Summary of Contents for FUDAKANG INDUSTRIAL CO. FT-F11-BT
- Page 1 Instruction for Use lnfrared Thermometer (Contact Type) FT-F11-BT,FT-F21-BT, FT-F12-BT, FT-F22-BT FT-F11, FT-F21, FT-F12, FT-F22 UO8080, UO8080E - 1 -...
- Page 2 INFRARED THERMOMETER (FT-F11-BT, FT-F21-BT, FT-F12-BT, FT-F22-BT; FT-F11, FT-F21, FT-F12, FT-F22, UO8080, UO8080E) Operating Instruction Please read carefully before use. DESCRIPTION 1. Table of Contents 1. Product Listing 2. Product Overview 3. Outline Drawing 4. The Definition of Symbols 5. Measuring 6.
-
Page 3: The Definition Of Symbols
Fahrenheit Scale Low Battery Last Memorized Temperature Display 5. Measuring 1) Ear Measuring Mode (Figure 5.1) (Suitable for FT-F11, FT-F11-BT, FT-F21, FT-F21-BT, FT-F12,FT-F12-BT,FT-F22,FT-F22-BT,UO8080, UO8080E) Turn on the “power” button key of the IR Thermometer and then all displayed segments ●... -
Page 4: Measuring
temperature unit“ ” or “ ” blink it’s ready to measure, please see on( Figure 5.4) Insert the IR Thermometer probe into the ear canal as on the following (Figure 5.1); Pull ● the ear slightly back ward to straighten the ear canal. Then insert the probe into the ear as far as it goes. -
Page 5: Battery Voltage Display & Replacement
3） “ ” and “ ” adjust (Suitable for FT-F11， FT-F21,FT-F11-BT,FT-F21-BT, UO8080, UO8080E) ● On power off condition, press the “SCAN” button key about 5 seconds until the displayed screen appears “ ” and “ ” or “ ” temperature unit blinks . In this condition, - - - press the “SCAN”... -
Page 6: Operation Precautions
7. Operation Precautions 1). Please insert the battery into the bracket when do you use the IR Thermometer on first time. 2). Please keep the probe clean after you used the IR Thermometer. 3). Please keep the IR Thermometer dry and never immerse it in water or any liquid. 4). -
Page 7: Specifications
Pressure: 86~106 kPa -25.0℃-55.0℃(-13.0℉- 131.0℉) Rh≤95% Storage Condition Pressure: 86~106 kPa AAA 2pcs （ Suitable for FT-F11 ， FT-F21 ,FT-F11-BT FT-F21-BT, UO8080, UO8080E） 1 PC 2032 button battery （Suitable for FT-F12，FT-F22 ,FT-F12-BT Battery type and battery life FT-F22-BT） The typical service life of the new and unused batteries is 300... - Page 8 Bluetooth Version Bluetooth 4.1 BLE Bluetooth Modulation Type GFSK Specially Voice Function for Model no.FT-F11, FT-F21, FT-F11-BT, FT-F21-BT, UO8080, UO8080E 1. When the IR thermometer is ready, you can hear“Please measure”voice or other languages voice. 2. When the measurement is finished, the IR thermometer shall report the measured temperature data.
-
Page 9: Common Question Concerning Forehead Temperature
10. Common questions concerning forehead temperature: 1). What is the forehead temperature? Forehead temperature is the same temperature as the arterial blood supply under the skin. It is the best determinate of body temperature, and unaffected by the artificial errors and time delays of oral and rectal methods. - Page 10 descriptions, calibration instructions to assist to service personnel in parts repair. Notes: If you have any problems with this device, such as setting up, maintaining or using, please contact with service personnel of . Don’t open or repair the FUDAKANG INDUSTRIAL CO.,LTD device by yourself.
- Page 11 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Page 12 guidance Electrostatic discharge ±6 kV contact ±6 kV contact Floors should be wood, concrete or (ESD) ±8 kV air ±8 kV air ceramic tile. If floor are covered with IEC 61000-4-2 synthetic material, relative humidity should be at least 30%. If ESD interfere with the operation of equipment ,counter measurements such as wrist strap, grounding shall...
- Page 13 Portable and mobile RF communications equipment should be used no closer to any part of the , including [EQUIPMENT or SYSTEM] cables, than the recommended separation distance calculated from equation Conducted RF applicable to the frequency of the transmitter. IEC 61000-4-6 150 kHz to 80 MHz Not applicable Recommended separation distance...
- Page 14 Recommended separation distances between [EQUIPMENT or SYSTEM] portable and mobile RF communications equipment and the s intended for use in an electromagnetic environment in which radiated RF [EQUIPMENT or SYSTEM] i disturbances are controlled. The customer or the user of the can help prevent [EQUIPMENT or SYSTEM] electromagnetic interference by maintaining a minimum distance between portable and mobile RF...
- Page 15 Symbol for ‘CE” Symbol for “electrical and electronic equipment” Symbol for “TYPE BF APPLIED PART” Symbol for “Follow operating instructions” IP22 Symbol for “the IP classification” Symbol for “ RF transmitters” Manufacturer: FUDAKANG INDUSTRIAL CO.,LTD Address :No.8 Yinghe Road, Yuanjiangyuan Management Zone, Changping Town, Dongguan, Guangdong China.
Need help?
Do you have a question about the FT-F11-BT and is the answer not in the manual?
Questions and answers