Page 1
PAGE TITLE unprocess your food SALAD CHEF INSTRUCTION MANUAL MODEL DSC001...
Page 3
TABLE OF CONTENTS Table of Contents Safety Guidelines ..........4-5 Parts & Features ..........6-7 Assembly ............8-9 Using Your Salad Chef ........10-11 Maintenance ............12 Troubleshooting ........... 13 Customer Support ..........14 Warranty .............. 15...
SAFETY GUIDELINES PLEASE READ AND SAVE THIS INSTRUCTION AND CARE MANUA When using electrical appliances, basic safety precautions should be followed, including: Read all instructions. This appliance is not intended for use by • • persons (including children) with reduced Remove all bags and packaging from •...
This appliance is intended for household • use only. All components included with the Dash Go • Salad Chef are compatible with this product only. Do not use these parts on other similar products.
PARTS & FEATURES Thick Slicer Cone Great for slicing vegetables and firm fruits. Use for coleslaw, salads and fruit tarts. Thin Slicer Cone Great for radishes, mushrooms, carrots, cucumbers, fennel and celery. Coarse Shredder Cone Great for semi-hard cheeses, chunky dip & chutney, and carrot cake. Fine Shredder Cone Great for making root vegetable salads, Parmesan shreds, zucchini bread and coconut cakes.
ASSEMBLY Clean the Salad Chef and all of its components prior to assembly and use. Remove any stickers and packaging before first-time use. Place the Motor Base on a clean and stable surface. Hold the Processing Chute so that it is tilted slightly to the right and insert it into the Driving Socket.
ASSEMBLY When handling the Cones, be very careful as their blades are sharp and can cause injury. Slip the Fastener over the Drive Shaft. Be careful when inserting the Fastener as the Cone’s blades are very sharp and can cause injury. Turn the Fastener to the left until it locks into place and the Cone is fully secured.
USING YOUR SALAD CHEF DO NOT use the appliance to shred tough food such as meat. You may need to cut larger foods into pieces so that they can fit inside the Feed Tube. Place the Salad Chef on a stable and dry surface. Insert your desired Cone.
USING YOUR SALAD CHEF To change the Cone, first unplug the appliance. While holding the Cone in place, remove the Fastener by twisting it clockwise. Switch out the old Cone with the new one. To fully disassemble your Salad Chef prior to cleaning, rotate the Processing Chute clockwise and remove it from the Drive Socket.
MAINTENANCE Thoroughly clean the Salad Chef and its components prior to first–time use. Always turn off and unplug the appliance before cleaning. Your Salad Chef and its Cones must be properly cleaned after each use. WARNING: DO NOT SUBMERGE MOTOR BASE IN WATER OR OTHER LIQUIDS. THE MOTOR BASE IS NOT DISHWASHER SAFE.
TROUBLESHOOTING If your Salad Chef fails to function properly, first check whether you are able to correct the problem yourself using the checklist below. If your problem is not resolved in the instructions listed, please contact StoreBound Customer Service at: 1-800-898-6970 from 7AM - 7PM PST, Monday - Friday, or by email at support@storebound.com.
StoreBound directly at: 1-800-898-6970 from 7AM - 7PM PST, Monday - Friday, or by email at support@storebound.com. REPAIRS DANGER! Risk of electric shock! The Dash Go Salad Chef is an electrical appliance. Do not attempt to repair the appliance yourself under any circumstances. Contact Customer Support regarding repairs to the appliance.
WARRANTY STOREBOUND, LLC – 1 YEAR LIMITED WARRANTY Your StoreBound product warranted free from defects material workmanship period year from date original purchase when utilized for normal and intended household use. Should any defect covered by the terms of the limited warranty be discovered within one (1) year, StoreBound, LLC will repair or replace the defective part.
Page 16
For more information, please visit bydash.com. Customer Support 1-800-898-6970...