1. Manuals
  2. Brands
  3. American Innovations Manuals
  4. Handhelds
  5. Allegro MX
  6. User manual

American Innovations Allegro MX User Manual

Field data pc
Hide thumbs Also See for Allegro MX:
Table of Contents

Advertisement

Quick Links

Download this manual
Allegro MX v5.2 User Guide
Allegro v 7.0
User Guide
Proven compliance solutions. 
Proven compliance solutions.
Relentless service.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Allegro MX and is the answer not in the manual?

Questions and answers

Related Manuals for American Innovations Allegro MX

Summary of Contents for American Innovations Allegro MX

  • Page 1 Allegro MX v5.2 User Guide Allegro v 7.0 User Guide Proven compliance solutions.  Proven compliance solutions. Relentless service.
  • Page 2 Reproduction in any manner whatsoever without the written permission of American Innovations is strictly forbidden. The American Innovations logo and icon and Allegro MX Field Data PC are trademarks of American Innovations, Ltd. Juniper Systems, Allegro Field PC, and the company logo are registered trademarks of Juniper Systems, Inc.

  • Page 3: Table Of Contents

    Contents Chapter 1 Getting Started ..........1 Equipment List .
  • Page 4 Allegro MX User Guide Chapter 3 Close Interval Survey (CeCi) ........29 Quick Start.
  • Page 5 Allegro MX User Guide Add Indication Information............53 Add test point information .
  • Page 6 Allegro MX User Guide Export Control Classification Number ...107 Software License ......107...

  • Page 7: Getting Started

    Getting Started This guide explains how to set up and use American Innovations’ software installed on the Allegro MX Field . This chapter includes the following topics: ® • Equipment List • Preparing the Allegro for Use (page 2) •...

  • Page 8: Preparing The Allegro For Use

    Allegro MX User Guide Preparing the Allegro for Use When you first receive the Allegro from AI, perform the following tasks to prepare the device for service: • Install the Battery Pack (page 2) • Set Display Properties for a Monochrome Display (page 4) •...
  • Page 9 Allegro MX User Guide Push the battery door closed until slide latches click into place. If slide latches are not securely in place, the unit is no longer water tight. Plug the battery charger into a wall outlet, then the Allegro (Figure 1-3). The Power window (Figure 1-4) automatically displays after applying power.

  • Page 10: Set Display Properties For A Monochrome Display

    Allegro MX User Guide Set Display Properties for a Monochrome Display If the Allegro includes a monochrome display, complete the following steps to set display properties: Tap Start > Settings > Today icon to display the Today Settings window. Figure 1-5. Today In the Appearance tab, select High Contrast in Select a theme for your device.

  • Page 11: Set Regional Settings, Time Zone, And Date/Time

    Allegro MX User Guide Set Regional Settings, Time Zone, and Date/Time Regional settings specify the style that date/time, numbers, and currency are displayed. After selecting a display style, set up the Allegro with your preferred time zone, date, and time.

  • Page 12: Install Windows Mobile Device Center Or Activesync

    Allegro MX User Guide Tap OK to apply settings. Tap Yes to save settings and close the window. Tap the Close icon (X) to return to the previous screen. Install Windows Mobile Device Center or ActiveSync The Allegro communicates with a computer using either Windows Mobile Device Center (for Windows 7 and Vista) or Microsoft ActiveSync (for Windows XP or 2000).

  • Page 13: Windows Xp/2000: Install Activesync

    Allegro MX User Guide Figure 1-8. Windows Mobile Device Center Windows XP/2000: Install ActiveSync If your computer is running Windows XP or Windows 2000, complete the following steps: Insert the Getting Started CD in the CD drive of your computer. The CD is included with the Allegro.
  • Page 14 Allegro MX User Guide Figure 1-9. ActiveSync Synchronization Setup Wizard A successful sync connection occurs when the following ActiveSync window displays (Figure 1-10). Figure 1-10. ActiveSync Connected If a successful sync connection does not occur and you also use a VPN (virtual private network) software to establish a remote connection with a private network: (1) Disable or disconnect the VPN software.

  • Page 15: Transfer Utility Files To Pcs

    Allegro MX User Guide Transfer Utility Files to PCS If you use Pipeline Compliance System (PCS) with the Allegro, complete the following steps to transfer two utility files from the Allegro installation CD to the PCS executable directory on your computer. The utility files are labeled wToCmd.exe and CeFileXer.exe on the Allegro installation CD.

  • Page 16: Overview Of The Allegro Hardware

    Allegro MX User Guide Click Yes or Move and Replace to update existing files when Windows displays the Move File message. Overview of the Allegro Hardware The Allegro includes a connector panel, touchscreen display, keypad, and function keys (Figure 1-12).

  • Page 17: Connector Panel

    Allegro MX User Guide Connector Panel The connector panel is located at the top of the Allegro (Figure 1-13). It supports connections for items in the list below. Figure 1-13. Allegro Connector Panel The connector panel supports the following connections: •...

  • Page 18: Chainer/Stick Adapter Switch

    Allegro MX User Guide Chainer/Stick Adapter Switch A hardware switch inside the Allegro must be set before taking survey readings. Use the procedure below to set the switch in Stick Adapter mode if using a data cane to take survey readings. If using a wire counter instead, set the switch in Chainer mode.

  • Page 19: Overview Of Ai Allegro Software

    Allegro MX User Guide Overview of AI Allegro Software The Allegro ships from American Innovations with the following AI Allegro software factory-installed. AI Allegro software version 7.0 is compatible with PCS Axis as well as all version 6 and 7 PCS software.

  • Page 20: Realign The Touchscreen Display

    Allegro MX User Guide The Allegro includes a high-contrast, pressure-sensitive display with an adjustable backlight. When working in harsh conditions, such as a rainstorm or in high brush, pressing the BLUE shift and TS buttons toggles the touchscreen on or off.
  • Page 21 Allegro MX User Guide Figure 1-18. Allegro Keypad Table 1-1 provides a list of global shortcut keys that can be used on the Allegro keypad to run the associated command. Table 1-1. Global Shortcut Keys Command Shortcut Keys Description Toggle Caps <Blue><CapLk>...

  • Page 22: Function Keys

    Function Keys Function keys F1 through F5 are pre-assigned on the Allegro MX. The function keys are assigned with a Key Redirect file, which is installed on the Allegro before it is shipped. If the Key Redirect file is deleted from the Allegro Startup folder, F1 through F5 can then be set up to start any AI application.

  • Page 23: Windows Mobile Icons

    Allegro MX User Guide Click the drop-down arrow in Assign a program and select an AI software from the list. Repeat steps 3 and as needed. When you finish, click OK and then the Close icon (X) to return to the Start screen.
  • Page 24 Allegro MX User Guide Table 1-2. Windows Mobile Icon Descriptions (Continued) Icon / Text Description Speaker tap icon to display the Volume window and adjust the volume or turn the sound on or off. Alarm status icon in the Start bar indicating an alarm is set. If the icon displays in the desktop, it indicates an alarm is set for the current date.

  • Page 25: Al Allegro Documentation

    Allegro MX User Guide Al Allegro Documentation Included in the installation of the Allegro MX software is a PDF copy of this document and the software release notes. Use Adobe Reader on a laptop or desktop computer to view or print the files.

  • Page 26: Digital Voltmeter (Aidvm)

    Digital Voltmeter (AiDvm) AiDvm measures voltage, current, and resistance as a fully functional digital voltmeter (DVM) and as an integrated DVM to complement the following AI software: CeCi (close interval), DCVG (direct current voltage gradient), and Periodic Survey (annual/periodic survey). You can view measurements either in the main window of AiDvm or as a waveform graph.

  • Page 27: Quick Start

    Allegro MX User Guide Quick Start This section provides quick start procedures for setting up and using AiDvm. As a user you will perform the following actions: • Connect Test Leads to the Allegro • Set Test Function, Voltage Range, and Sample Rate (page 22) •...

  • Page 28: Set Test Function, Voltage Range, And Sample Rate

    Allegro MX User Guide Tap Start > AiDvm to display the main AiDvm window. Figure 2-2. AiDvm Main Window Set Test Function, Voltage Range, and Sample Rate Choose a test function by tapping Vdc, Vac, DC Amp, AC Amp, or AC mA.

  • Page 29: Set Gps Properties

    Allegro MX User Guide Set GPS Properties Tap Options in the main DVM window and then tap the GPS tab. If using the Allegro GPS internal module (optional add-on), verify Comm Port is COM3 (internal) and Baudrate is 9600. The option Read PPS from Internal GPS is unavailable for selection when using the Allegro internal GPS module.

  • Page 30: Set Data Logger Properties

    Allegro MX User Guide Set Data Logger Properties Tap Options in the main DVM window and then the Data Logger tab. Tap Enable logging. Set a time interval by tapping the drop-down arrow in the first Update interval field and selecting a value (1-50).

  • Page 31: Dvm Graph Overview

    Allegro MX User Guide DVM Graph Overview AiDvm displays the on/off interruption cycle in real-time as a waveform graph in addition to the digital display in the main DVM window. When using AiDvm during an on/off survey, tap Graph to view a waveform graph of the interruption cycle (Figure 2-3).

  • Page 32: Data Logger Overview

    Allegro MX User Guide Other indicators that may appear in the status line include those in the following list: • GPS (n): indicates GPS and the number of satellites in view • HiLo: indicates high/low readings • GPS (n HiLo): indicates GPS mode is selected but HiLo is used because the GPS signal is unavailable.

  • Page 33: Shortcut Keys

    Allegro MX User Guide Shortcut Keys Shortcut keys are an alternate method for using certain commands in AiDvm instead of menu commands. Use the Allegro keypad to run any of the commands identified in the following table (Table 2-1). Table 2-1. AiDvm Shortcut Keys...
  • Page 34 Allegro MX User Guide Table 2-1. AiDvm Shortcut Keys Command Shortcut Keys Description Save Enter Open Graph Remarks < > < > < > When viewing the DVM graph: Window and Add Data • Press <Tab> to move cursor to <Save>...

  • Page 35: Close Interval Survey (Ceci)

    Close Interval Survey (CeCi) CeCi records pipeline potential readings for close interval (CI) surveys. The software collects survey readings from a data cane or wire counter connected to the Allegro. CeCi measures voltage using the digital voltmeter card inside the Allegro. This chapter includes the following topics: •...

  • Page 36: Connect Test Leads To The Allegro

    Allegro MX User Guide BEFORE MAKING ANY VOLTAGE MEASUREMENT GREATER THAN 42 VOLTS AC OR DC: ARNING Disconnect any cable from the Remote Trigger input and replace the rubber cap before making voltage measurements using the red and black banana jacks.
  • Page 37 Allegro MX User Guide For Flagged survey using both data canes as triggers, use a Y-connector to plug each data cane’s 3- pin connector into the Remote Trigger connection on the Allegro connector panel (Figure 3-2). Figure 3-2. Allegro Connected to Data Canes as Two Triggers If using only one data cane as a trigger, plug one connector to the Remote Trigger connection on the Allegro (Figure 3-3).
  • Page 38 Allegro MX User Guide If using a survey tray with data canes, connect the survey tray’s 3-pin connector into the Remote Trigger connection on the Allegro. Connect the data canes’ 3-pin connectors to the survey tray junction box (Figure 3-4).

  • Page 39: Set Survey Properties

    Allegro MX User Guide Tap Start > AI > CeCi to display the main CeCi window (Figure 3-6). Figure 3-6. CeCi Main Window Set Survey Properties Tap File > Properties to display the Survey tab. Provide information in the following fields of the Survey tab: –...

  • Page 40: Set Survey Type And Mode

    Allegro MX User Guide – Tech: Enter the surveyor’s name in this optional field. If you plan to transfer the survey file to PCS, the surveyor’s name populates the Surveyor field in the Indirect Survey Manager (ISM) module. – Run: Enter a unique survey name in this optional field. If transferring the survey file to PCS, data in this field creates a new CI survey folder in ISM.

  • Page 41: Set Fixed Increment Mode Properties

    Allegro MX User Guide If using Flagged mode and you want to monitor the number of reads per flag, tap Monitor record count per flag and then click the drop-down arrow in the Warn at above average field and select a percentage value.

  • Page 42: Set Gps Properties

    Allegro MX User Guide If you are taking an interrupted survey using GPS synchronized current interrupters, complete the following steps: Tap the drop-down arrow in the Survey Type field and select On/Off GPS Sync or On/off GPS Real-time. On/Off GPS Sync works best for short cycle surveys when the on and off interval is 1 second or less.

  • Page 43: Save Survey File

    Allegro MX User Guide If you want the Allegro to synchronize with current interrupters using the satellite PPS signal (pulse-per-signal), tap Read PPS from Internal GPS. Tap Ok to save changes and return to the survey file. Save Survey File Tap the Save icon or tap File >...

  • Page 44: Set Audio And Double-Click Properties

    Allegro MX User Guide Set Audio and Double-click Properties Tap the Misc tab and select Beep on every Reading if you want the Allegro to beep each time a reading is taken. If you want the Allegro to beep when the voltage is more positive than the warning value you specify, tap Beep for voltages less negative than this value, and enter a warning value in the Voltage level field.

  • Page 45: Set Color Properties

    Allegro MX User Guide Set Color Properties Tap the Colors tab and select Enable color. Select an option in the list and then a color in the color grid. Repeat this step for each item in the list you want to assign a color.

  • Page 46: Add Test Point Information

    Allegro MX User Guide Add Test Point Information Select a survey record and then tap View > Test Point Info. Double-tap a test point and enter required values when prompted. Tap OK to enter the information in the survey record and return to the survey file.

  • Page 47: Export A Survey File

    Allegro MX User Guide Export a Survey File You can export CeCi survey files as a dBase file (.dbf) or comma separated file (.csv) for use with other software applications, such as Microsoft Excel. To export a survey file, follow these steps: Tap File >...
  • Page 48 Allegro MX User Guide When the Mark Native dialog box opens, click the check box for any Native Data survey files and then click OK to continue the transfer. The Field Computer Receive Status window opens showing the status of the file transfer. Refer to online help in PCS Axis for information about viewing and managing survey data in ISM.

  • Page 49: Survey File Features

    Allegro MX User Guide Survey File Features The following example (Figure 3-8) shows the type of information that displays in a survey file. Figure 3-8. CeCi Survey File Features Close Interval Survey (CeCi)

  • Page 50: Shortcut Keys

    Allegro MX User Guide Shortcut Keys Shortcut keys listed in the following table (Table 3-1) are an alternate method for using certain commands in CeCi. Use the Allegro keypad to run any of the following commands. Table 3-1. CeCi Shortcut Keys...
  • Page 51 Allegro MX User Guide Table 3-1. CeCi Shortcut Keys (Continued) Command Shortcut Keys Description Navigate GPS Tab Performs the following functions in the GPS tab of Options: • < > Press <C> to enable or disable Clear GPS Location After.

  • Page 52: Dc Voltage Gradient (Dcvg)

    DC Voltage Gradient (DCVG) DCVG locates indications of pipeline coating defects. The software records the voltage gradient and GPS location for further review and analysis later. DCVG collects data from a data cane connected to the Allegro. This chapter includes the following topics: •...

  • Page 53: Connect Data Canes To Allegro

    Allegro MX User Guide BEFORE MAKING ANY VOLTAGE MEASUREMENT GREATER THAN 42 VOLTS AC OR DC: ARNING Disconnect any cable from the Remote Trigger input and replace the rubber cap before making voltage measurements using the red and black banana jacks.

  • Page 54: Set Survey Properties

    Allegro MX User Guide Set Survey Properties Tap File > Properties to display the Survey tab. Provide information in the following fields of the Survey tab: – Segment: Enter the name of the ROW (right-of-way) in this required field. You can enter up to 100 characters.

  • Page 55: Set Survey Mode

    Allegro MX User Guide – Date: Enter a date or use the one automatically entered by DCVG. Set Survey Mode Tap the Modes tab. Tap the drop-down arrow in the Mode field and select either Flagged or Fixed increment. Depending on the survey mode selected earlier, continue with either Set Flagged Mode Properties or Set Fixed Increment Mode Properties.

  • Page 56: Set Dcvg Properties

    Allegro MX User Guide time, OFF time, On Setup, Off Delay, and Cycle begins with fields. This survey type requires that you also set up properties in the GPS tab. Set DCVG Properties Tap the DCVG tab. Measure and enter the on reading taken at the beginning and end of the survey in the P/S On, Begin and End fields.

  • Page 57: Save Survey File

    Allegro MX User Guide Tap OK to close Survey properties. Save Survey File Tap either the save icon or File > Save. The Save As window displays when working with a new survey file that has not previously been saved. Enter a name for the new survey file in the Name field and then tap Record Inspection Readings Press Enter on the Allegro keypad or single-click the data cane to record readings in the survey file.

  • Page 58: Set Optional Audio And Double-Click Properties

    Allegro MX User Guide Set Optional Audio and Double-click Properties Tap the Misc tab if it is not visible (View > Options > Misc tab). If you want the Allegro to beep when the voltage is above an absolute value you specify, tap Beep for voltages above this absolute value, and enter a warning value in the Voltage level field.

  • Page 59: Set Optional Color Properties

    Allegro MX User Guide Set Optional Color Properties Tap the Colors tab (View > Options > Colors tab). Tap Enable color. Select an option in the list and then a color in the color grid. Repeat this step for each item in the list you want to assign a color.

  • Page 60: Add Test Point Information

    Allegro MX User Guide Signal Strength: Enter the signal strength of the indication. DCVG automatically calculates and enters values in the Total IR and % IR fields. Signal strength is the pipe-to-soil On reading minus the pipe-to-soil Off reading (P/S On –...

  • Page 61: Export A Survey File

    Allegro MX User Guide The Site Locator window shows bearing and distance to a target location. Bearing is blank when the Allegro is not receiving a valid GPS fix. The message Out of Range displays when the following conditions occur: •...

  • Page 62: Survey File Features

    Allegro MX User Guide Survey File Features The following example shows the type of information that displays in a DCVG survey file. Figure 4-4. DCVG Survey File Features DC Voltage Gradient (DCVG)

  • Page 63: Shortcut Keys

    Allegro MX User Guide Shortcut Keys Shortcut keys listed in Table 4-1 are an alternate method for using certain commands in DCVG. Use the Allegro keypad to run any of the following commands. Table 4-1. DCVG Shortcut Keys Command Shortcut Keys Description <Ctrl>...

  • Page 64: Annual/Periodic Survey

    Annual/Periodic Survey Periodic Survey (PS) measures voltage readings for annual and periodic surveys. The software collects survey readings from test leads connected to the Allegro. PS is used in conjunction with AI’s PCS software. Facility and inspection fields are established in PCS, and then transferred to the Allegro. After completing a survey, data is then transferred from the Allegro back to PCS.

  • Page 65: Connect Test Leads To Allegro

    Allegro MX User Guide • Change Font Properties (page 65) • Save Survey File (page 65) • Record Inspection Readings (page 65) The PS application handles up to 1,000 facilities. BEFORE MAKING ANY VOLTAGE MEASUREMENT GREATER THAN 42 VOLTS AC OR DC:...

  • Page 66: Set On/Off Survey Method

    Allegro MX User Guide Tap Start > PeriodicSurvey to start the software. Figure 5-2. PS Survey Tap File > Open. Select a survey file in the Open window and then tap OK. Set On/Off Survey Method If you plan to take on/off potential readings, tap View > Options to display the On/Off tab.

  • Page 67: Set Gps Properties

    Allegro MX User Guide Set GPS Properties If you want to include GPS coordinates with readings, tap Edit > GPS > Turn ON. Set GPS Display Format and enable Show Bearing-distance to site using the following these steps: Tap View > Options > GPS tab.

  • Page 68: Rearrange The Sites

    Allegro MX User Guide Tap OK to close the window and return to the survey file. Tap the drop-down arrow in the ROW Code field. Select a ROW code or select Other and then enter a new ROW code. If you selected Other, complete the following steps to prevent entering an incorrect ROW code: Highlight an existing ROW code by pressing <Shift>...

  • Page 69: Locate A Specific Survey Record

    Allegro MX User Guide Tap OK to return to Site List. The sites are rearranged based on the sort order and show settings defined in Options. Tap OK or Cancel to return to the survey file. Locate a Specific Survey Record Survey records are shown in the order determined by the sort order selected in the Site List Options.

  • Page 70: Select A Value For A Field With A Multi-Select Picklist

    Allegro MX User Guide Jump to a Record The Site List shows all sites available in the current file and allows you to quickly jump to a specific survey record. Tap View > Site List to see all available sites in the current file. Scroll up or down in the list if needed to find the survey record you want to view.

  • Page 71: Change Font Properties

    Allegro MX User Guide Figure 5-5. Multiple Selection Field Change Font Properties Tap View > Options > Fonts. Tap the drop-down arrow in the Item field and select Site List, Edit caption, or Edit field. Site List is a list of templates for adding a new site in the survey file (View > Site List). Edit caption refers to field names, and Edit field refers to data entered in fields.

  • Page 72: Timed Readings

    Allegro MX User Guide Timed Readings When the survey is set up in PCS with Allegro prompts for the following fields, these same fields are available in PS for timed readings: Min P/S, Max P/S, Average P/S, and P/S Sample Time.

  • Page 73: Set Auto-Backup Properties

    Allegro MX User Guide Set Auto-backup Properties PS provides an Auto-backup option that automatically saves the survey file at regular intervals. To set Auto- backup properties, follow these steps: Tap View > Options > Misc tab. Tap Enable Auto-backup and select a time interval in the Interval (minutes) field.

  • Page 74: Copy A Ps Survey To A Computer

    Allegro MX User Guide Click OK when the message Receive Allegro Data displays stating the process is complete. Copy a PS Survey to a Computer Complete the following steps to copy one or more PS survey files to a computer: Connect the provided USB cable to your computer and the Allegro.

  • Page 75: Ps Survey Features

    Allegro MX User Guide PS Survey Features A PS survey includes three main areas of information as shown in Figure 5-7. Figure 5-7. PS Survey Features Annual/Periodic Survey...

  • Page 76: Shortcut Keys

    Allegro MX User Guide Shortcut Keys Shortcut keys listed in Table 5-1 are an alternate method for using certain commands in PS. Use the Allegro keypad to run any of the following commands. Table 5-1. PS Shortcut Keys Command Shortcut Keys...
  • Page 77 Allegro MX User Guide Table 5-1. PS Shortcut Keys (Continued) Command Shortcut Keys Description Navigate Information <Alt> <U> Moves cursor between information and Reading Fields and reading fields. Navigate any Window <Tab> • Press < > to move cursor or Tab from one field to another.
  • Page 78 Interrupted On/Off Settings This appendix provides recommendations for on/off settings in an interrupted survey set up in AiDvm, CeCi, or Periodic Survey. When a survey file is set up in On/Off GPS Sync or On/Off GPS Real-time mode, AI recommends the survey file also be set up with On/Off High/Low settings.
  • Page 79 Allegro MX User Guide Table A-1. Suggested On/Off Settings (Continued) 0.7 on 200 mSec On Setup Takes reading 200 mSec before the cycle. 0.3 off 150 mSec Off Delay Takes reading 150 mSec into the cycle. 0.8 on 200 mSec On Setup Takes reading 200 mSec before the cycle.
  • Page 80 FAQs This appendix provides answers to frequently asked questions (FAQs) about the Allegro Field PC and AI Allegro software. If you have a question not covered in this chapter, contact Technical Services at allegrotechservices@aiworldwide.com. How do I determine which version of software is installed on the Allegro? For Allegro software versions 5.1 and later, the software version is shown on the title bar for each AI software application.
  • Page 81 How much storage space is on the Allegro? The Allegro MX is available with different sizes of internal SD memory cards, up to 32GB in size. The Allegro MX also supports a USB flash drive. Plug the USB flash drive in the USB port if you want to transfer files to and from the Allegro.
  • Page 82 Allegro MX User Guide BEFORE MAKING ANY VOLTAGE MEASUREMENT GREATER THAN 42 VOLTS AC OR DC: ARNING Disconnect any cable from the input and replace the rubber cap before making voltage Remote Trigger measurements using the red and black banana jacks.
  • Page 83 Allegro MX User Guide What is the best power-saving method for the Allegro? The following power options are available with the Allegro: • Press the On/Off key on the Allegro keypad to place the Allegro in suspend mode. Suspend Mode: Use this power option during the majority of day to day operation.
  • Page 84 Allegro MX User Guide How do I enlarge the font size or change the touchscreen brightness and contrast settings? To increase or decrease the font size > tab > > tab. Settings System Screen Text Size Move the slider to increase or decrease text size. To change text size and font in a PS survey file tap >...
  • Page 85 See Appendix C for more information. I programmed Allegro MX function keys to open AI software, now they do not work. Delete the Key Redirect shortcut in the Allegro Startup folder to restore functionality to F1 through F5.
  • Page 86 Allegro MX User Guide How can I verify interruption or make timing adjustments to ensure the Allegro is capturing the correct Structure P/S and Structure IRF at the correct time? Start AiDVM to complete the following steps: > tab >...
  • Page 87 Allegro MX User Guide Why are GPS coordinates not recording in my Periodic Survey file? Verify the cursor is in a reading field in the bottom pane of the survey file. Tapping a reading field places the cursor in the field.
  • Page 88 Allegro MX User Guide How do I include Remarks and GPS coordinates in a CeCi survey file when using Skip/ Lock/Normal mode? The following procedure applies to a CeCi survey set up in Fixed Increment mode. If you want to view the center line (CL) in a skipped section, verify the survey file is also set up with the option Retain Skipped records in Skip Mode (View >...
  • Page 89 Allegro MX User Guide to open the Remarks window (Figure B-7). Select and then double-tap the remark to Remark insert it in the survey record and close the window. Figure B-7. Remarks Window Press to move the cursor to the P/S field.
  • Page 90 Allegro MX User Guide Press < > < > to toggle from SKIP to normal mode. Move the cursor to the Remarks field and Ctrl add another remark. Figure B-10. Remarks Field Press and then the to move to the next SN and take a reading.

  • Page 91: Gps Status

    Utility Software This appendix explains how to set up and use the following utility software: • GPS Status • GPS Config (page 90) • GPS Pod Setup (page 91) • Key Redirect (page 93) • Bluetooth COM Setup Utility (page 94) GPS Status Use GPS Status (Figure C-1) to perform any of the following tasks: •...
  • Page 92 Allegro MX User Guide To start GPS Status, tap Start > GpsStatus to display the Gps Status window (Figure C-1). See Table C-1 for additional information. If the Allegro is unable to open the COM port, the message Unable to open GPS port COM3 (-2,317) displays.
  • Page 93 Allegro MX User Guide Table C-1. GPS Status Field Descriptions (Continued) Field Description GPS status Status line may include any of the following messages: • Receiving GPS • Initializing • Waiting Information about the serial connection displays in parentheses during...
  • Page 94 Allegro MX User Guide Table C-1. GPS Status Field Descriptions (Continued) Field Description GPS time GPS time displays when a GPS time signal is received and the Offset option is disabled. Updates display every second when GPS time is available. GPS time...

  • Page 95: Gps Status Shortcut Keys

    Allegro MX User Guide GPS Status Shortcut Keys Shortcut keys listed inTable C-2 are an alternate method for using certain commands in AiDvm. Use the Allegro keypad to run any of the following commands. Table C-2. AiDvm Shortcut Keys with Touchscreen Disabled...

  • Page 96: Gps Config

    Allegro MX User Guide GPS Config Use the GpsConfig utility to change the default datum for a Trimble GPS receiver. If you use a u-blox compatible GPS receiver instead, see GPS Config Ublox on page 91. GPS Config allows you to change the default datum selection (WGS-84) and default acquisition method (Compromise) used by the internal GPS modem to acquire a GPS satellite fix.

  • Page 97: Gps Config Ublox

    Allegro MX User Guide GPS Config Ublox Use the GpsConfigUblox utility to change the default datum for a u-blox compatible GPS receiver. WGS84 is considered the worldwide standard and is typically the default setting for most GPS receivers. If you are uncertain which datum to select, contact Technical Services for assistance.
  • Page 98 Allegro MX User Guide • GSA – the DOP reading (dilution of precision). DOP values identify the accuracy of GPS readings. When a DOP value is zero (0), the GPS receiver does not report the value. When the value is between 1 and 3, GPS accuracy is good;...

  • Page 99: Key Redirect

    Allegro MX User Guide If you use a Trimble GPS receiver with the Allegro, complete the following steps: Tap Start > Programs > GPSPodSetup to open the GPS Receiver Port Settings window. Tap the AI button to apply the correct settings for AI applications. Settings are as follows and should match those in Figure C-5: Figure C-5.

  • Page 100: Bluetooth Com Setup Utility

    • Set Up GPS Controller and GPS Status for Bluetooth (page 97) Bluetooth COM setup utility is typically used when setting up dual GPS. Use it in place of the Allegro MX Bluetooth manager for any of the following conditions: •...

  • Page 101: Install Bluetooth Com Setup Utility

    Allegro MX User Guide • GPS receiver is unable to communicate with GPS Status or GPS Controller software using a Bluetooth connection. For more information about the Bluetooth COM setup utility, visit the following website: http://www.junipersys.com/Juniper-Systems/support/Downloads/Allegro-Field-PC/Allegro-MX/Bluetooth- COM-Setup-Utility Install Bluetooth COM Setup Utility Complete the following steps: Establish a connection with the Allegro and your computer.
  • Page 102 Allegro MX User Guide At the Allegro, tap Start > File Explorer > Storage (or SD Card, if available) > Bluetooth-COM to begin the installation. Figure C-8. Install Bluetooth COM Setup Utility When the message Choose a location to install displays, tap \Storage (or SD Card) > Install.

  • Page 103: Set Up Gps Controller And Gps Status For Bluetooth

    Allegro MX User Guide Tap OK again when a message displays stating the installation was successful. Tap the Close icon (X) to return to the Today screen. Complete the installation by restarting the Allegro. Press the power button for two seconds and then select Reset when the Power Button window displays.
  • Page 104 Allegro MX User Guide Scroll down to NMEA Output , click the wrench icon. On the GPS Controller window (Figure C-13), select the following settings: Figure C-13. NMEA Output Settings Tap the drop-down arrow in the Output Interval field and select 5s Tap the drop-down arrow in the Receiver Port/Primary field and select Bluetooth 2.
  • Page 105 Allegro MX User Guide Figure C-15. GPS Status Options Tap the down-arrow in the Port field and select COM7. When you finish, exit GPS Status . GPS Status and GPS Controller are now setup for Bluetooth communication with the GPS receiver.

  • Page 106: Set Up A Holux Gps Receiver

    GPS Receivers This appendix explains how to set up a Holux and Trimble GPS receiver for use with the Allegro and includes the following topics: • Set Up a Holux GPS Receiver • <Title Ref>Install GPS Controller Software (page 101) •...

  • Page 107: Install Gps Controller Software

    Allegro MX User Guide Tap the drop-down arrow in the Baud field and select 4800 to enable the option and place a check mark inside the option box. Read PPS from Internal GPS Tap the drop-down arrow in the Display Format field and select either...
  • Page 108 Allegro MX User Guide • GPS Pathfinder ProXT Receiver If the GPS receiver uses Bluetooth for communication, also refer to Bluetooth COM Setup Utility on page 94 for additional information. Complete the following steps: Connect the GPS receiver in of the Allegro using the serial cable provided with the receiver.
  • Page 109 Allegro MX User Guide Tap the drop-down arrow in the GPS Receiver Port field and select (Figure D-4). Scroll COM 1 down the window and set up the following fields as follows. When you finish, tap to return Done to the Setup window (Figure D-3).
  • Page 110 Allegro MX User Guide and then scroll to the bottom of the window. Tap the wrench icon in the NEMA GPS Settings Output field to display the Setup NMEA Output Settings window. Figure D-6. Setup NMEA Output Settings Set up fields in the Setup NMEA Output Settings window using information in Table D-1. When again to return to the Setup Options window (Figure D-5).
  • Page 111 Allegro MX User Guide to display the Setup Real-time Settings window. Real-time Settings Figure D-7. Real-time Settings Set up fields in the Setup Real-time Settings window using information in Table D-2. When you finish, tap to return to the Setup Options window (Figure D-5).
  • Page 112 Allegro MX User Guide > > > . Tap when the following message displays: Skyplot Setup Options Disconnect from GPS Are you sure you want to disconnect from the GPS receiver? Tap the Close icon ( ) to exit the GPS Controller software.

  • Page 113: Export Control Classification Number

    The AI software and the third party software are licensed (not sold) to you. This agreement is a legal agreement between you (either an individual or an entity) and American Innovations, a Texas limited partnership (“AI”), regarding your use of the AI Software. If you are not willing to be bound by the terms of...
  • Page 114 Allegro MX User Guide “AS IS” WITHOUT WARRANTY OF ANY KIND, AND NO OTHER WARRANTIES, EITHER EXPRESSED OR IMPLIED, ARE MADE WITH RESPECT TO THE AI SOFTWARE, INCLUDING (BUT NOT LIMITED TO) ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE OR NON-INFRINGEMENT, OR ANY OTHER WARRANTIES THAT MAY ARISE FROM USAGE OF TRADE OR COURSE OF DEALING.
  • Page 115 Technical Data and Computer Software clause at DFARS 252.227-7013 or subparagraphs (c)(1) and (2) of the Commercial Computer Software - Restricted Rights clause at 48 C.F.R. 52.227-19, as applicable. The contractor/manufacturer is American Innovations, 12211 Technology Blvd., Austin, TX 78727.

  • Page 116: Index

    Index Compromise 90 AC charger 1 Connector panel 10, 11 Accuracy 90 ActiveSync 1, 7 DAQ card Add new site 61 data acquisition 20 Add remark 39 DAQ card version 78 Add test point information 40 Data cane Age of fix 87 stick adapter 12 AI software Data logger...
  • Page 117 Allegro MX User Guide Double-click detection 34 GPS config accuracy 90 compromise 90 Amp 22 signal acquisition 90 autorange 22 DAQ card 78 GPS controller software 101 data logging 24, 26 GPS coordinates 87 Diode 22 GPS datum 90 European sample rate 22...
  • Page 118 Allegro MX User Guide Survey file options 37 Monochrome display 2 setting 4 Survey mode CI survey 34 Survey type Off delay 36 on/off high/low 35 Offset 88 Switch On delay 36 chainer/stick adapter 12 Orange shift key 10 TDOP value 87 Technical services CeFileXer.exe 9...
  • Page 119 Allegro MX User Guide Set DAQ registry 85 Waveform graph 25 Windows Mobile Device Center 1, 6 V button Wire counter dcvg reading 50 chainer 12 voltage 50 VDOP value 87 Index...
  • Page 120 American Innovations Allegro MX Keyboard Shortcuts Global Shortcuts AiDVM CeCi Caps Toggle <Blue><Caps Lock> Toggles caps lock on and off. Open View Menu <Alt> <V> Press <Alt> <V> to open View Enable or Disable <A> Press <A> to enable or disable window.
  • Page 121 American Innovations Allegro MX Keyboard Shortcuts Annual / Periodic Survey DCVG GPS Status Open <Ctrl> <O> Open File Open window. <Ctrl><N> Create new survey file. Navigating GPS <Tab> Press <Tab> or <Up/Down Status Window Arrows> to move cursor Save <Ctrl><S>...

Table of Contents