Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Good Way Technology Co., Ltd. TD1110Z1
- Page 1 Z-Wave Window/Door Detector User’s Manual TD1110Z1...
- Page 2 ABOUT THIS MANUAL This manual is designed for use with the Z-Wave Window / Door Detector. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental,...
- Page 3 a. for FCC 15b devices This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
-
Page 4: Table Of Contents
Table of Contents 1. Introduction ......................1 Features ..........................2 Package Contents ......................3 LED Indicator ........................3 Z-Wave..........................4 Wireless Range........................5 2. Installation ......................6 Hardware Connection ....................... 6 Product Description......................8 Installation Requirements ....................14 Installing the Z-Wave Window / Door Detector ............. 14 3. -
Page 5: Introduction
1. Introduction This detector enables you to detect when your window/door is opened or closed. This detector allows you to assign lights or appliances to turn on and off when the attached window/door is being opened or closed. You can monitor any window/door status in your home through PC connectivity using a Z-wave USB dongle when you are away from home. -
Page 6: Features
Features Simple plug and play installation. Support device linking for triggering multiple devices to provide maximum security. Fully compatible with Z-wave enabled network, capable of communicating with any Z-wave certified device Package Contents Z-Wave Window / Door Detector 1.5 V AAA battery User’s Manual LED Indicator Color... -
Page 7: Wireless Range
Wireless Range The Z-Wave Lamp Dimmer Switch is made wireless by Z-Wave technology. Typical range for a wireless module is approximately 100 feet. When installing the module consider an open area with little obstruction for the best signal and performance. Avoiding the obstruction between the module and controller may make a negative effect on wireless performance and range. -
Page 8: Installation
2. Installation Hardware Connection Contact Magnet Cable Conduit Battery Lid Screw Program Button Battery Lid... -
Page 9: Product Description
Product Description Below is a description of button, light and plugs for the Z-Wave Window / Door Detector. The light will blink to indicate that the module has been entered “Program Mode” or when it is communicating wirelessly to the Z-Wave controller, such as Z-Wave Dongle. - Page 10 Cable Conduit This product provides extending switch function for user’s use. Please purchase a normal on/off switch first and in order to maximize the utility and use of this product, please take the following steps to install this additional function. 1.
- Page 11 3. Make sure the operation and status of LED indicator are working, please put the battery lid back and ready to use.
-
Page 12: Installation Requirements
Installation Requirements To install this product you must have Z-Wave enabled controller, such as Z-Wave Dongle, to make an association with Z-Wave Window / Door Detector. Installing the Z-Wave Window / Door Detector NOTE ======================================================= Before you install or use this Z-Wave Window / Door Detector, please install your Z-Wave controller first and make an inclusion for your Z-Wave device. - Page 13 To mount your Z-Wave device The Z-Wave Window/Door Detector can be mounted on any location that can be open or closed, such as closets, doors, windows, safes. The Z-Wave Window/Door Detector can be mounted in two ways: Double Sided Tapor Screws.
-
Page 14: Specifications
3. Specifications Item Description Protocol Z-Wave Sensor Type Magnet Power Mode Self Power Power Battery 1.5V AAA size * 2 Low battery indicator : Battery indicator shows when the battery voltage falls below at normal position LED Indicator Red color : Door/Window open status (Dual color) Green color : Low battery status. -
Page 15: Regulatory Compliance
4. Regulatory Compliance FCC Conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation WEEE Information For EU (European Union) member users:...
Need help?
Do you have a question about the TD1110Z1 and is the answer not in the manual?
Questions and answers