Next 780455 Assembly Instructions Manual

Ashdown stove suite

Advertisement

Quick Links

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

Tools Needed

Helpline

If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: 0844 844 8999
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is
found to be faulty. Should you need to return the unassembled product, please repack in the original packaging.
Please see instructions guide for reference.

IMPORTANT

Suites are designed to be freestanding and should not be permanently secured or sealed to the wall.
Read all instructions before using this heater. When using an electrical heating appliance basic precautions
should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the
following:
• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible
materials such as furniture, pillows, bedding, papers, clothes, and curtains at least 1 metre from the front of
the heater and keep them away from the sides and rear.
• Extreme caution is necessary when any heater is used near children whenever the heater is left operating
and unattended. The guard is to reduce the risk of fire or injury from burns and no part of it should be
permanently removed. It does not give full protection for children.
• Always unplug the heater when not in use. To disconnect heater, turn controls to off, then remove the plug
from the socket.
• Do not operate a heater with a damaged power cord or plug or after a heater malfunctions, has been
dropped or damaged in any manner. Return heater to authorised service facility for examination, electrical or
mechanical adjustment, or repair.
• Do not use this heater outdoors.
• Do not use this heater in bathrooms.
• Do not run the power cord under carpeting. Do not cover the power cord with throw rugs, runners, or other
like.
• Connect to properly earthed sockets only. The earth should comply with current IEE regulations.
• Do not insert or allow foreign objects to enter the ventilation opening as this may cause an electric shock
or fire, or damage the heater.
• To prevent a possible fire, do not block air intakes or ventilation grid in any manner.
• Do not use the heater in areas where gasoline, paint, or flammable liquids are used or stored.
• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may
cause fire, electric shock, or injury to persons.
• Avoid the use of an extension power cord because this may overheat and become a fire hazard. If an
extension cord must be used it should be a 13A extension cord.
• The appliance must be positioned so that the plug is accessible. If you choose to chase the wire into the wall
for cosmetic reasons and or to install the fire using a fuse spur connection then the manufacturer cannot be
held liable for any charges arising from future decorative or re-installation costs should the fire require to be
exchanged at a future date.
780455 ASHDOWN STOVE SUITE

ASSEMBLY INSTRUCTIONS.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 780455 and is the answer not in the manual?

Questions and answers

Summary of Contents for Next 780455

  • Page 1: Assembly Instructions

    780455 ASHDOWN STOVE SUITE ASSEMBLY INSTRUCTIONS. IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY. Tools Needed Helpline If you have any problems with this product or require any replacement fittings please contact Customer Services Tel: 0844 844 8999 Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to be faulty.
  • Page 2: Product Information

    • This heater should not be used in a dusty environment. • “Warning “in order to avoid over heating do not cover the heater. Electrical – Before plugging into the mains, ensure the following: • The appliance MUST be earthed. •...
  • Page 3 STEP ONE 1. Attach mantel 1 to hearth 2 with 4 x bolts (A) using a screwdriver to tighten. STEP TWO 1. Insert the chimmey 4 into the hole located at underside bottom of mantel as shown. NOTE: 1 person is required to hold it in position whilst another person actions step three.
  • Page 4 STEP FIVE 1.The fire is ready for use through controlling the switches. NOTE: The switches will look like the diagram as show. It is important to be aware that switches must be turned on in the correct sequenceas below: ‘A’ must be on prior to switching on ‘B’ to get cool wind.
  • Page 5: Troubleshooting

    STEP TWO 1. Release the log by unscrewing 1 × screw. STEP THREE 1. Slightly pull the log forward and lift it up, then you can see the bulb inside. STEP FOUR 1. Plug out the bulb and replace with a new one. Re-fit the log with the screw and close the door.
  • Page 6 The wiring in this mains lead is colored in accordance with the following code: European Fires (CE approved) EARTH: GREEN and YELLOW NEUTRAL: BLUE LIVE: BROWN Replacement fuse must conform to British Standards and be rated at 13A. Next Retail Ltd, Desford Road, Leicester, LE19 4AT...

Table of Contents