Related Manuals for Dante DLA6340
Summary of Contents for Dante DLA6340
- Page 1 DLA6340 4D Keyboard Installation and Operations Manual Model Number: DLA6340 RS-232, RS-422, RS-485 and TCP/IP Description: PTZ Dome, DVR, NVR and CMS 4D Keyboard/Controller...
- Page 2 Table of Contents 1 1 1 1 OVERVIEW AND CONTROL OVERVIEW AND CONTROLS S S S ..............5 OVERVIEW AND CONTROL OVERVIEW AND CONTROL Front Panel ..........................5 Front Panel Front Panel Front Panel Function Buttons List ......................5 Function Buttons List Function Buttons List Function Buttons List Rear Panel ..........................
- Page 3 2.3.2 Device List ......................... 13 2.3.3 Input List ..........................13 2.3.4 Output List .......................... 13 2.3.5 Remote Operation (Network Connection) ..............13 2.3.5.1 Shortcut Operation ....................14 2.3.5.2 Local Preview......................14 2.3.5.3 Decoder Operation ....................14 2.3.5.4 Playback ........................15 2.3.5.5 PTZ ..........................
- Page 4 Welcome Thank user for purchasing our network keyboard! This quick start guide is designed to be a reference tool for the operation of userr system. Before the operation please read the following safeguards and warnings carefully! Please keep it well for future reference.
- Page 5 Important Safeguards and Warnings 1． ． ． ． Electrical safety All installation and operation here should conform to userr local electrical safety codes. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation. 2．...
-
Page 6: Front Panel
1 1 1 1 Overview and Controls Overview and Controls Overview and Controls Overview and Controls 1.1 Front Panel Front Panel Front Panel Front Panel This series products’ front panel is shown as below. See Figure 1-1. Figure 1-1 It includes seven panes. Name Name Touch panel... - Page 7 Indication light RX/TX The light becomes on when the wire network data is sending or receiving properly. Wireless WIFI The light becomes ion when it connects to the indication light wireless network properly. PTZ shortcut button control GOTO Preset AUTO PAN PATTERN Pattern ZOOM+...
- Page 8 file. In menu setup interface, user may skip to the previous item. Play next When playback, click it to play the next file. In menu setup interface, user may skip to the next item. AUX button. Working with number buttons. buttons Macro setup.
-
Page 9: Login
2 2 2 2 Overview of Navigation and Controls Overview of Navigation and Controls Overview of Navigation and Controls Overview of Navigation and Controls Before operation, please make sure: The supplying power and the device power are matched. 2.1 Login, Logout & Login, Logout &... -
Page 10: Shutdown
2.1.2 Shutdown After user logged out the system, user may press the power button to turn off the keyboard. 2.2 Admin Operation Menu Admin Operation Menu Admin Operation Menu Admin Operation Menu 2.2.1 Main Menu After user login, user may see the main interface includes six buttons: System Settings, Device Manager, Input Settings, Output Settings, Account and Shutdown. -
Page 11: Hardware Settings
connection if user want to connect again. Click OK button, the WIFI working information can display current connection status after it successfully established the connection. 2.2.2.3 Hardware Settings Here user may set key sound, key backlight, auto lock time, screen auto off time and etc. 2.2.2.4 Default Here user may check the corresponding item to restore factory default setup. -
Page 12: Input Settings
IP Search Click IP search button, user may go to the IP search interface. Please click the Refresh button to begin search and user may view the searched result in the IP search interface. User may check the box to select a device and then input the user name and password, click the Add button to add a device. -
Page 13: Output Settings
Important The SN of the monitor position name shall unique. Otherwise system may pop up a dialogue box “The channel name shall be unique. Please input again.” 2.2.5 Output Settings Click output settings button, user may go to the corresponding interface. Modify In output settings interface, click Modify button, user may go to the corresponding interface to change the output SN. -
Page 14: Device List
2.3.2 Device List On the Device list interface, user may view the device that current user may control. 2.3.3 Input List Here user may view the channel information of controlled device. Please note the position name is the channel name system gets from the device. Sync Click the Sync button;... -
Page 15: Shortcut Operation
2.3.5.1 Shortcut Operation Remote operation User may view current selected output channel on the left pane. Here user may select window display mode, the decoded input channel of each window and set other shortcut ways. User may view current input information and some shortcut setup on the right pane. 2.3.5.2 Local Preview Local preview is to decode and playback the signal from the input channel at the keyboard local-end. - Page 16 If user want to enable local video preview function, there are two ways: Input number j+WIN to select window and click ENTER button, click ENTER button again to close current preview. Input number j+WIN. Select one window and click （PREV）, user may increase or decrease （NEXT）or current video channel number and then output it to current select window.
-
Page 17: Playback
Input m+MON-G, it is to select the output group m. Input n+CAM-G, it is to output the input group n to the output group m to enable the tour function. 2.3.5.4 Playback of the decoder record It is to control the output channel to playback the record file of the decoded input channel remotely. - Page 18 video from the control channel on the left pane and the PTZ control interface on the right pane. User may input number i+PT to open PTZ operation interface. The number i is the channel number user input. The PTZ interface is shown as below. See Figure 2-3. Figure 2-3 User may input the number (Step, preset and etc) from the panel.
-
Page 19: Audio Talk
GOTO Preset PATTERN Pattern start /Stop TOUR Tour start /Stop AUTOPAN Pan start /Stop 2.3.5.6 Audio Talk User may use the audio talk function to realize the bidirectional talk between the keyboard and the selected device. Here we use “a+AUX” to enable the audio talk function. See chapter 2.3.9.3 for audio talk function setup. -
Page 20: Record
Please follow the steps listed below. Input number i+WIN, it is to select the window i for the output channel. Input a+AUX (Please make sure user have set a+AUX as the snap shortcut button) or button at the top of the joystick to enable network snap. If user click the snapshot shortcut button directly, system snapshots the video in the first window by default. - Page 21 Figure 2-6 Important In anytime, system can only record in one mode. User may not enable these two modes at the same time. The remote record stops once user exit the remote control interface. In the preview mode, click the REC button directly; system begins record the first window by default.
-
Page 22: Remote Panel Simulation
2.3.5.9 Remote Panel Simulation In this mode, it works as the front panel. It simulates the front panel of the DVR. It supports shuttle/jog, number, record, playback, PTZ, OK, ESC and etc. Please follow the steps listed below. Input number i+DEVC+ENTER, number i is the DVR SN in the Device manager interface or the device list. -
Page 23: Remote Operation (Rs232)
One-window/multiple-window mode switch Use the jog (inner dial) to select the window amount and use the shuttle (outer ring) to switch the displayed channel. Click the number button to go to the selected channel. For example, click number 1; user may see channel 1. -
Page 24: Remote Operation (Rs485)
Record Click the REC button, user may go to the Record interface. User may use the shuttle/jog to set the channel number and status. Click the ENTER button to save current setup and click the ESC button to exit. One-window/multiple-window mode switch Use the jog (inner dial) to select the window amount and use the shuttle (outer ring) to switch the displayed channel. -
Page 25: Local Preview Mode
Figure 2-9 Please refer to the following sheet for detailed information. Name Function ① Preview User may preview in the pane. User may select input channel and ① Input/output list output channel in the pane. Set window display mode in current ①... -
Page 26: Decoder Mode
Select window display mode on the window split pane. Select a window; double click an input channel on the input list or user may drag one channel to a window directly. Now user may preview the video from the selected channel on current window. -
Page 27: Advanced
Close preview: Click it to close current preview video. Close window: Click it to close current window. Close all: Click it to close all windows. Open all: Click it to open all windows. 2.3.9 Advanced The advanced interface is shown as below. It includes: RS23, modify password, AUX, decode, MAC, snapshot, and backup. -
Page 28: Backup
Click Snapshot button on the Advanced interface. User may see an interface. Check the Enable box to open snapshot function and input FTP server IP, port, username, password and etc. If user do not check the Enable box here, system does not connect to the FTP server. At the same time, if user have inserted a flash disk, all the snapshot pictures will be saved on the flash disk. -
Page 29: Set Scheme
Double click the splicing video wall user want to operate or input number i+MON on the keyboard, user may see an interface shown as below. See Figure 2-11. Figure 2-11 Please refer to the following sheet for detailed information. Name Function Preview Real-time display screen, window, video source,... - Page 30 User may also click number j+MULT to operate. There are two situations: User have selected a screen under the scheme mode, but there is no display, input number j+MULT to update screen contents. Once user switch to one screen, input number j+MULT, user may see screen display on j-window.
-
Page 31: Ptz Control
video source to the selected window. Tour setup: In the Input and output setup interface, user may set tour time. When input the customized folder and the channel amount on the folder is larger than the output channel amount, system enables tour automatically. See Figure 2-13. Figure 2-13 Click the control tour of the or click the TOUR on the keyboard, user may close... - Page 32 Appendix Appendix Appendix Appendix Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Component Name Cr VI PBDE Device ○...