Advertisement
EN | 11
DVAS | Instruction Manual | Installation
Figure 5
The table will either show an OK result or a Needs
Configuring result. If the status of all settings is
reported as OK, there is no need to continue. To
continue with the automatic configuration, scroll to the
bottom of the Quick Config window. Check the check
box and click on the Quickstart configure for (x) DVR
button.
Figure 6
The Quick Config will adjust the settings required to
configure the disk array to work with 1 or 2 DVR's.
When the QuickConfig process is finished, you will be
instructed to reboot the system. At this point, manually
cycle the power switches.
Bosch Security Systems | 07 January 2004
Advertisement
