Measuring Locations - Profibus PB-Q ONE User Manual

Connection to the PROFIBUS system

3.1.4 Measuring locations

In principle, the PB-Q
note that the use of repeaters and converters (OLM, data light barriers, wireless transmission) creates
separate physical segments that need to be evaluated individually.
A complete and in-depth analysis of the overall PROFIBUS system requires measurements to be performed
at the beginning and the end of each physical segment. If problems are detected that cannot immediately
be classified clearly, then at least one additional measurement should be performed in the middle.
ONE
PB-Q - User Manual
ONE
is able to perform measurements at any point in a PROFIBUS system. Please
11