Advertisement
Advertisement
Table of Contents
Summary of Contents for BIO RAD DTE4027
- Page 1 User Manual DTE4027 REF DTE4027 RFID Reader Module February 2014...
- Page 2 DTE4027 RFID Reader Module Table of Contents INTRODUCTION ..........................6 General Description ........................6 SPECIFICATIONS ..........................6 Physical Specifications ....................... 6 2.1.1 Dimensions ......................... 6 2.1.2 Weight ..........................6 Technical Specifications ......................6 2.2.1 General Specifications......................6 SYSTEM DESCRIPTION ........................7 Electrical Interface ........................
- Page 3 DTE4027 RFID Reader Module Bio-Rad Laboratories 7, rue de Madrid 67300 Schiltigheim France CAUTION Please read through and familiarize yourself with the contents of the user manual. ABOUT THIS MANUAL: This manual is intended for design engineers and technicians. The following topics are included: •...
- Page 4 • Consult the dealer or an experienced radio/TV technician for help. This device DTE4027 complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 5 DTE4027 RFID Reader Module WARNING TO USERS IN THE CANADA / ATTENTION POUR LES UTILISATEURS AU CANADA This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause...
- Page 6 MODULE INTEGRATION SPECIAL WARNINGS FOR US & CANADA • The DTE4027 module is considered as component that will be operated in combination with the final equipment. Then, the final equipment (including power supply system) still needs to re-confirm that the whole system complies with both intentional and unintentional emission requirements.
-
Page 7: Introduction
1 INTRODUCTION 1.1 General Description The Bio-Rad DTE4027 module is a complete read and write solution for 13.56 MHz Mifare Classic cards (1k, 4k). It is designed to be integrated in an equipment in order to add RFID feature with low engineering and certification efforts. -
Page 8: System Description
DTE4027 RFID Reader Module 3 SYSTEM DESCRIPTION The hardware is a small PCB which has the following parts: • RFID antenna coil on the PCB • RFID chip • Slave PIC processor for interfacing between the UART commands and the RFID chip •... -
Page 9: Mechanical Drawing
DTE4027 RFID Reader Module 3.3 Mechanical Drawing 77 mm 56.5 mm 27.5 mm 27.5 mm 3.5 mm 3.0 mm Antenna Centre 1.6 mm 5.1 mm With its plastic enclosure: User Manual... -
Page 10: Installation Procedure
DTE4027 RFID Reader Module 4 INSTALLATION PROCEDURE 4.1 Installation Requirements In order to reduce unwanted emission in the spurious domain under the maximum regulatory limits, two ferrites must be added on the cable connecting the RFID board to the instrument at a distance of 70 mm maximum from the RFID board connector.
Need help?
Do you have a question about the DTE4027 and is the answer not in the manual?
Questions and answers