Table of Contents
Advertisement
4 Instruction For Use
•
Carefully unpack the appliance and remove all packaging materials.
•
Clean and dry the top cover thoroughly in warm soapy water.
•
Fill the measuring cup level to the top with corn kernels. Do Not Heap.
•
Remove top cover and pour the corn kernels into popping chamber.
•
Replace top cover and place a heat resistant bowl beneath the chute.
•
Place the measuring cup into its position in the top cover.
•
Plug appliance into power socket.
•
Turn the switch to position "I" (On). Appliance will start operating.
•
The popping process will take a few minutes to start as the corn
kernels need to get very hot to pop.
•
Do not remove bowl while popping is in progress.
•
When corn has stopped popping set the switch to position "O" (Off).
•
Fresh corn kernels give best results.
•
Once the pack of corn kernels is opened, it should be stored in an
airtight container in the fridge.
NOTE: Do not use oil, margarine or butter etc. in the popping chamber.
Doing so may result in personal injury and will damage the appliance. Only
add the flavourings to the popped corn in the collection bowl below the
chute.
DO NOT touch the top cover or measuring cup whilst hot.
completely cool before touching.
•
Between each use, remove any un-popped corn from the popping
chamber. Allow unit to cool first.
Page 7 of 10
Allow to
Advertisement
Table of Contents
