ESSONI ES470FHD Operating Instructions Manual

47” full hd lcd tv

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

& D

NNOVATION IN

UALITY

ESIGN

47" FULL HD LCD TV

Operating Instructions

ES470FHD

Please read this manual carefully before operating your set.

Retain it for future reference.

Record model number and serial number of the set.

See the label attached on the back cover and quote this

information to your dealer when you require service.

Table of Contents

Need help?

Do you have a question about the ES470FHD and is the answer not in the manual?

Questions and answers

Summary of Contents for ESSONI ES470FHD

Page 1: Operating Instructions
UALITY ESIGN 47” FULL HD LCD TV Operating Instructions ES470FHD Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this...
Page 3: Before Using This Product
Before Using This Product BEFORE USING THIS PRODUCT PLEASE READ AND OBSERVE ALL THE WARNINGS AND CAUTIONS IN THIS USER’ S MANUAL AND RETAIN IT FOR FUTURE REFERENCE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used.
Page 5 16. Damage Requiring Service - The appliance 20. Outdoor Antenna Grounding - If an outside should be serviced by qualified service antenna is connected to the receiver, be personnel when: sure the antenna system is grounded so as A. The power supply cord or the plug has been to provide some protection against voltage damaged;...
Page 6: Features Of This Tv
FEATURES OF THIS TV High Digital Broadcasting Support This TV is designs to receive and process - Virtual Channel: Without this feature, High Definition TV (1920x1080p) with built-in normally, HD Supported Channel are stored digital tuner. and assigned at high number of channel. For - Easy to use and convenient to connect to Example, some channel in Analog is other digital devices.
Page 7 Contents Contents Before Using This Product Warning / Caution……………………………………………………………… Important Safety Instructions…………………………………………..…… Features of This TV…………………………………………………………… Getting Started Preparation……………………………………………………………………… Accessories ……………………………………………………….………… Stand Installation …………………………………………………………… Side Panel ……………………………………………………………..……. Rear Panel ………………………………………………………………..…. External Equipment Settings ……………………………………………..… Connecting an Antenna ………………………………………………….… Connecting a VCR …………………………………………………………. Connecting the cable TV or satellite with a set-top box ……………….
Page 8 Selecting the Automatic Volume Level (AVL)…………………………….. Setting Audio Language….…………………………………….…………… Setting the Digital Audio Output …………………………………………… Functions………………………………………………………………………… Setting the Auto Lock……………………………………………………….. Setting Block by Rating……………………………………………………… Setting the Closed Caption…………………………………………………. Viewing the Closed Caption………………………………………………… Setting the EPG View………………………………………………………. Set up…………………………………………………..………..……………… Setting Date / Time………………………….………….………………….. Setting Power on Time……………………….………………..……………...
Page 9: Getting Started
Getting Started Preparation Accessories Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product. User’s Remote Control 2 AA Batteries Power Cable AV cable Instruction USB gender 2 Stands 2 Stand bars 2 M8*20 screws...
Page 10: Stand Installation
Stand Installation 1. Place two stands on a stable surface. 2. Assemble the stand with the stand bars as shown. Make sure Left and right are properly placed. Make sure that the hole for bolt should be located at the back side of the stand bar. 3.
Page 11: Side Panel
Side Panel Button Description MENU Press to display MENU with TV functions Change input sources. In MENU screen, this key is used for SOURCE selecting to or toggling current settings VOLUME Adjust sound level or set the value while On Screen Menu is active CHANNEL Change channel or navigate while On Screen Menu is active...
Page 12: External Equipment Settings
External Equipment Settings Connecting an Antenna Connect an Outdoor Air Antenna / Cable Television Network with SPDIF (Optical) Output (refer rear panel information) without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed. Connecting a VCR When you connect Audio/Video composite cables using composite cable, please make sure of the colors of the jacks.
Page 13: Connecting The Cable Tv Or Satellite With A Set-Top Box
Connecting the cable TV or satellite with a set-top box Plug the Antenna cable with 75-Ohm Round Lead into the Antenna Input terminal of the Cable Box / Satellite Receiver. Using Composite (A/V) Cable - Video Connection: Connect the Video Input port of the LCD TV to the Video Output port of the Cable Box / Satellite Receiver with the Composite cable.
Page 14: Connecting A Dvd Player
Connecting a DVD player Component Connection HDMI Connection Using Component Cable (Green, Blue & Red Color). - Video Connection: Connect the Component Input port of the LCD TV to the Component Output port of the DVD Player / Video Game Machine with the Component cable. The color of the Cable and the In/Out Ports are in Green, Blue &...
Page 15: Remote Control
Remote Control Remote Control Functions Button Description 1. POWER Power on/off. 2. INPUT Press to select the input source directly. SELECTION PC / TV (Air, Cable) / HDMI1 / HDMI2 / COMPONENT 1 / COMPONENT 2 / VIDEO / S-VIDEO 3.
Page 16 Button Description 12. SOURCE The following input selection is available. TV(Air, Cable), AV1(CVBS), AV2(CVBS), AV3(S-Video), AV4(Component), AV5(Component), AV6(VGA), AV7(HDMI), AV8(HDMI) 13. PRE.CH Press to alternate between the current channel and the last channel that was displayed. 14. INFO Press to display the information of current channel.
Page 17 Button Description 19. SLEEP Press to set sleep timer. 20. SAP Press to select available “SAP” or “audio languages”. In digital channel: Depending on the particular broadcast, one or more foreign language translation maybe available. In analog channel: It is available about Mono, Stereo and SAP.
Page 18: Using The Menu Channel Settings
Using the Menu Channel Settings Selecting Tuner Mode You can choose the RF-input between off-air and cable. Select “Channel” in the Menu Press the MENU button. Press the on the remote control to highlight the “Channel” icon. Press the or OK button. Select “Tuner Mode”...
Page 19: Storing Channels Automatically
Storing Channels Automatically Your TV can memorize and store all of the available analog/digital broadcast signals for both “off-air” (antenna) and cable channels. Before your television can begin memorizing the available channels, make sure to specify the type of the signal source (antenna or cable) connected to your TV. Select “Channel”...
Page 20 Setting Channel Edit / Favorite Channels Users can store frequently watched channels to quickly access a preferred channel. Select “Channel” in the Menu Press the MENU button. Press the on the remote control to highlight the “Channel” icon Press the or OK button.
Page 21: Displaying Signal Strength
Displaying Signal Strength The function is only for Digital TV channels. Select “Channel” in the Menu Press the MENU button. Press the on the remote control to highlight the “Channel” icon Press the or OK button. Select “Signal Strength” Press the on the remote control to highlight the “Signal Strength”...
Page 22: Setting The Input Mode
Setting the Input Mode Select “Channel” in the Menu Press the MENU button. Press the on the remote control to highlight the “Channel” icon Press the or OK button. Select “External Input” Press the on the remote control to highlight the “External Input” icon. Press the or OK button.
Page 23: Picture Settings
Using the Menu Picture Settings Adjusting Picture Mode Select “Picture” in the Menu Press the MENU button. Press the on the remote control to highlight the “Picture” icon. Press the or OK button. Select “Picture Mode” Press the on the remote control to highlight the “Picture Mode”...
Page 24: Setting The Desired Picture / Dnr
Setting the Desired Picture / DNR Users can manually adjust their desired picture. Select “Picture” in the Menu Press the MENU button. Press the on the remote control to highlight the “Picture” icon Press the or OK button. Select “Brightness” Press the on the remote control to highlight the “Brightness”...
Page 25: Selecting The Aspect Ratio
Selecting the Aspect Ratio Users can manually adjust size of the screen. When the broadcaster is transmitting a 4:3 feed. >> 16:9, 4:3, Zoom1, Zoom2 and Panorama modes are available. 16:9 4:3 Source If source is 4:3, side bar is added to make 16:9 picture.
Page 26 When the broadcaster is transmitting a 16:9 feed. >> 16:9, 4:3, Zoom1, Zoom2 and Panorama modes are available. 16:9 Picture is linearly compressed to 75% on the horizontal. 16:9 Source Zoom1 If source is 16:9, picture is linearly stretched 133% on the vertical. Zoom2 Panorama Picture is cropped 4:3 region and...
Page 27: Sound Settings
Using the Menu Sound Settings Selecting the Sound Mode Users can adjust sound mode automatically. Select “Sound” in the Menu Press the MENU button. Press the on the remote control to highlight the “Sound” icon. Press the or OK button. Select “Sound Mode”...
Page 28: Adjusting The Desired Audio Mode
Adjusting the Desired Audio Mode Users can adjust sound mode manually. Select “Sound” in the Menu Press the MENU button. Press the on the remote control to highlight the “Sound” icon. Press the or OK button. Select “Treble” Press the on the remote control to highlight the “Treble”...
Page 29: Selecting The Automatic Volume Level (Avl)
Selecting the Automatic Volume Level (AVL) With this Automatic Volume Level, users can control the dynamic range for better listening environment such as night-time listening mode. Select “Sound” in the Menu Press the MENU button. Press the on the remote control to highlight the “Sound”...
Page 30: Setting Audio Language
Setting Audio Language While watching a digital program, you can listen to foreign language if the program is supported with foreign language. Select “Sound” in the Menu Press the MENU button. Press the on the remote control to highlight the “Sound” icon. Press the or OK button.
Page 31: Setting The Digital Audio Output
Setting the Digital Audio Output The digital audio output terminal allows you to enjoy digital sound. Select “Sound” in the Menu Press the MENU button. Press the on the remote control to highlight the “Sound” icon. Press the or OK button. Select “Digital Audio Out”...
Page 32: Functions
Using the Menu Functions Setting the Auto Lock This function is used to prevent from using the control buttons on the front top of the TV or from connecting external devices to the TV. You make sure to set a PIN number to use this function.
Page 33 Channel Blocking Press the on the remote control to highlight the “Channel Blocking” icon and press the or OK button. Press the button to move to the item you want. Press the OK button to lock or to unlock the channel on cursor. If the item is unlocked, such channel of the item is blocked.
Page 34: Setting Block By Rating
Setting Block by Rating This (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked. V-Chip rating and categories Rating guidelines are provided by broadcasting stations.
Page 35: Setting The Closed Caption
Setting the Closed Caption Select “Function” in the Menu Press the MENU button. Press the on the remote control to highlight the “Function” icon and press the or OK button. Select “Closed Caption” Press the on the remote control to highlight the “Closedn Caption” icon and press the or OK button.
Page 36 CaptionText In caption option, if “Options” is selected, “Caption Text” is highlighted. To select Caption Text, press the button and press the or OK button. Press the button to select the Caption Size, Caption Style, Text Color, Text Opacity, Edge Style, Edge Color, Italic or Underline.
Page 37: Viewing The Closed Caption
Viewing the Closed Caption Choices in the closed caption menu are: CC Mode, Priority (Analog caption or Digital caption), and Option. 1. CC MODE: ON: Captioning information is always shown, when available. OFF: No captioning information is displayed. 2. Priority: You can choose whether the TV uses digital or analog captions for digital TV programs that have both or either.
Page 38 3. Option: Customized closed captioning for the digital caption by choosing the settings for the following options: 1) cc Background Color: Set the color of the cc Background Auto Black White Green Blue Yellow Magenta Cyan Opacity: Specify the opacity. Auto Soled Flashing...
Page 39: Setting The Epg View
Setting the EPG View This service is only for Digital TV Model. Select “Function” in the Menu Press the MENU button. Press the on the remote control to highlight the “Function” icon and press or OK button. Select “EPG View” Press the on the remote control to highlight the “EPG View”...
Page 40: Setting Date / Time
Using the Menu Set up Setting Date / Time Yes can automatically turn on or off the TV at a present time, to do this, you must set the time it you wish to use the automatic on or off timers. Date/Time can be displayed differently as Auto mode because each broadcasting station may send different time information by channel.
Page 41 Setting the Time Zone Press the buttons on the remote control to set Time Zone. Whenever you press the buttons, Time Zone is changed in following order Pacific, Mountain, Central, Eastern, Alaska, Hawaii, and Atalantic. Manual Press the on the remote control to highlight the “Date/Time”...
Page 42: Setting Power On Time
Setting Power on Time Select “Power on Time” Press the MENU button. Press the on the remote control to highlight the “Setup” icon. Press the or OK button. Press the on the remote control to highlight the “Power on Time” icon and press the or OK button.
Page 43: Setting Power Off Time
Setting Power off Time Select “Power off Time” Press the MENU button. Press the on the remote control to highlight the “Setup” icon Press the or OK button. Press the on the remote control to highlight the “Power off Time” icon and press the or OK button.
Page 44: Setting Sleep Time
Setting Sleep Time Select “Setup” in the Menu Press the MENU button. Press the on the remote control to highlight the “Setup” icon. Press the or OK button. Select “Sleep” Press the on the remote control to highlight the “Sleep” icon. Press the or OK button.
Page 45: Selecting Menu Language
Selecting Menu Language Users can select their language preference in order to display main menus and sub menus, etc. Select “Setup” in the Menu Press the MENU button. Press the on the remote control to highlight the “Setup” icon. Press the or OK button.
Page 46: Setting Menu Opacity
Setting Menu Opacity Users can select their language preference in order to display main menus and sub menus, etc. Select “Setup” in the Menu Press the MENU button. Press the on the remote control to highlight the “Setup” icon. Press the or OK button.
Page 47: Setting Emergency Alert
Setting Emergency Alert Select “Setup” in the Menu Press the MENU button. Press the on the remote control to highlight the “Setup” icon. Press the or OK button. Select “Emerg Alert” Press the on the remote control to highlight the “Emerg Alert” icon. Press the or OK button.
Page 48: Setting Pc Mode
Setting PC Mode This function is only available in PC mode. Select “Setup” in the Menu Press the MENU button. Press the on the remote control to highlight the “Setup” icon. Press the or OK button. Select “PC Setup” Press the on the remote control to highlight the “PC Setup”...
Page 49 Support Timing Table YPbPr #item Resolution Pixel H. Frequency Remark Frequency Frequency (KHz) (MHz) (Hz) 480i 704(720*480) 13.500 29.970 15.734 480p 704(720*480) 27.000 59.940 31.470 576i 720*576 50.000 15.625 576p 720*576 50.000 31.250 720p 1280*720 60.000 45.000 720p 1280*720 59.940 45.000 720p 1280*720...
Page 50 VESA 800*600 36.000 56.250 35.156 VESA 800*600 40.000 60.317 37.879 VESA 800*600 50.000 72.188 48.077 VESA 800*600 49.500 75.000 46.875 VESA 800*600 56.250 85.061 53.674 VESA 1024*768 65.000 60.000 48.363 VESA 1024*768 75.000 70.069 56.476 VESA 1024*768 78.750 75.025 60.023 VESA 1024*768 94.500...
Page 51 VESA 1280*1024 108.000 60.020 63.981 VESA 1280*1024 135.000 75.025 79.976 VESA 1280*1024 157.500 85.024 91.146 1680*1050 146.250 59.954 65.290 VESA 1600*1200 162.000 60.000 75.000 UXGA 1920*1080 138.500 59.934 66.587 1920*1080 148.500 60.000 67.500 1080p 1920*1080 148.352 59.940 67.433 1080p In Auto, if position may not fit on the screen, select the “Position” and manually adjust the position.
Page 52: Selecting Pip/Dual Screen
Selecting PIP/Dual Screen Select “PIP ON/OFF” Button This key enables/disables PIP/Dual Screen mode. When PIP is enabled, the TV shows a full screen of video with a pip window of video on top of it. When dual screen is selected, the TV splits the screen into equally sized screens.
Page 53 4. “PIP POSITION” Button You can change PIP position in PIP state. Select “PIP SWAP” You can alter between the main source and the PIP source using this key.
Page 54: Other Information
Other Information Trouble Shooting If the TV seems to have a problem, first try the following list of possible problems and solutions before contacting a service center. If none of these troubleshooting tips apply, do not attempt to service the product by yourself. Call dealer or your nearest service center. The following symptoms may happen even if the TV has no problem.
Page 55 No color in a The Color density is adjusted to 0 or Adjust the Color density to CENTER. color picture. almost 0. Duplicated This may be caused by reflected Check if there are any tall objects such as pictures on the broadcasting signals when there is are skyscrapers near your house.
Page 56: Specifications
Specification Noise reduction Model ES470FHD HDTV compatibility Safety Agency OSD Language English, French, Display Feature Spanish Display technology TFT-LCD Closed caption DTV CC, Analog CC Screen size 47" 16:9 V-chip MPAA,TV rating, V-chip 2.0 Display Resolution 1920 * 1080 Channel edit...