Page 1
__________________________________ K518ISE Key Programmer User Manual This manual is specialized for Lonsdor K518ISE, please read it carefully before operating, keep it well for further reference.
The product has a certain degree of reliability, but does not rule out the possible loss and damage. The risk arising from the user at their own risk, Lonsdor does not assume any risks and responsibilities.
K518ISE Key Programmer User Manual After a long time use, such as during working state, long charge, connect OBD to diagnose, the device may become a slight fever, this is a normal, please do not worry. The device has a built-in antenna, please do not damage or modify the antenna without authorization, to avoid performance degradation of the device and the SAR value exceeds the recommended range.
Page 4
Table of Contents Lonsdor K518ISE Basics ....................Copyright ........................Disclaimer ........................K518ISE Main Unit Maintenance ................... Battery Maintenance....................... 1. ABOUT LONSDOR K518ISE ................... 4 1.1 Introduction ....................... 1.2 Accessories ......................1.3 Application ........................ 1.4 Feature ........................1.5 Technical Parameter ....................
1. ABOUT LONSDOR K518ISE 1.1 Introduction Product Name: K518ISE Key Programmer Product Description: Lonsdor K518ISE is designed specifically for the technician and locksmiths. With tough host, powerful diagnostic functions, Android platform, wireless technology, convenient and fast online upgrade, integrated multi-function connector, K518ISE is a technologically innovative car key programming device for locksmith.
VW, Porsche, Ford, Jaguar, Land Rover, Mazda, Audi, Renault, Hummer, Hyundai, Kia Note: K518ISE is still under rapid upgrading, more functions and high end car models will be released soon, please refer to our website www.lonsdor.com for instant updating news, also you can “One key update”...
K518ISE Key Programmer User Manual 2. Three-color indicator in turn will be: red - external power supply; blue - system power; yellow - communication status 3. Capacitive touch screen: display and touch operation function. 4. Switch: press and hold for 3s to start. When in start state, press and hold for 3s to restart or shutdown, for 10s to force to restart.
After confirming activation, it will enter into Setup password interface, please set 6-digit numbers as your startup password. Then after information verification by Lonsdor (5-30 minutes, you can check the progress by clicking “Refresh” ), you will required to re-enter the password to verify, when you get the notification that verification successful, the whole process before using the device is complete.
For the OBD test cable, there are 3 connectors: Connector 1: connect K518ISE OBD port; Connector 2: connect KPROG adaptor Connector 3: connect the vehicle OBD port Before using the device, you need to make sure well connection between the device and the car.
Setting: set up basic device information Update firmware: adapter firmware upgrade & update (connect KPROG adapter with OBD test cable and connect K518ISE with 12V power supply) One key upgrade: click to update to the latest system data...
Page 13
Screen test: screen touch diagnosis Device Information: view information such as the device ID, PSN, etc. Bind adapter: first use, the adapter must be bound to K518ISE (refer to “3.5 Adaptor Binding”) Update log: update system log ...
K518ISE Key Programmer User Manual 3.4 Diagnosis description 1. Power supply 2. WIFI signal 3. Device voltage 4. Navigation bar 5. Return to home page 6. Return to the previous menu 7. Diagnosis function Diagnosis functions basically refer to key programming, pin code reading, key unlocking, and immobilization, as to the exact functions, it will be various according to different vehicles and types.
Page 15
K518ISE Key Programmer User Manual Operation: to give concrete guide for each step, some pictures and notices are attached if necessary. Attention: to emphasize all the tips and notices for all the functions, special attentions for each step, as well as possible user overlook during operation which may cause program failure.
K518ISE Key Programmer User Manual Reference interface 3.5 Adaptor Binding Please note that KPROG adapter must be bound to K518ISE before using, here is the binding process: Step 1. Connect adapter to K518ISE with mainline Step 2. Connect K518ISE with 12V power supply Step 3.