Summary of Contents for Hilka S1J-AJ10-10
- Page 1 9.6V Rotary Tool Kit Model: S1J-AJ10-10 Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.
-
Page 2: Power Tool Use And Care
SAFETY & OPERATING INSTRUCTIONS Please retain these instructions for future use and referral. READ THESE INSTRUCTIONS IN FULL BEFORE ATTEMPTING TO USE THE ROTARY TOOL KIT. Safety This equipment is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the machine by a person responsible for their safety. - Page 3 Spindle clamp Grinding disks Locking spanner Mounted brushes Set of collets Charging adaptor: 12V ac Technical Specifications Rotary Drill Model: S1J-AJ10-10 Voltage: 9.6V dc No Load speed: 2500 to 5000 / min Mains Charger Voltage: 220 – 240 Vac Hertz: 50 Hz...
- Page 4 Assembly of accessories • Remove the spindle clamp (6) by pressing down on the spindle lock (5) and unscrewing the spindle clamp. If the spindle clamp is locked ON it will be necessary to use the locking spanner (7). • Insert a suitable sized collet (8) for the attachment to be used and replace the spindle clamp. •...
-
Page 5: Special Safety Instructions
Battery Charging • Remove the battery from the unit by pressing both sides of the battery to release the catches • Place the battery into the charger base (3) • Insert the charger base lead into the charging adaptor (16) •... - Page 6 If faults cannot be remedied, contact the Helpline on 020 8391 6767 Helpline@hilka.co.uk GUARANTEE This product is guaranteed for domestic use for a period of 12 months against faulty manufacture or materials. This guarantee does not affect the statutory rights of the consumer. In the event of any problem occurring please contact our Helpline at the number above for advice.
Need help?
Do you have a question about the S1J-AJ10-10 and is the answer not in the manual?
Questions and answers