Controlling The Solo - Excell Solo User Manual

13
Solo User Manual
Controlling the Solo
Standby Mode
The Solo can be put into a standby mode when not in use. This will help preserve
the life of the Power Packs.
To put the unit into standby, press and hold the Left button for 2 seconds and the
standby screen (Figure 5) will be displayed. Press and hold the Left button for 2
seconds to remove the unit from standby.
Whilst in standby the output will be turned off and will disconnect itself from the
vehicle, the two USB charge outputs will also be turned off.
Figure 5 – Standby mode
INDEPENDENT SHOWROOM VEHICLE BATTERY SUPPORT