Table of Contents
Advertisement
INSTALLATION
We recommend that the BT45 be installed by a qualified
professional since all installation will involve cutting into
factory wirings.
ACC : to electric terminal controlled
by ignition switch (12V DC) ON/OFF
TelOut
power & phone/mute cable
interface module
microphone
See p. 4 for recommended
microphone locations
1. The Mute, Tel Out+, and Tel Out- wires are for additional
features available to radios with negative mute functions. Please
consult with your installation professional for details.
2. Try the AUX2 port in you are experiencing engine noise
3
Mute: optional
(white): optional
+
To module's Radio/Power port
12V: to battery's positive terminal
GND (ground): to battery negative
1
terminal or metal chassis
1
TelOut
MIC
AUX1 or (AUX2)
-
(gray): optional
1
2
3.5mm AUX cable
To factory AUX IN
or USA SPEC PA serie's
RCA port
Advertisement
Table of Contents
