 • Automatic mode In the automatic operating mode (‘Auto’ appears in the LC display) the room temperature is controlled according to the program set for the day of the week. - Page 31 Setting the holiday/party function: • Select this operating mode (suitcase symbol ‘ ‘ appears in the display) with the ‘FUNKTION’ button and set the period of time this function is to be active. During the following 24 hours the temperature will be reduced in stages every 30 minutes (party function).
-
Page 32: D) Button Lock (For Buttons And Scroller)
d) Button lock (for buttons and scroller) The wireless thermostat is equipped with an integrated key lock for the buttons and scroller, to protect the device from unintentional operation (for example, by children). Proceed as follows: • To activate the button lock, simultaneously press the ‘FUNKTION’ and ‘PROG’ buttons (briefly, for around 0.5 seconds). -
Page 33: Special Functions
8. Special functions The ‘FS20 STR’ wireless thermostat has several special functions. To activate the special functions menu, press the ‘PROG’ button until ‘Sond Sond Sond Sond’ Sond (for special function) appears in the LC display (hold the ‘PROG’ button down for around two seconds). - Page 34 a) Setting a hysteresis (‘HYSt HYSt HYSt HYSt HYSt’) A hysteresis is needed to prevent small deviations in temperature from causing permanent or frequent switching between on and off. The switch-on temperature for this should be below the target value, the switch-off temperature above.
- Page 35 c) Setting the date and time (‘dAt dAt’) • Press the ‘PROG’ button until ‘Sond Sond’ appears in the LC display. Sond Sond Sond • Use the scroller to select the ‘dAt dAt’ function. • To confirm your selection, briefly press the ‘PROG’ button. ...
- Page 36 • If you wish to change the first part of the house code, you can do so using the scroller. • Confirm the first part of the house code by briefly pressing the ‘PROG’ button. • The second half of the house code appears in the display. Example: House code ‘2223 2332’...
- Page 37 The LED on the front of the ‘FS20 ST-2’ begins to blink. • Press the ‘PROG’ button on the ‘FS20 STR’ wireless thermostat to transmit the house code, address group and subaddress. The FS20 remote switch (for example an ‘FS20 ST-2’ wireless switch socket) then automati- cally ends the program mode (see the operating instructions for the respective FS20 remote switch).
-
Page 38: D) Switching Between Heating And Cooling Regulation ('Cool')
CooL CooL’) CooL The ‘FS20 STR’ wireless thermostat can be used to switch consumers with heating functions as well as those with cooling functions (for instance, ventilators or air conditioners). In heating mode, the consumer is switched on when the room temperature is lower than the set target temperature. -
Page 39: E) Status Indicator ('Stat')
e) Status indicator (‘StAt StAt StAt StAt StAt’) When set to status indicator, the measured room temperature appears on the right side of the LC display, on the left side the consumer switching status appears as ‘An An’ (on) or ‘Aus Aus’... -
Page 40: Changing The Battery Of The 'Fs20 Str
9. Changing the battery of the ‘FS20 STR’ If the battery icon ‘ ‘ appears in the LC display, the battery voltage is low and the batteries will have to be replaced. To replace the batteries, proceed as follows: • Take the wireless thermostat off the wall holder and open the cover of the battery compartment cover (slide down in the direction of the arrow on the cover). -
Page 41: Operating The Wireless Switch Socket "Fs20 St-2
The consumer connected to the wireless switch socket should only be operated using the manual temperature setting function on the ‘FS20 STR’ wireless thermostat. Beginning in the wireless thermostat’s normal operating mode, press the ‘FUNKTION’... -
Page 42: B) Deleting The Wireless Switch Socket's Programming
However, these functions cannot be used in connection with the ‘FS20 STR’ wireless thermostat, as this only uses the ‘on’ and ‘off’ commands. If you intend to use with the wireless thermostat an existing ‘FS20 ST-2’ wireless switch socket that has already programmed with any other command settings, you must first delete those settings;... -
Page 43: Information On The Range
200 times as great. Adverse effects on sensitive people and animals are not to be expected. • The FS20 wireless control system (to which the ‘FS20 STR’ wireless thermostat and ‘FS20 ST- 2’ wireless switch socket belong) uses the 868MHz range, which is also used by other radio services. -
Page 44: Handling
12. Handling The product should only be used in dry indoor areas. Never use the product immediately after it has been brought from a cold room into a warm one. The temperature change may cause condensation water to form, which can destroy the product or lead to an electric shock. Allow the device to reach room temperature before switching it on. -
Page 45: Maintenance And Cleaning
13. Maintenance and cleaning The product is maintenance-free (except for an occasional change of the wireless thermostat’s batteries). Before cleaning the wireless switch socket, remove it fully from the power supply and unplug any device connected to the socket of the wireless switch socket. Then clean the wireless switch socket (or wireless thermostat) with a soft, clean, dry and lint-free cloth. -
Page 46: Disposal
14. Disposal a) General information Do not dispose of electric and electronic products via the household rubbish. When the product is no longer usable, dispose of it in accordance with the applicable statutory regulations. b) Battery/rechargeable battery disposal As the consumer, you are legally obliged to return all your used batteries and rechargeable batteries. -
Page 47: Technical Specifications
15. Technical specifications a) ‘FS20 STR’ wireless thermostat • Range ............. up to 100m (in free-field) • Radio frequency: ........868.35MHz • Power supply: ......... 2 x AA (alkaline recommended) • Battery life: ..........approx. 2 years • Temperature control range: ....6°C to 30°C •... -
Page 48: Quick Reference Guide
16. Quick reference guide • Insert the batteries (2xAA) into the wireless thermostat • Set date and time • Insert the wireless switching socket into a public power supply socket (230V/50Hz) with protective earth conductor • Press the ‘on/off’ control button on the wireless switch socket for at least 15 seconds until the LED begins to blink, then release the button •... -
Page 49: Declaration Of Conformity (Doc)
17. Declaration of conformity (DOC) We, Conrad Electronic, Klaus-Conrad-Straße 1, D-92240 Hirschau (Germany), hereby declare that this product complies with the fundamental requirements and other relevant regulations of directive 1999/5/EG. You can find the declaration of conformity for this product at www.conrad.com.