Dell POWERVAULT MD3200I Configuration Manual page 24

Dell PowerVault MD3200i/MD3600i Configuration Guide for VMware ESX4.1 Server Software
Figure 10: Enabling iSCSI Software Initiator (continued)
S 7: B VM P SCSI S I
TEP INDING KERNEL ORTS TO I OFTWARE NITIATOR
This next step will bind the VMkernel ports, which were configured in Step 4 earlier, to
the iSCSI Software Initiator. If this step is skipped there will only ever be a single
connection to the PowerVault SAN. This step must be done via vCLI.
The first thing to do is to note the vmhba# of the iSCSI Software Initiator. This can be
seen in the vCenter GUI on the ESX host under Configuration -> Storage Adapters.
Figure 11: Binding VMKernel Ports
June 4, 2012 Page 24