Download Print this page

Rac -MV008 User Manual page 3

Twin-handle car polisher

Advertisement

Plug fitting
Your Car Polisher is supplied with a fitted plug, however if you should need to fit a new plug follow
the instruction below.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
Blue - Neutral Brown - Live
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured blue must be
connected to the terminal which is marked with N.
The wire which is coloured brown must be
connected to the terminal which is marked with
the letter L.
No connection is to be made to the earth
terminal of the plug.
If a 13 AMP (BS 1363) Plug is used, a 13 AMP
Fuse must be fitted, or if any other type of plug
is used a 13 AMP Fuse must be fitted, either in
the Plug or Adaptor, or on the Distribution
Board.
Note If a moulded plug is fitted and has to be removed take great care in disposing of the plug and
severed cable, it must be destroyed to prevent engaging into a socket.
If faults cannot be remedied, contact the Helpline on 020 83916767
Helpline@hilka.co.uk
GUARANTEE
This product is guaranteed for domestic use for a period of 12 months against faulty manufacture or materials. This
guarantee does not affect the statutory rights of the consumer. If in the event of any problem occurring please
contact our Helpline at the number above for advice. This product is not guaranteed for HIRE purpose.
Manufactured under licence and imported by Hilka Pro Imports.
1 ROEBUCK PLACE, ROEBUCK ROAD, CHESSINGTON, SURREY KT9 1EU
13 AMP
FUSE
BLUE
(NEUTRAL)
BROWN
N
(LIVE)
L
OUTER
SLEEVE
CABLE GRIP
Issue02 J.W.-03/2005
-6-

Advertisement

loading