S-Register - Garnet System GTM-56KM6 User Manual

GTM-56KM6 User's Guide
P Select Pulse Dialing
Sn Dial automatically stored phone no.
W Waiting for the tone
, Delay in calling
L Re-call last phone no.
E0 Do not echo previous command line
*** E1 Echo previous command line
H0 On-Hook
H1 Off-Hook
L0 Lower-level Speaker sound
L1 Low-level Speaker sound
*** L2 Mid-level Speaker sound
L3 High-level Speaker sound
M0 Stop speaker operation
Operate speaker until carrier is detected after
*** M1
dialing during connection
M2 Operate speaker always on
M3 Operate speaker after dialing last digit
O0 Changed to on-line status
O1 Changed to on-line status through retrain
Select register value (r=Register No., n=value
Sr=n
to be stored)
Automatically enable or disable data
*** &K1
compression
*** &N0 Select transmission speed by remote modem
AT COMMAND AND S-REGISTER
15 Garnet systems