Advertisement
INSTRUCTIONS FOR THE ASSEMBLY AND INSTALLATION
WARNING:Please throw off the plastic jackets before assembling.
FALL HAZARD-To prevent death or serious injury
Always stay within arm's reach of your child when using the changing table. Never leave child unattended.
●
The changing table is designed for use only with this the playard. Do not use on the floor, bed, counter or other
●
surfaces.
Before each use make sure
firmly in the middle of the changing table.
Do not use changing table as a sleeping or play area.
●
Weight limit for the changing table is 25 lbs(11kg). Do not use the changing table as extra storage. Always
●
remove the
changing table when
Do not use changing table if it is damaged or broken.
●
the changing table is properly secured to the playard by pushing down
your child is in the playard.
000014
Advertisement
Table of Contents
Summary of Contents for Akarana Baby Aroha
- Page 1 INSTRUCTIONS FOR THE ASSEMBLY AND INSTALLATION WARNING:Please throw off the plastic jackets before assembling. FALL HAZARD-To prevent death or serious injury Always stay within arm’s reach of your child when using the changing table. Never leave child unattended. ● The changing table is designed for use only with this the playard. Do not use on the floor, bed, counter or other ●...
- Page 2 BEFORE ASSEMBLING THIS PLAYARD AND UNDERSTAND THE INSTRUCTIONS. INCORRECT ASSEMBLY MAY MAKE THE PLAYARD UNSAFE. DO NOT USE THIS PLAYARD IF ANY PART IS BROKEN, TORN OR MISSING. KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE ! WARNINGS Never leave children unattended.
- Page 3 Parts Details Photos are for reference only Anti-slip part playpen tubes×2 Mattress Second Bassinet Carry bag Assemble Baby Playpen 1. Take playpen out of carry bag. (as pic1） 2. T ake of f V elcro at mattress padding, then take out the playpen. (as pic2）...
- Page 4 (pic 5 - 1 ) (pic 5 - 2 ) (pic 5 2 lock parts on rail) 6.Close the fabric cap of the second lock, by attaching the Velcro. (as pic 6) 7.Pls insert the tube through on another side hole under the bassinet when the spring is POP-UP is ok, another tube is same assembling (as show 7-1 pic),then put the hooks on armrest(as show 7-2/3 pic) (pic 7-3)
- Page 5 ADJUSTED RAIL (pic 10-1) (pic 10-2) (pic 10-3) 11. Put the buckle through the hole of loop on the playpen s (as pic 11-1), after insert the buckle connect another buckle completely (as pic 11-2). another side same assembling. Adjusted the belt middle of buckle and fix with Mama’s bed.(as pic 11-3) (pic 11-3) (pic 11-1) (pic 11-2)
- Page 6 Attention:There have three buttons inside fabric covers, please hold the buttons tightly against fabric cover directly, make sure the second locking been adjusted to image 4 position, then you can hold the button very tightly and press down the knots. Please don’t use too much force to press the knots, please repeat steps 15 and steps16 if the knots not been...
- Page 7 Maintenance Wash the fabric cover of playpen’s body and double layer bassinet and mattress,please rinse it by brush,then clean out all water, put it under shadow,let it dry. For the very dirty position,please dilute detergent,then use detergent to rinse it,clean out the detergent thoroughly. Wipe out the dusts gently,then clean the playpen’s body with damp clothes,after that,erase the water by dry clothes.
Need help?
Do you have a question about the Aroha and is the answer not in the manual?
Questions and answers