Pre-Programmed Templates; Programmable Templates - dB Broadcast MERlin Manual

DVB-T/T2 terrestrial receiver

Pre-Programmed Templates

There are 7 pre-programmed DVB-T2 templates which are the UK unified modes. In the UK,
Ofcom 7 is the required template.
To use a fixed template proceed as follows:
1. Select the required template from the drop down list.
2. Remember to enable the template alarm on the DVB-T2 Configuration page.
The template alarm is found in the T2 Configuration page. If the incoming DVB-T2 signal does
not match the T2 parameters, then an alarm is set.
If the DVB-T2 input signal does not match a pre-programmed template, each T2 parameter can
be checked using the DVB-T2 Monitoring page.

Programmable Templates

There are 7 user templates. Each element of the template can be programmed using the drop
down menus and enabled individually using tick boxes.
To create a user template, proceed as follows:
1. Select the nearest template from the preset Ofcom templates
 2013 dB Broadcast Ltd
MERlin
27
Using the Web Page
Version 1.2