Advertisement
VEC431_Manual_080505
8/5/05
5:10 PM
ONE YEAR LIMITED WARRANTY PROGRAM
This limited warranty program is the only one that applies to this product, and it sets forth all the
responsibilities of Vector Manufacturing, regarding this product. There is no other warranty, other than those
described herein.
This Vector Manufacturing product is warranted, to the original purchaser only, to be free of defects in
materials and workmanship for one year from the date of purchase without additional charge. The
warranty does not extend to subsequent purchasers or users. Manufacturer will not be responsible for any
amount of damage in excess of the retail purchase price of the product under any circumstances. Incidental
and consequential damages are specifically excluded from coverage under this warranty.
This product is not intended for commercial use. This warranty does not apply to accessories or damage to
units from misuse or incorrect installation/connection. Misuse includes wiring or connecting to improper
polarity power sources.
RETURN/REPAIR POLICY: Defective products, other than accessories, may be returned to manufacturer. Any
defective product, other than accessories, that is returned to manufacturer within 30 days of the date of
purchase will be replaced free of charge. If such a product is returned more than 30 days but less than one
year from the purchase date, manufacturer will repair the unit or, at its option, replace it free of charge.
If the unit is repaired, new or reconditioned replacement parts may be used, at manufacturer's option. A
unit may be replaced with a new or reconditioned unit of the same or comparable design. The repaired or
replaced unit will then be warranted under the terms of the remainder of the warranty period. The customer
is responsible for the shipping charges on all returned items after 30 days. During the warranty period,
manufacturer will be responsible for the return shipping charges.
LIMITATIONS: This warranty does not cover accessories, bulbs, fuses and batteries, defects resulting from
normal wear and tear (including chips, scratches, abrasions, discoloration or fading due to usage or
exposure to sunlight), accidents, damage during shipping to our service facility, alterations, unauthorized
use or repair, neglect, misuse, abuse, failure to follow instructions for care and maintenance, fire, flood and
Acts of God.
If your problem is not covered by this warranty, call our Technical Support Department at (954) 584-4446
or toll free at (866) 584-5504 for general repair information and charges if applicable. You may also
contact us through our website at www.vectormfg.com.
STATE LAW RIGHTS: This warranty gives you specific legal rights. Some states do not allow limitations on
how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages,
so the exclusions or limitations stated herein may not apply. This warranty gives the purchaser specific legal
rights; other rights, which vary from state to state, may apply.
TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT: Contact Technical Support by telephone, fax or
mail (see below). We suggest that you keep the original packaging in case you need to ship the unit. When
returning a product, include your name, address, phone number, dated sales receipt (or copy) and a
description of the reason for return and product serial number. After repairing or replacing the unit, we will
make every effort to return it to you within four weeks.
WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Vector Manufacturing.
Enter "VEC431" as Model and "FM Transmitter Charging Dock for iPod
products must be registered within 30 days of purchase to activate this warranty. Mail the completed
registration form, along with a copy of the original sales receipt to:
ATTN.: CUSTOMER SERVICE
4140 SW 30th Ave., Ft. Lauderdale, FL 33312
• TOLL FREE: (866 ) 584-5504 • FAX: (954) 584-5556 •
WARRANTY IS NON-TRANSFERABLE AND NON-REFUNDABLE.
© 2005 VECTOR MANUFACTURING
MADE IN CHINA
Page ii
" as Product Type. All Vector
®
RD080305
ii
IMPORTANT SAFETY INSTRUCTIONS
WARNINGS
1. To reduce the risk of electrical shock, do not expose this unit to rain or moisture, or
submerge it in water.
2. DO NOT attempt to connect or set up the unit or its components while operating
your vehicle. Inattention to the road may result in a serious accident.
3. Do not position the External Antenna in such a way that it impedes the driver's
access to vehicle controls or visibility.
CAUTIONS
1. Use only the supplied 12 volt DC power adapter for powering this unit.
2. Make sure your vehicle's accessory outlet is 12 volt DC and negative ground (common in most
vehicles).
3. Turn the FM Transmitter Charging Dock OFF before connection to a power source.
4. Never insert anything other than the supplied DC power adapter into the 12 volt DC power socket
on this unit. Do not use any accessory not recommended or provided by the manufacturer.
5. Follow all warnings, cautions, and instructions marked on this unit and contained in this User's
Manual.
6. The external antenna should be attached securely to the wall of your vehicle in a position where it
will not be subjected to undue stress.
7. For protection during violent storms, or when left unattended or unused for long periods of time,
unplug the 12 volt DC power adapter and disconnect the external antenna.
8. To prevent possible electrical damage to unit or your vehicle, always unplug the 12 volt DC adapter
cord from your vehicle's accessory power outlet BEFORE removing the plug from the unit.
9. Do not open this unit. There are no user replaceable parts.
10. Check unit periodically for wear and tear. Replace worn or defective parts immediately. Contact
Vector's Customer Service department, toll-free (866) 584-5504.
Read This User's Manual Before Installing or Using This Unit.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
SAVE THESE INSTRUCTIONS
iii
Advertisement
