Summary of Contents for SUNRICH TECHNOLOGY N-360
- Page 1 1-Port Parallel Server User Manual Ver. 1.00 All brand names and trademarks are properties of their Respective owners.
-
Page 2: Features And Benefits
Features and Benefits Allow multiple users to share a IEEE 1284 parallel device over the network from any networked computer Live Server status monitoring via both web browser and application software LEDs indicate for Power status and Ethernet connection ... -
Page 3: Hardware Description
Hardware Description Front Panel View Color Status Description Power LED GREEN Power ON A valid connection Ethernet LED GREEN BLINK Sending/Receiving Packets MN5000000040 Page 3... -
Page 4: Rear Panel View
Rear Panel View Note: To reset the Parallel Server, locate the reset button (hole) on the real panel of the unit. With the Parallel Server powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the Parallel Server will go through its reboot process. - Page 5 you have finished installing the Parallel Server hardware and software!!! The next section, Using Your Parallel Device Over Your Network, will guide you through the process of connecting and using your parallel device with the Parallel Server. First connect an Ethernet cable to the Parallel Server’ s Ethernet port.
-
Page 6: Web Management Interface
Installing the Parallel Server Client Utility Locate the installation CD folder “ X:\Parallel Server\AP” and then double click “ setup.exe” file to install the client utility. Follow the on-screen instructions to complete the installation. Using Your Parallel Device Over Your Network Before using the Parallel Server, connect your parallel device to the parallel port on the Parallel Server. - Page 7 button. The left panel of the web management interface provides a list of different options to choose from. Device Status: Displays which computer Parallel Server is connected to. Network: You can change the network settings according to your network specifications. If you would like to give the Parallel Server a static IP address, you will need to Disable DHCP in the DHCP Setting menu.
- Page 8 button to reboot the Parallel Server. Please note that if the Parallel Server has set password, you will need to enter it into the “ Password” field box. Reset Device: The Reset Device window will allow you to reboot the Parallel Server.
- Page 9 Factory Default: The Factory window will allow you to restore the Parallel Server to factory default. Please note that if the Parallel Server has set password, you will need to enter it into the “ Password” field box. MN5000000040 Page 9...
- Page 10 Firmware Update: The firmware update window will allow you to upload the latest firmware on the Parallel Server. Click “ Browse” to specify the firmware location on your PC. Once the location path of the firmware has been set, click “ Submit” to begin the update. Please note that if the Parallel Server has set password, you will need to enter it into the “...
- Page 11 MN5000000040 Page 11...
Need help?
Do you have a question about the N-360 and is the answer not in the manual?
Questions and answers