Table of Contents
Advertisement
•
Repeater Mode: Under this mode, you can manually add MAC on the opposite side to corresponding AP MAC
address lists or do this through "Scan Options". This way, you can immediately strengthen and extend signals of the
wireless networks.
•
Encryption type: Three encryption modes are supported, namely WEP, TKIP and AES.
•
Encrypt Key: Enter the encrypt keys between the wireless equipment.
•
AP MAC Address: Please enter MAC address of the wireless equipment on the opposite side.
7.5 WPS Configurations
Wi-Fi Protection Settings (WPS) can easily and quickly establish an encrypted connection among clients of the
wireless network. You have no need to select the encryption mode or configure a key. You just need to enter correct
PIN code or select PBC (or press "WLAN/WPS" button indicated on the back panel) to easily configure WPS.
•
Wi-Fi Protection Settings: Used to disable or enable WPS functions. The default status is "Disable".
•
WPS Mode: Support two kinds of simple WPS settings, namely PBC (Push-Button Configuration) and PIN code.
•
PBC: select PBC and click "Save as" or press WLAN / WPS button on the back panel for about one second while
activating WPS / PBC to connect in the client port.
•
Operation Process: after clicking the WLAN / WPS button for one second, WPS light will blink about 2 minutes,
indicating that the function is activated. In this time range, the wireless client ports can activate the WPS / PBC for
authentication and consultation. After the connection is successfully connected, WPS indication light will be off and
access process of wireless client is completed. If users want to access multiple wireless client ports, users need to
repeat the process. It could support up to 32 wireless client ports to access.
•
PIN: If users want to use the PIN, users must know the PIN code of wireless client ports. Users could just add to the
input box and then save while using the same PIN code to make connection in the client ports.
•
WPS Overview: Display relevant information including current WPS status, authentication modes and encryption
types applied, and default private key indexing.
•
WPS Current Status: "Idle" means the idle status. "Start MSC Process" means that the process is enabled and the
access is on the way. "Success" means that the server and the client have reached an agreement during the
negotiation.
•
WPS Configured: "Yes" means taking effect and "Not Used" means not taking effect. Generally, if the AP-Safety
Configuration takes effect, this place will be displayed as "Not Used".
•
WPS SSID: Display master SSID numbers of the WPS. WPS is only valid for the master SSID.
•
WPS Auth Mode: The authentication mode used by WPS. WPA/WPA2-Personal mode is commonly seen.
•
WPS Encryp Type: It means the data encryption type. AES/TKIP encryption type is commonly seen.
•
WPS Key: Effective keys automatically generated by AP.
•
APN PIN: Default PIN code.
•
Reset OOB: When you press this button, the WPS service terminal is indicated as Idle and the WPS indication light
turns off. AP will not respond to connection requests from WPS clients and the safety are configured as WPA mode.
7.6 Station List
Display the user information through the wireless network card to connect to the router.
34
www.onnettechnologies.com
minut
Pocket 3G & Broadband 11n Router
Advertisement
Table of Contents
