Lexus NX200 2017 Owner's Manual page 69

*
1
: If the head restraint interferes with your child restraint system, and the head restraint
can be removed, remove the head restraint. If the passenger seat is equipped with a
vertical height adjuster, it must be placed in the upper most position.
Follow these procedures:
• For installing a baby seat with support base
If the baby seat interferes with the seatback when latching the baby seat into the
support base, adjust the seatback rearward until there is no interference.
• For installing a forward-facing child seat
If there is gap between the child seat and the seatback, adjust the seatback until
good contact is achieved. If the seat belt shoulder anchor is ahead of the child seat
belt guide, move the seat cushion forward.
• For installing a junior seat
If the child in your child restraint system is in a very upright position, adjust the seat-
back to the most comfortable position.
If the seat belt shoulder anchor is
ahead of the child seat belt guide,
move the seat cushion forward.
*
2
: If the head restraint interferes with your child restraint system, and the head restraint
can be removed, remove the head restraint.
*
3
: When using the rear manual seat:
Adjust the seatback to the 3rd lock position from the most upright position.
When using the rear power seat:
If there is gap between the child seat and the seatback, adjust the seatback until good
contact is achieved.
When using the left-hand rear seat for the child restraint system, do not sit in
●
the center rear seat.
Adjust the front seat so that it does not interfere with the child or child restraint
●
system.
The child restraint systems mentioned in the table may not be available out-
●
side of the EU area.
Other child restraint systems which are different from the systems mentioned
●
in the table can be used, but the suitability of the systems must be carefully
checked with the child restraint system manufacturer concerned and the
seller of those seats.
NX200t/200_OM_Europe_OM78156E
69
1-1. For safe use
1