1. Manuals
  2. Brands
  3. Matra Nortel Manuals
  4. Handhelds
  5. MC 2610
  6. User manual

Matra Nortel MC 2610 User Manual

Ccp v35/en
Hide thumbs
Table of Contents

Advertisement

Quick Links

CCP MC2 V35 EN LB
17/10/01
14:12
Page 1
CCP
MC 2610
V35/EN
User Guide
M C
2 6
1 0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MC 2610 and is the answer not in the manual?

Questions and answers

Summary of Contents for Matra Nortel MC 2610

  • Page 1 CCP MC2 V35 EN LB 17/10/01 14:12 Page 1 MC 2610 V35/EN User Guide...
  • Page 2 CCP MC2 V35 EN LB 17/10/01 14:12 Page 2 NOTICES TO BE READ BEFORE USE SAFETY • Do not use or start up the terminal in an environment exposed to explosion hazards or near explosive equipment. MNC disclaims all responsibility if the equipment is used in non- observance of such instructions, or of this manual in general.
  • Page 3 CCP MC2 V35 EN LB 17/10/01 14:12 Page 3 Contents Functions of the keys Display How to use the terminal How to place a call Receiving a call or a message Open Channel or Group Menu Scan Direct Menu Memory Menu Message Menu Extension Menu Terminal...
  • Page 4 + Call selector Microphone Direct Menu Transmit LED Controls the Keys absent from transmit light On LED the basic CCP version indicator (5) Aplha- MC 2610 numeric keypad (depending on model) MENU End (3) Flash priority Terminal Menu Memory Menu...
  • Page 5 CCP MC2 V35 EN LB 17/10/01 14:12 Page 5 Display Active call : Base Station Connected : direct mode power min. SMS message received : Direct mode power max. Forwarding : Telephone Received call : Independent digital repeater Received field strength External loudspeaker (BSC connected mode) Ring Tone active...
  • Page 6 CCP MC2 V35 EN LB 17/10/01 14:12 Page 6...

  • Page 7: Table Of Contents

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 7 How to use the terminal Starting the terminal Turning off the terminal Volume control Adjusting the volume of the ringing tones, tones and beeps Adjusting the voice volume Adjusting the external loudspeaker volume Entering a call reference Entering an address (individual call, multi-party call) Entering an open channel number (depending on the option)

  • Page 8: Starting The Terminal

    STARTING THE TERMINAL • Press the call selector. The terminal emits an information beep. On/Off button Call selector MC 2610 The message “ W W A A I I T T ” and the address of the terminal flash for a few seconds (terminal initialisation).

  • Page 9: Volume Control

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 9 How to use the terminal VOLUME CONTROL keys are used to adjust individually the level of the ringing tones, tones and beeps, the voice volume and that of the external loudspeaker if one is used with the CCP (optional). There are 8 levels, which are stored in the terminal when it is switched off.

  • Page 10: Entering A Call Reference

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 10 How to use the terminal ENTERING A CALL REFERENCE Entering an address (Individual call, multi-party call) Each terminal has an address. The address is a 9-figure number divided into 4 fields. For example: 1100 3 figures 1 figure...

  • Page 11: Procedure For Using The Alphanumeric Keypad

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 11 How to use the terminal PROCEDURE FOR USING THE ALPHANUMERIC KEYPAD The alphanumeric keypad is used to draft messages (of no more than 150 characters) for sending SMSs (see Message Menu chapter). Whether this function is available or not depends on the V35 software version installed.

  • Page 12: Using The Key

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 12 How to use the terminal USING THE While entering a character (depending on V35 software version) • pressing the key deletes the last character entered. While displaying a menu • one press returns to the next level up. While displaying an information message •...

  • Page 13: Using The Call Selector

    (99 calls). Turn the call selector to change the selected position. The position selected is displayed at the top right of the display. On/Off Button Call Selector MC 2610 Selector Position Displayed Changing the position of the call selector causes: • permanent exit from the current call.

  • Page 14: Audible Signals (Ringing Tones, Tones And Beeps)

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 14 How to use the terminal AUDIBLE SIGNALS (Ringing tones, tones and beeps) Depending on the context, the terminal emits audible signals in addition to the messages displayed. These signals are divided into the following categories: ringing tones, tones and beeps.
  • Page 15 CCP MC2 V35 EN LB 17/10/01 14:12 Page 15 How to place a call Placing a call Private calls (individual, operator, multi-party, telephone) Flash Priority Group communication (open channel or group, depending on the option) Direct mode communication IDR mode communication Emergency call or direct mode emergency call Talking Speaker identity (optional)

  • Page 16: Placing A Call

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 16 How to place a call PLACING A CALL Private calls (Individual, operator, multi-party, telephone) Individual or operator call 1. Enter the address of the called party or the operator. 0 0 0 0 0 0 0 0 2 2 0 0 1 1 0 0 0 0 2 2 0 0 1 1...

  • Page 17: Flash Priority

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 17 How to place a call Telephone call (PABX call) 1. Enter the PABX interface address. 2. Press . The terminal displays: 0 0 1 1 C C A A L L L L N N U U M M B B E E R R ? ? 3.

  • Page 18: Group Communication (Open Channel Or Group Depending On The Option)

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 18 How to place a call Group communication (Open channel or group depending on the option) 1. Press .The terminal displays either: 0 0 1 1 0 0 1 1 M M E E N N U U M M E E N N U U O O C C ( ( 3 3 ) ) G G R R O O U U P P ( ( 3 3 ) )

  • Page 19: Direct Mode Communication

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 19 How to place a call Direct mode communication Using the direct mode makes it possible to communicate directly with all parties within radio range and on the same channel. If the " N N E E T T W W O O R R K K M M O O N N I I T T O O R R I I N N G G "...

  • Page 20: Emergency Call Or Direct Mode Emergency Call

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 20 How to place a call Emergency call or direct mode emergency call Pressing and holding down sends an emergency call. Depending on the option, the emergency call results in the opening of an emergency open channel or an operator call back request.

  • Page 21: Talking

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 21 How to place a call TALKING 1. When the call is set up, press PUSH-TO-TALK to speak. Wait until the transmit indicator lights red before speaking. N.B.: the transmit LED can be disabled using the " "...

  • Page 22: Calling The Last Number Dialled

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 22 How to place a call CALLING THE LAST NUMBER DIALLED (Last number redial function) The terminal stores the last number dialled (except for emergency calls). The re-dial function allows you to re-call a number without having to re-dial it.
  • Page 23 CCP MC2 V35 EN LB 17/10/01 14:12 Page 23 Receiving a call or a message Presentation of a private call (individual, multi-party, telephone, operator) Special case where you are in group communication when a call comes in Presentation of a priority call Presentation of an emergency call Presentation of a direct mode emergency call Presentation of a general call (Broadcast call)

  • Page 24: Receiving A Call Or A Message

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 24 Receiving a call or a message PRESENTATION OF A PRIVATE CALL (Individual, multi-party, telephone, operator) A private call is presented when the terminal is on standby or in group communication. The calls are presented by a ringing tone accompanied by a message specifying the type of call.

  • Page 25: Special Case Where You Are In Group Communication When A Call Comes In

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 25 Receiving a call or a message SPECIAL CASE WHERE YOU ARE IN GROUP COMMUNICATION WHEN A CALL COMES IN During ringing phase, longer participate in the current group communication. If you refuse the call, you return to the group communication. If you accept the call, you momentarily leave the group communication for the time of the call.
  • Page 26 CCP MC2 V35 EN LB 17/10/01 14:12 Page 26 Receiving a call or a message PRESENTATION OF AN EMERGENCY CALL An emergency call is presented when the terminal is on standby, in private call or in group communication. An emergency ring informs you of the incoming emergency call and the terminal displays: 0 0 1 1 7 7 8 8 0 0 2 2 0 0 0 0 3 3 2 2 5 5...

  • Page 27: Presentation Of A Direct Mode Emergency Call

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 27 Receiving a call or a message PRESENTATION OF A DIRECT MODE EMERGENCY CALL A direct mode emergency call is presented when the terminal is on standby, in private call or group communication. An emergency ring informs you of the direct mode emergency call and the terminal displays: 0 0 1 1...

  • Page 28: Presentation Of A General Call (Broadcast Call)

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 28 Receiving a call or a message PRESENTATION OF A GENERAL CALL (Broadcast call) A general call is presented when the terminal is on standby, in a private communication or group communication. A ringing tone informs you of the incoming general call and the terminal displays: 0 0 1 1...

  • Page 29: Receiving A Message

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 29 Receiving a call or a message RECEIVING A MESSAGE A message (SMS, message sent to a data terminal (UDT)) can only be received when the terminal is on standby. The terminal emits a ringing tone and displays the following message for approximately 5 seconds: 0 0 1 1 R R E E C C E E I I V V I I N N G G...
  • Page 30 CCP MC2 V35 EN LB 17/10/01 14:12 Page 30...

  • Page 31: Ccp Mc2 V35 En

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 31 Open Channel or Group Menu Depending on the predefined option, terminals have access to either open channels or to groups. Also, terminals with the group option can operate either in Talkgroup mode or Group call mode, depending on their configuration.

  • Page 32: Ccp Mc2 V35 En

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 32 Open Channel or Group Menu Emergency sub-menu (common to all 3 variants) Structure of the sub-menu Listing the available emergency open channels Waiting for entry in an emergency open channel Closing an emergency open channel Options sub-menu Structure of the sub-menu ADDL.

  • Page 33: Open Channel Or Group Menu

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 33 Open Channel or Group Menu OPEN CHANNEL SUB-MENU An open channel is a pre-established communication over a given geographical coverage and associated with a set of terminals. It allows these terminals to communicate with one another by entering the pre-established communication opened by a base network operator or an authorised terminal.

  • Page 34: Listing The Available Open Channels

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 34 Open Channel or Group Menu Listing the available open channels This function is used to list all the open channels set up under the base station and available to the user. 1.

  • Page 35: Displaying The Visited Rn

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 35 Open Channel or Group Menu Displaying a visited BN The open channels are displayed spontaneously with 6 digits when the terminal is outside its home base network (BN). The number of the visited BN is displayed to the left of the number of the open channel.

  • Page 36: Opening An Open Channel

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 36 Open Channel or Group Menu Opening an open channel This function is only available to terminals authorised at customisation. If the terminal is not authorised, the function is not displayed. To open an open channel, the terminal must be registered with the BN corresponding to the open channel which is to be opened.

  • Page 37: Group Sub-Menu In Talkgroup Mode

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 37 Open Channel or Group Menu GROUP SUB-MENU IN TALKGROUP MODE A group is a set of terminals linked to a communication already set up by a base network operator. In Talkgroup mode, the terminal only participates in the selected group (amongst those it belongs to).

  • Page 38: Listing The Available Talkgroups

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 38 Open Channel or Group Menu Listing the available talkgroups This function is used to list all the talkgroups to which the terminal belongs. These talkgroups are distributed automatically by the network. Talkgroups which are not available under the registration station flash on the display.

  • Page 39: Talking

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 39 Open Channel or Group Menu Talking • Press Push-to-talk to speak in the talkgroup displayed. Following congestion, the Push-to-talk can be put on hold, in which case the terminal emits a continuous on-hold beep and displays the message "...

  • Page 40: Group Merging

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 40 Open Channel or Group Menu Group merging The selected talkgroup can be merged with other talkgroups into a multiple group. In this case, switching over to the multiple group is automatic. At the end of multiple group, return to the initial talkgroup is automatic.

  • Page 41: Group Sub-Menu In Group Call Mode

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 41 Open Channel or Group Menu GROUP SUB-MENU IN GROUP CALL MODE Structure of the sub-menu Group No. to CALL GROUP LIST a group to LIST the available groups to CALL the selected group Group No.

  • Page 42: Listing The Available Groups

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 42 Open Channel or Group Menu Listing the available groups This function is used to list all the groups to which the terminal belongs. These groups are distributed automatically by the network. Groups which are not available under the registration station flash on the display.

  • Page 43: Talking

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 43 Open Channel or Group Menu Talking • Press Push-to-talk to speak in the group displayed. The Push-to-talk may be refused if the radio channel is busy: the terminal then displays the message " N N E E T T W W O O R R K K O O V V E E R R L L O O A A D D "...

  • Page 44: Emergency Sub-Menu (Common To All 3 Variants)

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 44 Open Channel or Group Menu EMERGENCY SUB-MENU The Open channel or Group Menu has an Emergency sub-menu, whatever the terminal operating type. Structure of the sub-menu GROUP LIST to LIST the emergency open channels to ENTER the selected emergency open channel...

  • Page 45: Waiting For Entry In An Emergency Open Channel

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 45 Open Channel or Group Menu 4. Press to display the number (address) of the emergency terminal (press again to return to the list). The terminal displays: 0 0 1 1 L L I I S S T T 3 3 2 2 5 5 >...

  • Page 46: Options Sub-Menu

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 46 Open Channel or Group Menu OPTIONS SUB-MENU Structure of the sub-menu GROUP OPTIONS Group No. to DEFINE an ADDL. GRP extra group Group No. to DEFINE an WRITE extra group to ERASE the ERASE extra group Group No.

  • Page 47: Addl. Grp (Additional Group)

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 47 Open Channel or Group Menu ADDL. GRP (Additional group) This function is only available for terminals in Group call mode. The Additional group function is used for the manual addition of a group which is not distributed to the terminal by the network, to the list of available groups, and to receive all calls sent to that group.

  • Page 48: Def Grp (Default Group)

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 48 Open Channel or Group Menu DEF GRP (Default group) This function is only available for terminals in Group Call mode. G r o u p c a l l e d d e f a u l t function allows...

  • Page 49: Prfcial Com. (Preferential Communication)

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 49 Open Channel or Group Menu PRFCIAL COM. (Preferential communication) The Preferential communication function is used to favour the active group communication with regard to radio reception criteria. The preferential communication may be, depending on the project, an open channel, a talkgroup (Talkgroup mode), the default group called (Group call mode), the emergency open channel or a scan priority communication in priority mode.
  • Page 50 CCP MC2 V35 EN LB 17/10/01 14:12 Page 50...

  • Page 51: Ccp Mc2 V35 En

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 51 Scan The scan function Dialling a scan Dialling a 3-call scan Priority scan sequence Starting the scan Talking – Activating the priority open channel Listening to a non-priority open channel Skipping an active non-priority open channel (scan relaunch) Non-priority scan sequence Starting the scan Activating a call in the list...

  • Page 52: The Scan Function

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 52 Scan THE SCAN FUNCTION The scan function is used to listen to between 2 and 6 open channels or talkgroups in turn (depending on the option). The open channel scan can operate in priority mode or non- priority mode, depending on the configuration of the terminal.

  • Page 53: Dialling A Scan

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 53 Scan DIALLING A SCAN A scan can be dialled when the terminal is on standby or in group communication. The first call in the list can be selected from the " L L I I S S T T "...

  • Page 54: Priority Scan Sequence

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 54 Scan PRIORITY SCAN SEQUENCE Starting the scan Starting a scan is only possible under the following circumstances: • the terminal must be under priority open channel coverage, • the priority open channel must be available under the station, •...

  • Page 55: Listening To A Non-Priority Open Channel

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 55 Scan Listening to a non-priority open channel Listening to a non-priority active open channel is possible only when the priority open channel is not active. When a non-priority open channel is activated, the terminal listens to the open channel and displays, for example: 0 0 1 1 7 7 8 8 0 0 2 2 0 0 0 0 3 3 2 2 5 5...

  • Page 56: Non-Priority Scan Sequence

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 56 Scan NON-PRIORITY SCAN SEQUENCE Starting the scan If no call in the list is available, the scan cannot be started and S S C C A A N N the request is put on hold (" "...

  • Page 57: Talking - Default Push-To-Talk

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 57 Scan Talking - Default Push-to-talk The Push-to-talk key is associated by default with the first call in the list: the call displayed during the scan search phase. Pressing the Push-to- talk key will activate this call. The call a s s o c i a t e d w i t h P u s h - t o - t a l k can be changed when the scan is searching, by pressing : the new call associated...
  • Page 58 CCP MC2 V35 EN LB 17/10/01 14:12 Page 58...

  • Page 59: Ccp Mc2 V35 En

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 59 Direct Menu Structure of the Direct Menu DIR sub-menu Listing authorised channels in direct mode Entering a channel in direct mode IDR sub-menu Listing authorised channels in IDR mode Entering a channel in IDR mode Options sub-menu POWER (Transmit power) NT MONIT (Network monitoring)

  • Page 60: Direct Menu

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 60 Direct Menu STRUCTURE OF THE DIRECT MENU The Direct Menu provides access to functions relating to calls in BS disconnected mode (direct mode and IDR mode). The Direct Menu is divided into the following 3 sub-menus: •...

  • Page 61: Dir Sub-Menu

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 61 Direct Menu DIR SUB-MENU Listing authorised channels in direct mode This function is used to display authorised channels in direct mode. 1. Press . The terminal displays: 0 0 1 1 M M E E N N U U : : D D I I R R ( ( 1 1 5 5 ) ) The figure in brackets shows...

  • Page 62: Entering A Channel In Direct Mode

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 62 Direct Menu Entering a channel in direct mode You can enter a channel in direct mode either by listing the authorised channels, dialling the number of the channel or from the directory, when the terminal is on standby or in group communication.

  • Page 63: Idr Sub-Menu

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 63 Direct Menu IDR SUB-MENU Listing authorised channels in IDR mode This function is used to display authorised channels in IDR mode. 1. Press twice. The terminal displays: 0 0 1 1 M M E E N N U U : : I I D D R R ( ( 3 3 ) ) The figure in brackets shows...

  • Page 64: Entering A Channel In Idr Mode

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 64 Direct Menu Entering a channel in IDR mode You can enter a channel in IDR mode either by listing the authorised channels, dialling the number of the channel or from the directory, when the terminal is on standby or in group communication.

  • Page 65: Options Sub-Menu

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 65 Direct Menu OPTIONS SUB-MENU POWER (Transmit power) The terminal has 5 transmit power levels in direct mode. The function is only available when the terminal is in communication on a channel in direct mode and remains stored at the end of the communication.

  • Page 66: Nt Monit (Network Monitoring)

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 66 Direct Menu NT MONIT (Network Monitoring) The Network Monitoring function allows a terminal in direct mode to receive calls from the network (individual call, multi-party call, telephone call, general call, emergency call and data communication). A call can only be received from the network if the terminal is under network coverage.

  • Page 67: Ccp Mc2 V35 En

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 67 Memory Menu Structure of the Memory Menu Last number redial function Display and recall Clearing the last call Directory Displaying a call in the directory Sending a call from the directory Recording or changing a call in the directory Clearing a call...

  • Page 68: Memory Menu

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 68 Memory Menu STRUCTURE OF THE MEMORY MENU The Memory Menu provides access to the Last Number Redial function (calls back the last number dialled) and to display and recording of calls (from 1 to 99) in the directory. to DISPLAY the last number called Redial function...

  • Page 69: Last Number Redial Function

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 69 Memory Menu LAST NUMBER REDIAL FUNCTION The terminal stores the last number dialled regardless of the type of call (individual, multi-party, telephone, group call or scan, with the channel in direct or IDR mode). N.B.: It does not retain the priority of the call that was placed originally.

  • Page 70: Directory

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 70 Memory Menu DIRECTORY You can access any of the 99 positions in the directory by scrolling, by direct access or via the call selector. Access via the call selector only allows you to send the call corresponding to the selected position.

  • Page 71: Sending A Call From The Directory

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 71 Memory Menu Sending a call from the directory Sending a call 1. Select the position in the directory containing the call. 2. Press to send the call. Sending a private call with Flash priority 1.

  • Page 72: Recording Or Changing A Call In The Directory

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 72 Memory Menu Recording or changing a call in the directory 1. Select the corresponding position in the directory. 2. Press to confirm the choice of position. The terminal displays: 0 0 3 3 P P R R O O G G 3 3 : : W W R R I I T T E E ? ? 3.

  • Page 73: Ccp Mc2 V35 En

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 73 Message Menu Message Menu "SEND MESSAGE" Sub-menu Sub-menu structure Procedure for sending a message Selecting the messaging application Entering a message or selecting a status Selecting a recipient and/or a priority Sending the message "MESSAGE RCVD"...

  • Page 74: Message Menu

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 74 Message Menu MESSAGE MENU The Message Menu is used to: • send text messages (depending on the V35 software version: SMS (Short Message Services) or statuses to a fixed recipient or one of your choice (to one or more terminals, to an operator), •...

  • Page 75: Send Message" Sub-Menu

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 75 Message Menu "SEND MESSAGE" SUB-MENU The " S S E E N N D D M M E E S S S S A A G G E E " sub-menu can have up to 16 messaging applications, depending on the options defined.

  • Page 76: Procedure For Sending A Message

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 76 Message Menu Procedure for sending a message The procedure for sending a text message (depending on the V35 software version) or a status is as follows: • select the messaging application you wish to use, •...

  • Page 77: Selecting A Recipient And/Or A Priority

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 77 Message Menu Selecting a recipient and/or a priority Selecting a message recipient and/or priority is accessed by pressing .If the recipient and priority are imposed by the application selected, an error beep is emitted when is pressed.

  • Page 78: Sending The Message

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 78 Message Menu Selecting a recipient from the directory A message or a status can only be sent from the directory from a position which contains an individual call or the number of a group. If a status is sent from a position containing another type of call (multi- party call, scan, entry into direct mode or IDR mode), the terminal emits an error beep indicating that the message or status cannot be sent.

  • Page 79: Message Rcvd" Sub-Menu (Messages Received)

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 79 Message Menu "MESSAGE RCVD" SUB-MENU (Messages received) The terminal receives messages (text or status) in an in-tray. These messages are stored in chronological order of arrival. They can be consulted, kept or erased after being consulted. N.B.: A terminal can store up to 9 messages whose total length does not exceed 150 or 450 characters (depending on the software version) (either 9 statuses or 5 messages of 30 or 90 characters or 3 messages...

  • Page 80: Consulting Messages Received

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 80 Message Menu Consulting messages received 1. Press twice to select the " " sub-menu. The terminal displays: M M E E S S S S A A G G E E R R C C V V D D M M E E N N U U : : M M E E S S S S A A G G E E R R C C V V D D ( ( 6 6 ) ) The figure in brackets is the total number...

  • Page 81: Erasing A Message Received

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 81 Message Menu Erasing a message received 1. Display the message to be erased (see above). The terminal displays, for example: S S T T A A T T U U S S 0 0 4 4 : : x x x x x x x x x x x x 2.

  • Page 82: Calls Receivd" Sub-Menu (Calls Received)

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 82 Message Menu "CALLS RECEIVD" SUB-MENU (Calls received) The terminal stores the last 9 individual or multi-party calls received. Depending on the option, the calls stored are: either calls refused or not answered, or calls accepted (answered) and calls refused or not answered.

  • Page 83: Consulting Calls Received

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 83 Message Menu Consulting calls received 1. Press 3 times to select the " " sub-menu. The terminal displays: C C A A L L L L S S R R E E C C E E I I V V D D M M E E N N U U : : C C A A L L L L S S R R E E C C E E I I V V D D ( ( 6 6 ) ) The figure in brackets...

  • Page 84: Calling Back A Call Received

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 84 Message Menu Calling back a call received 1. Select the call to be called back (see above). 2. Press . The terminal displays: C C A A L L L L 1 1 C C A A L L L L B B A A C C K K 3.

  • Page 85: Other System Version

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 85 Message Menu OTHER SYSTEM VERSION If the terminal is registered in a Base Network of a software version previous to V35, the messaging functions are limited to storing calls received and sending and receiving statuses. The structure of the Message Menu is then the following: Structure of the Message Menu RCVD CALLS...

  • Page 86: Calls Received Memory

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 86 Message Menu Calls received memory Calls received (indidvidual, multi-party), refused or not answered, are stored in the calls received memory. The terminal then displays the following message: 0 0 1 1 R R C C V V D D C C A A L L L L S S The letter A is displayed when a call is stored in the calls received memory.

  • Page 87: Statuses

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 87 Message Menu STATUSES A status is a short message that is sent directly to a dispatcher position. It is a 2-digit code that can be associated with a reference when the terminal is customised. The terminal has 100 statuses in its memory. Sending a status 1.
  • Page 88 CCP MC2 V35 EN LB 17/10/01 14:12 Page 88...
  • Page 89 CCP MC2 V35 EN LB 17/10/01 14:12 Page 89 Extension Menu Structure of the Extension Menu Deactivating the terminal (optional) Transfer...
  • Page 90 CCP MC2 V35 EN LB 17/10/01 14:12 Page 90 Extension Menu STRUCTURE OF THE EXTENSION MENU to DEACTIVATE the terminal (2) SECURITY CLEARING Recipient No. to TRANSFER a CALL After it has been deactivated, the terminal becomes non-operational and must be returned to a maintenance centre to be made operational again. When you are in individual communication, by pressing you can access the transfer function directly.
  • Page 91 CCP MC2 V35 EN LB 17/10/01 14:12 Page 91 Extension Menu DEACTIVATING THE TERMINAL (Optional) The Terminal Deactivation function is used to permanently deactivate the terminal by deleting its main parameters (in particular terminal’ address). After it has been deactivated, the terminal becomes non-operational and must be returned to a maintenance centre to be made operational again.
  • Page 92 CCP MC2 V35 EN LB 17/10/01 14:12 Page 92...

  • Page 93: Ccp Mc2 V35 En

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 93 Terminal Menu Structure of the Terminal Menu Loudspeaker Light LEDs Silence Beeps Keypad Locking the keypad Unlocking the keypad Forwarding Displaying forwarding Activating/Cancelling forwarding Write/Changing forwarding Preferred base network Displaying the preferred BN Writing a preferred BN Changing a preferred BN Deleting a preferred BN...

  • Page 94: Structure Of The Terminal Menu

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 94 Terminal Menu STRUCTURE OF THE TERMINAL MENU to ACTIVATE/CANCEL MENU the LOUDSPEAKER to SWITCH OFF/ON the KEYBOARD and DISPLAY to ACTIVATE/DEACTIVATE the LEDs to ACTIVATE/CANCEL the SILENCE MODE to DELETE/ACTIVATE BEEPS to LOCK/UNLOCK the KEYPAD to DISPLAY...

  • Page 95: Loudspeaker

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 95 Terminal Menu LOUDSPEAKER The Loudspeaker function is used to activate or cancel the external loudspeaker. The loudspeaker volume is adjusted using the keys on the CCP. When the loudspeaker is activated, the volume is at the same level as when it was last activated.

  • Page 96: Silence

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 96 Terminal Menu SILENCE The Silence function is used to inhibit all sounds (signals and conversation) in the pear shape microphone. The external loudspeaker is inhibited when the silence mode is activated. 1.

  • Page 97: Keypad

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 97 Terminal Menu KEYPAD The Keypad function is used to temporarily lock the terminal keys. When the keypad is locked, only the , Push-to-talk and MENU volume control keys remain active. Locking the keypad 1.

  • Page 98: Forwarding

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 98 Terminal Menu FORWARDING The Forwarding function allows a terminal to direct all incoming calls (individual and multi-party) and messages to another terminal. The address of the terminal to which calls and messages are forwarded is stored in the terminal.

  • Page 99: Preferred Base Network

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 99 Terminal Menu PREFERRED BASE NETWORK The Preferred BN function allows a terminal to be registered preferentially in a base network other than the base network to which it belongs. If the terminal fails to register in the chosen base network, it registers in the base network where it is situated.

  • Page 100: Deleting A Preferred Bn

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 100 Terminal Menu Deleting a preferred BN 1. Press 8 times. MENU 2. Press . The terminal displays: 0 0 1 1 F F O O R R C C E E C C A A N N C C E E L L ? ? 3.

  • Page 101: Terminal Identity

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 101 Terminal Menu TERMINAL IDENTITY The Identity function is used to display the address of the terminal, its serial number, service class, hardware state and software version. 1. Press 10 times. The terminal displays " ".
  • Page 102 CCP MC2 V35 EN LB 17/10/01 14:12 Page 102...

  • Page 103: Ccp Mc2 V35 En

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 103 Procedure in the event of a problem The display indicates "LOSS OF STATION" An open channel or group has been lost The call has been cut off Other operating problems...

  • Page 104: The Display Indicates "Loss Of Station

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 104 Procedure in the event of a problem THE DISPLAY INDICATES "LOSS OF STATION" 1- You were on standby or engaged in a private communication The terminal displays: 0 0 1 1 0 0 1 1 then L L O O S S T T...

  • Page 105: An Open Channel Or Group Has Been Lost

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 105 Procedure in the event of a problem AN OPEN CHANNEL OR GROUP HAS BEEN LOST (Depending on the option) 1- the open channel or group number is flashing 1ST CASE 0 0 1 1 0 0 1 1 O O C C 1 1 5 5 G G R R 1 1 5 5...
  • Page 106 CCP MC2 V35 EN LB 17/10/01 14:12 Page 106 Procedure in the event of a problem 3RD CASE 0 0 1 1 0 0 1 1 O O C C 1 1 5 5 G G R R 1 1 5 5 and network reception is poor You are unable to communicate.

  • Page 107: The Call Has Been Cut Off

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 107 Procedure in the event of a problem THE CALL HAS BEEN CUT OFF The terminal displays: The operator called is unavailable. 0 0 1 1 N N O O T T I I F F I I E E D D The call has been registered.

  • Page 108: Other Operating Problems

    CCP MC2 V35 EN LB 17/10/01 14:12 Page 108 Procedure in the event of a problem OTHER OPERATING PROBLEMS The terminal displays: The number (of the called party or open channel) is 0 0 1 1 U U N N K K N N O O W W N N unknown to the network.
  • Page 109 CCP MC2 V35 EN LB 17/10/01 14:12 Page 109 Procedure in the event of a problem A configuration problem has been detected in 0 0 1 1 P P R R O O B B L L E E M M the terminal.
  • Page 110 CCP MC2 V35 EN LB 17/10/01 14:12 Page 110 Tips To reply to a call, press or Push-to-talk. To refuse a call, press The call refused is stored unless it is an emergency call. Last number redial function To redial the last number called: press , then To display a call stored in the directory: press and then enter the directory No.
  • Page 111 CCP MC2 V35 EN LB 17/10/01 14:12 Page 111 Tips To find out which open channels or groups are available: press , then twice to access the list. Scroll through the available open channels or groups by pressing To enter the open channel or group displayed: press displayed (general call or priority scan) indicates that it is not possible to talk.
  • Page 112 CCP MC2 V35 EN LB 17/10/01 14:12 Page 112 Definitions Anti-gossip The anti-gossip device cuts off transmission after 30 seconds (default value) Customisation The terminal is customised by the TPS (Terminal Programming Station). It consists in authorising or inhibiting access to certain functions available on the terminal.
  • Page 113 CCP MC2 V35 EN LB 17/10/01 14:12 Page 113 Definitions Open channel An open channel enables a group of terminals to communicate with each other "by entering" a pre-established communication (open). The open channel is established over a given geographical area. Preferred base network The default for the preferred base network (BN) is the home BN (the BN that appears in the terminal’s address) or the BN number programmed...
  • Page 114 CCP MC2 V35 EN LB 17/10/01 14:12 Page 114 Index direct mode emergency call 20, 27 address 10, 101 keypad locking 97 directory 70 adjustment (volume) 8, 9 keys (functions) 4, 12 display 5 alphanumeric (entry) 11 anti-gossip definition 112 language 101 arrow (key) 4 emergency call 20...
  • Page 115 CCP MC2 V35 EN LB 17/10/01 14:12 Page 115 Index listing open channels 34 send (send/answer key) 4, 12 opening an open channel 36 service class 101 waiting for entry 18 silence (mode) 96 open channel opening signal SMS 11, 74 speaker identity 21 open channel menu 31 station (base) 100...
  • Page 116 EN60335-1 and EN60335-29, EN300113-1/2 and recommendation 1999/519/CE (EMF). During installation, the correct procedures must be followed in order to maintain compliance with European requirements. MATRA NORTEL COMMUNICATIONS Rue Jean-Pierre Timbaud B.P. 26 78392 Bois d’Arcy Tél : (0)1 30 47 61 61 - Fax : (0)1 30 47 60 60...
  • Page 117 CCP MC2 V35 EN LB 17/10/01 14:12 Page 117...
  • Page 118 CCP MC2 V35 EN LB 17/10/01 14:12 Page 118 UG - PS8683BEA01...

Table of Contents