Table of Contents
Advertisement
During the installation you'll be asked to select your country. To change it after the installation is done, you
can use at+gci .
The installation should be done only once (no need to install it again every time the machine is restarted).
The modem may now be tested with Minicom: minicom -s
Please see app note:
KPPP Configurate Application Note for instructions on setting up dial up networking in KDE.
Please see release notes for HSF_Linux V4.06.06.02 for detailed information about the release.
Read the README file in order to use the right installation script:
CURRENT FEATURES AND FIXED ISSUES
Minimum System Requirements and CPU Utilization
The minimum system requirement is 150 MHz MMX CPU with 16 Mbytes RAM. The HCF modem
consumes about 5 MMX MHz in V.90/K56Flex mode and 5 MMX MHz in V.34 mode. Therefore, in a 400
MMX MHz machine in V.90 mode the HCF uses 5 MHz/400 MHz =1.25 %.
NOTE: These measurements are for Windows HCF drivers.
In the past, CPU utilization was measured using the WinBench CPUMark test. This was available through
ZDNet's Website. The most current WinBench software does not include CPUMark and will no longer
include it in future versions. We are currently evaluating new tools to measure CPU consumption. Any further
questions regarding system resource utilization can be directed towards the Application Engineering group.
Key Features of Current Release
1.
V.90 Data
Open Issues
1.
Voice and Fax are not supported. Will be included in subsequent releases.
14
Advertisement
Table of Contents
