Product Overview Micronet SP382A Media Converter Chassis is designed to accommodate 12 units of various types of media converters at a central location for multiple segments cross connection. The slide-in media converters are available for use at 19” Media converter Chassis. The Chassis provides the best solution for users to manage media converters.
Page 3
Installation As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you select should meet the following requirements: The ambient temperature should be between 0 to 50 degrees Celsius. The relative humidity should be less than 90 percent, non condensing.
Power Supply The chassis ships with two power supplies. When the chassis is equipped with two power supplies, you can have the following advanced performance. Hot Swappable The design of the power system is based on an idea of providing maximum flexibility and redundancy.
Page 5
Physical Description Media converter chassis Front/Rear view Media converter chassis hot swappable parts LED Indication Please refer to the following table for LED indication of SP382A Status Indication Power A Green Power Module A +5VDC is on Power B Green...
SPECIFICATIONS MODEL SP382A Capacity 12 slots for side-in converter Power A, Power B, Fan Power Supply Two power supplies provided, hot swappable SP342C/343C/SP373F/SP373G series Converter Model SP362C/SP363C series Per slot DC Power Output +5VDC/1A Per slot DC Power Plug 2.5mm DC receptacle...
Page 7
CE Mark Warning This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
Need help?
Do you have a question about the SP382A and is the answer not in the manual?
Questions and answers