Download Print this page
Precision GS2010 Owner's Manual

Precision GS2010 Owner's Manual

Garden seeder/fertilizer

Advertisement

Quick Links

Manufacture's Limited Warranty for
The limited warranty set forth below is given by Precision
Products, Incorporated with respect to new merchandise
purchased and used in the United States, its possessions
and territories.
Precision Products, Incorporated warranties the product
(s) listed against defects in material and workmanship,
and will at our option, repair or replace, free of charge,
any part found to be defective in materials or
workmanship. This limited warranty shall only apply if
this product has been assembled, operated, and
maintained in accordance with the owner's manual
furnished with the product, and has not been subject to
misuse, abuse, neglect, accident, improper maintenance,
alteration, vandalism, theft, fire, water, or damage
because of other peril or natural disaster.
Normal wear parts or components thereof are subject to
separate terms as follows: All normal wear parts or
component failures will be covered on the product for a
period of one year. Parts found to be defective within the
warranty period will be replaced at our expense. Our
obligation under this warranty is expressly limited to the
replacement or repair, at our option, of parts found to be
defective in material and workmanship.
Contacting Service
Warranty parts replacements are available, ONLY WITH
PROOF OF PURCHASE, through our Customer Service
Department.
Call 1 (800) 225-5891
This limited warranty does not provide coverage in the
following cases:
1. Routine maintenance items such as lubricants and
filters.
2. Normal deterioration of the exterior finish due to use
or exposure.
3. Transportation and/or labor charges.
No implied warranty, including any implied warranty of
merchantability of fitness for a particular purpose, applies
after the applicable period of expressed written warranty
above as to the part as identified below. No other
expressed warranty, whether written or oral, except as
mentioned above, given by any person or entity,
including a dealer or retailer, with respect to any product,
shall bind Precision Products, Inc. during the period of
the warranty. The exclusive remedy is repair or
replacement of the product as set forth above. The
provisions as set forth in this warranty provide the sole
and exclusive remedy arising from the purchase.
Seeder/Fertilizer
Precision Products, Inc. will not be liable for incidental or
consequential
loss
or
damage
including,
limitation,
expenses
incurred
for
substitute
replacement lawn care services, or for rental expenses to
temporarily replace a warranted product.
Some states do not allow the exclusion or limitation of
incidental or consequential damages, or limitations on
how long an implied warranty lasts, so the above
exclusions or limitations may not apply to you.
During the warranty period, the exclusive remedy is
replacement of the part. In no event shall recovery of
any kind be greater that the amount of the purchase
price of the product sold. Alteration of safety features of
the product shall void this warranty. You assume the risk
and liability for loss, damage, or injury to you and your
property and/or to others and their property arising out
of the misuse or inability to use this product.
This limited warranty shall not extend to anyone other
than the original purchaser or to the person for whom it
was purchased as a gift.
Local Law to this Warranty
This limited warranty gives you specific legal rights, and
you may also have other rights which vary from state to
state.
Warranty Period
The warranty period stated below begins with the Proof
of Purchase. Without the proof of purchase, the
warranty period begins from the date of manufacture.
Product Warranty Period
The warranty period for this product is as follows: All
parts are covered for 1 year.
12
without
or
Manual Contents
Safety Instructions
Assembly
Parts
Operation
Maintenance
Warranty
Caution: Carefully read all Rules and Instructions for Safe Operation
Owner's Manual | GS2010 | Garden Seeder/Fertilizer
Your New Garden Seeder/Fertilizer
2
Congratulations on your purchase of a new
4-5
Precision Products Inc. Garden Seeder/Fertilizer.
6
Your Seeder/Fertilizer has been engineered and
7
built to give you the most dependable and best
7
performing product possible.
8
If you experience any problem you can not easily
resolve,
please
feel
knowledgeable
and
helpful
department toll-free at 1 (800) 225-5891.
free
to
contact
our
customer
service
(Rev. 10/09)

Advertisement

loading

Summary of Contents for Precision GS2010

  • Page 1 Manufacture’s Limited Warranty for Seeder/Fertilizer Owner’s Manual | GS2010 | Garden Seeder/Fertilizer The limited warranty set forth below is given by Precision Precision Products, Inc. will not be liable for incidental or Products, Incorporated with respect to new merchandise consequential...
  • Page 2 STOP store prior to contacting Precision. 2. Next, set the planting depth with the wedge At Precision Products Inc. our goal is to deliver shaped furrowing shoe located directly under the quality, value and outstanding service. If for any Carton Contents hopper.
  • Page 3 Parts Used During Assembly Parts are attached to unit prior to assembly. Part No. Description Part No. Description Shown Full Size Not Shown Full Size GS2010-22 Row Marker Tube GS2010-01 Hopper GS2010-23 Row Marker GS2010-02 Plug GS2010-24 Row Marker Tube Cap...
  • Page 4 Assembly Instructions 6. Take Furrow Shoe and Furrow Shoe Clamp, joining them together using two 1/4‖ x 5/8‖ Carriage Bolts and two 1/4‖ Wing Nuts. Do not tighten until you place them onto the Seed Feeder Tube and set at the Tools Required for Assembly appropriate height.
  • Page 5 5. Assemble Row Marker to Row Marker Bracket using 5/16‖ x 1—3/4‖ Hex Head Bolt, 5/16‖ Flat Washer, 2. Insert the Upper Handle Tube into Lower Handle Tube and place Seed Cover between Handle Tubes and Spring then another 5/16‖ Flat Washer and a 5/16‖ Lock Nut. Do not fully tighten hardware. Allow Row Seed Hopper then secure with two 1/4‖...
  • Page 6 3. Place unit in a vertical position with the Fertilizer Hopper facing up, place the Bolt into the Fertilizer Lever, 4. Assemble Row Marker to Row Marker Tube with 1/4‖ x 5/8‖ Carriage Bolt and 1/4‖ Wing Nut. Place Marker then into the corresponding hole in the Hopper.