Advertisement
Advertisement
Table of Contents
Summary of Contents for Emperor CWT-5500
- Page 1 CWT-5500 &MWM-1562 SERIES TINSE053C--001...
- Page 2 Table of Contents 1. Location of controls on Camera Camera Transmitter: Monitor Receiver: 2. Location of controls on Monitor 1. Receiver Frequency: 1. Transmit Frequency: 2400~2483MHz 2400~2483MHz 3. Connections/Setting up 2. Receiver Sensitivity: 2. Microwave Output Power: -80 ~ -85 dBm 94 dBu FCC/10mW(BZT) 3.
-
Page 3: Specifications
Specifications Location of controls on camera General: 1. Patch Antenna 1. Operation Frequency: 5. Operation Temperature: 2. Infra-red Lighting 2400MHz - 2480MHz -10 ~ 50 C 3. Wide-angle Camera Lens 2. Usable range: 30 ~ 50 Meter 4. Microphone 5. Off/On/Night Switch 3. - Page 4 Location of controls on monitor Connections/setting up you can link the Monitor to a Audio Function: VCR for recording what ever the camera sees. Also, you When the Monitor is switched to 1. Patch Antenna 9. Channel & timer selector can link to a conventional "Audio"...
- Page 5 Connections/setting up Connections/setting up Channel & Timer Setting AC Adaptor Use: Installing / TIMER Removing Batteries: Make sure that proper AC adaptors have been installed correctly. Use Monitor- only the AC adaptors supplied with 1. Remove the battery cover as the Monitor.
- Page 6 Connections/Setting up Connections/setting up In case of poor display quality,rotate Place the Camera in the most To prevent speaker and Microphone Battery Use: the antennas or reposition of both appropriate location for monitoring feedback noise, the Monitor should units to obtain optimal picture The monitor requires 10 size "C"...
Need help?
Do you have a question about the CWT-5500 and is the answer not in the manual?
Questions and answers