Storing Radio Station Presets - Buick Lucerne 2006 Manual

Every fifty times the vehicle is started and the navigation
system is turned on, the Caution screen will appear. If
the Caution screen appears, select OK to load the
map DVD information. If OK is not selected, all hard
keys except for NAV (Navigation) and DEST
(Destination) can be accessed. Press the NAV hard key
for this Caution screen to appear. After reading the
Caution press OK to load the map DVD information from
the map disc.
1-6
When getting started you may set the navigation system
to your preference using various options. To do so,
reference the following topics:
Language — English/Metric Units
To change the language of the navigation screens, see
"Driver Information Center, DIC Vehicle Customization"
in the Index of your vehicle's owner manual.
To change the navigation screens from English or
metric, see "Driver Information Center, DIC Controls and
Displays" in the Index of your vehicle's owner manual.

Storing Radio Station Presets

To set preset radio stations, do the following:
1. Press the O (power) knob to turn the system on.
2. Press the AUDIO hard key and select the desired
band (AM, FM1, FM2, XM1, or XM2 (if equipped)).
f
3. Use the (tune) knob or the SEEK arrows to go to
the desired station.
4. Press and hold one of the five preset screen
buttons, at the bottom of the screen, until you hear a
beep or see the station displayed on the selected
preset button.
5. Repeat the steps for each preset.
See "Storing Radio Station Presets" under Navigation
Audio System on page 3-2 for more information.