Advertisement
Quick Links
Channel
PERFORMANCE MULTI-ROOM VIDEO
Modulator
Installation Manual
pwr
program
model 5415 digital modulator
model 5415 digital modulator
Frequency-Agile
Video Modulator
Model 5415
This device complies with the FCC's Part 15 Rules for TV
interface devices. Any change or modification to this
device without the permission of Multiplex T echnology, Inc.
may void the user's authority to operate this equipment.
multiplex
technology , inc.
3001 Enterprise Street, Brea, CA 92821-6213, U.S.A.
714-996-4100 * 800-999-5225 * FAX 714-996-4900 * www.channelplus.com
pll frequency control
pll frequency control
®
Controls and Connections
R
The ChannelPlus 5400 Series are digitally-tuned video modulators that convert any
baseband video and audio signal to a user-selected UHF, or Ultraband CATV. An
internal quartz crystal reference oscillator and PLL circuitry ensure drift-free
performance. The user selects the output frequency (channel) using the "program"
button to enter the number of the desired channel. Any TV connected to the output
via coax can receive the signals, when the TV is tuned to the proper channel.
Model 5415 - Single channel agile modulator
pwr
program
model 5415 digital modulator
model 5415 digital modulator
OUTPUT
pll frequency control
pll frequency control
POWER
POWER
15VDC
15VDC
300mA
300mA
AUDIO
VIDEO
AUDIO
R
L
2
LOOP
Advertisement
Related Manuals for ChannelPlus 5415 series
Summary of Contents for ChannelPlus 5415 series
- Page 1 Channel Controls and Connections The ChannelPlus 5400 Series are digitally-tuned video modulators that convert any baseband video and audio signal to a user-selected UHF, or Ultraband CATV. An internal quartz crystal reference oscillator and PLL circuitry ensure drift-free PERFORMANCE MULTI-ROOM VIDEO performance.
- Page 2 Sample System Diagram Programming Examples: To program modulator to channel In this system, CATV or antenna channels are available on all TVs. In addition the following channel has been added: program Channel 70 - Satellite receiver program Press button model 5415 digital modulator model 5415 digital modulator pll frequency control pll frequency control...
- Page 3 Also, cable companies often have extra signals where there should be none. Try moving the ChannelPlus channel to another number. You may have to add a low pass filter to remove cable company noise.
- Page 4 Changing modulation standards Cable HRC and IRC considerations Most cable services use IRC frequency assignments. This is the default for the ChannelPlus 5400 series modulators. However, if the cable service uses HRC or the TV appears to search for the "house channels," the...