Keep fingers , hair, and clothing away from belts, motors, wheels, and all moving parts. TURN ON/OFF THE LIGHT SPECIFICATION WARNING: WATCH OUT FOR WATER! ENJOYBOT is not water proof. Electronics, bearings, and other components can damaged, Water REPAIR AND MAINTENANCE damage ia not covered under the warranty. WARRANTY WARNING: DANGER OF ELECTRLC SHOCK! Do not open or tamper with electronics housings, which also voids the warranty.
Please keep this box in case you need to send the scooter for service or repairs. If you use another box, ENJOYBOT will not be responsible for any damage caused during shipping.
ASSEMBLE AND SET UP ASSEMBLE AND SET UP Unfolding the Scooter Handlebar Assemble 1.Press the folding bar with hands. 2.Stand up the handlebar stem. 3.Unfolding finished after hearing a click. Folding the Scooter Km/h 1.Hold the handlebar stem and 2.Push down the handlebar stem slightly. 3.Folded finished after hearing a click.
Your electric scooter may not have a fully charged battery; therefore you must charge the battery prior to use. Charge time: Approx. 2hrs for H3 or 5hrs for H3 Pro when the light turns green. Always charge the battery immediately when the capacity is below 2levels.
USAGE USAGE Starting the Scooter Stopping the Scooter Press and hold the power switch for 3seconds to ON/OFF, place both hands on the handlebars. Release the Throttle Control and apply the hand brake and foot brake until scooter comes to a complete stop. Place one foot on the deck plate, press the Throttle Control.
WHEELS AND BEARINGS If a defect arises and a valid claim is received within the warranty period, ENJOYBOT will repair the defect by using new Under normal circumstances and conditions, ENJOYBOT wheels and wheel bearings are maintenace free. Nonetheless, it is...
Page 9
ENJOYBOT Have a Question.Need Help? Web:www.enjoybot.com Email: help@enjoybot.com...
Need help?
Do you have a question about the H3 and is the answer not in the manual?
Questions and answers