Subscribe to Our Youtube Channel
Related Manuals for Cookworks HM729WB
Summary of Contents for Cookworks HM729WB
- Page 1 Hand Mixer with Bowl Model No. HM729WB Care & Instruction Manual For household and indoor use only Please read these instructions before use and retain for future reference ISSUE-1 26/10/2017...
- Page 2 Electrical safety You should only plug the appliance into a 220V‐240V AC, 50Hz supply. Connecting it to other power sources may damage the appliance and will invalidate the guarantee. Switch off and unplug if unattended and before assembling, disassembling or cleaning.
- Page 3 Warning! This appliance is intended exclusively for use in domestic households. It is not suitable for commercial use. Only use with the parts provided. Never place hands or utensils inside the mixing bowl or near the mixing heads whilst the mixer is in use. Only use a scraper when the mixer is not in operation.
- Page 4 Fitting the mixing accessories 1. To fit the beaters insert the beaters into the sockets on the underside of the motor housing (figs 1 & 2) and push firmly. 2. To fit the dough hooks insert the dough hook with the washer into the larger socket (see below) on the underside of the motor housing (fig.
- Page 5 To use 1. Clean thoroughly before first use. 2. Place the ingredients to be mixed into the mixing bowl (or another suitable container if not using the stand) and place the bowl onto the stand. 3. Fully unwind the mixer cable and check that the speed control slider is in the off (0) position.
- Page 6 Notes: (continued) The mixing accessories can be used with a maximum of 500g flour / 375g water. Using recipes containing over 500g flour will damage the mixer. When making dough it may be necessary in the latter stages to hold the handle of the mixer to prevent the mixing heads lifting.
- Page 7 Plug / Wiring advice The wires in this mains lead are coloured in accordance with the following UK electrical code: BLUE = NEUTRAL BROWN = LIVE Non-rewireable plug This appliance may be fitted with a “non‐rewireable” plug. If you need to change the fuse in a “non‐rewireable” plug, the fuse cover must be refitted.
- Page 8 ISSUE-1 26/10/2017...
Need help?
Do you have a question about the HM729WB and is the answer not in the manual?
Questions and answers