Switek LIU-0816WN User Manual

Ip pdu

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

User Manual

IP PDU

Caution:

This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is

subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this

equipment. Such modifications or change could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

1 / 8

Table of Contents

Need help?

Do you have a question about the LIU-0816WN and is the answer not in the manual?

Questions and answers

Summary of Contents for Switek LIU-0816WN

Page 1 User Manual IP PDU Caution: This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 2 Product function: LIU - 0816 - WN is a kind of PDU product which can provide a steady power supply better for the server. LIU - 0816 - WN can provide relevant information for users and makes corresponding measures of warning or overload power by monitoring the electricity and environment status.
Page 3 Product Diagram •– ”—…– ‹ ‘• 1、 Power Input Socket IEC320 C20 2、 Output Socket IEC C13 3、 Reset Key 4、 Function Key, Check the machine ip adress 5、 Meter Panel, Display voltage, current, temperature, humidity, etc 6、 Network Port, Connect LAN or WAN 3 / 8...
Page 4 Using Directions: 1. Equipment connection Connect LIU - 0816-8 IEC C13 output plug with one side of the output line, connect 8 output line respectively with the power input end of the server which needs power supply. Connect one side of input line plug with the LIU - 0816 - WN IEC320 C20 input socket, and the other side with the AC power supply socket.
Page 5 ③ . The power port control Click "Socket" in the control bar which is on the left side of the interface , display as shown below. Users can start or shut off LIU - 0816 - WN 8-way output in this interface. Start all: click drop-down box behind the action box, choose “Start”, click the “Apply”...
Page 6 Users can start or shut off time-delay of LIU - 0816 - WN 8-way output. The picture above is the factory Settings, it means that the 8 circuit of LIU - 0816 - WN will output from the 1 to the 8 port in sequence in the interval of one second after connecting with power.
Page 7 ⑥ . The user name and password setting Click “user”in the configuration box which is on the left side of the interface, display interface as shown below. The login user name and password of LIU - 0816 - WN can be modified in this interface. After filling in the original and new user name, password and password confirmation respectively, click apply button, the new user name and password will be used at the next time login LIU - 0816 - WN.
Page 8 Host name: The name showed in the LAN, users can set itself IP address: The current LAN IP address of LIU - 0816 - WN Subnet mask: The current LAN subnet mask of LIU - 0816 - WN Gateway: The current gateway of LIU - 0816 - WN Enable the DHCP: The superior router of the current LAN will distribute network parameters automatically for LIU - 0816 - WN, it will come into force after clicking the apply button Primary DNS IP refer to the supervisor router setting of current LAN...