Summary of Contents for Hymair AT-280
- Page 1 INSTRUCTION MANUAL D. A. Sander (Model AT-280) Thanks for your purchasing our air tools and please read this Instruction Manual carefully and thoroughly before operating the tool to do your best jobs. Copyright to be reserved by Hymair Revision: 01 (2004)
- Page 2 Features & Functions (usually over 8 meters). The minimum hose diameter should be 1/4 I.D. and the * Swivel-free finishes from its dual action pad motion. fittings should have the same inside dimensions. But usually a 3/8 I.D. air hose is * Built-in regulator for positive speed control.
- Page 3 Abnormal vibrating -Easy hot rising at the housing lubricant or sewing machine lubricant is acceptable for this purpose. Do not use * Causes: detergent oil. Air supply is not enough (air pressure not in a required standard) 2. Before connecting the hose for operation, apply 4 or 5 drops of #10 spindle oil at the Speed controller/switch breaks down air inlet.
Need help?
Do you have a question about the AT-280 and is the answer not in the manual?
Questions and answers