Prima Home Bakery ABM 9 Instruction Manual page 17

YOUR FIRST LOAF
Method
1. Remove the bread pan from the machine.
2. Put the ingredients into the pan in the order they are listed above
3. When it comes to adding the yeast, make a small well in the flour
and pour the yeast granules into it. This keeps the yeast dry until the
process starts.
4. Put the bread pan into the machine, turning it clockwise to lock it
into place. Close the lid: NOTE: the machine won't work with the lid
up!
5. Press the 'PROG' button until the NORMAL programme indicator is lit
6. Press the START/STOP button to start the process
IMPORTANT: The motor doesn't start immediately. There is a warming
7. When the process is complete the machine will beep.
8. Lift the lid of the machine, then, using oven gloves or a tea towel,
turn the pan anti-clockwise and lift it out of the machine.
9. Turn the pan upside down and shake lightly until the loaf slides out.
Place the loaf onto a wire tray or rack to cool.
NOTES: The kneading blade may stay in the pan or it may come out in the
loaf – If you need to remove the blade from the loaf, wait until the loaf is
cool first. Make a small cut in the underside of the loaf and the blade
should slide out. If the blade stays in the pan simply fill the pan with
water, covering the blade. Leave it to stand for an hour. The blade should
then be easy to remove.
HOW DID IT TURN OUT?
If you followed the steps on the previous page you should have a loaf that looks and
tastes great. If not then the following information should help you identify what went
wrong. If you have a failed loaf at any time in the future you can guarantee that the
reason is here in these next few paragraphs.
17
Page
(METHOD)
period first.
Home Bakery
20
21