Table of Contents
Advertisement
2. SAFETY
First-Aid Kit
• Have a properly-stocked first-aid kit available for use should the need arise, and
know how to use it.
2.9. Safety Decals
• Keep safety decals clean and legible at all times.
• Replace safety decals that are missing or have become illegible. See decal location figures that follow.
• Replaced parts must display the same decal(s) as the original part.
• Replacement safety decals are available free of charge from your distributor, dealer, or factory as applicable.
2.9.1 Decal Installation/Replacement
1. Decal area must be clean and dry, with a temperature above 50°F (10°C).
2. Decide on the exact position before you remove the backing paper.
3. Align the decal over the specified area and carefully press the small portion with the exposed sticky backing
in place.
4. Slowly peel back the remaining paper and carefully smooth the remaining portion of the decal in place.
5. Small air pockets can be pierced with a pin and smoothed out using the sign backing paper.
2.9.2 Safety Decal Locations and Details
Replicas of the safety decals that are attached to the centrifugal fan and their messages are shown in the figure
(s) that follow. Safe operation and use of the centrifugal fan requires that you familiarize yourself with the
various safety decals and the areas or particular functions that the decals apply to, as well as the safety
precautions that must be taken to avoid serious injury, death, or damage.
12
AERATION FAN – SUPER-FLOW FULL CENTRIFUGAL FAN
CNA-3733 R2
Advertisement
Table of Contents
