Advertisement

Quick Links

ZG-7600H-P User Manual
ZG-7600H-P User Manual
Page I

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZG-7600H-P and is the answer not in the manual?

Questions and answers

Summary of Contents for Nanjing Z-com Wireless ZG-7600H-P

  • Page 1 ZG-7600H-P User Manual ZG-7600H-P User Manual Page I...
  • Page 2 ZG-7600H-P User Manual Copyright There is no any clear or implicit assurance in the user's manual of our company, including the assurance of selling or installing for the special purpose. There are rival's volumes to carry on the power to alter or revise in our company, if alter and forgive me for not issuing a separate notice.
  • Page 3 ZG-7600H-P User Manual RF exposure warning · This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
  • Page 4: Table Of Contents

    ZG-7600H-P User Manual Content Chapter 1 Introduction ....................1 Introduction to Product....................1 LED and Port Definition .....................1 Chapter 2 Hardware Installation ................3 System Requirements ....................3 Chapter 3 Safely Use Your Device................4 Safely Use in Installation ....................4 Safely Use in Management..................4 Chapter 4 Basic Configuration...................
  • Page 5 ZG-7600H-P User Manual Management Control....................25 Reboot AP .........................25 Remote Management....................26 View Log ........................26 Chapter 7 Typical Applications ................27 Wireless Coverage.....................27 Wireless Bridge ......................27 Chapter 8 Troubleshooting ..................29 Appendix A. Specifications ..................31 Appendix B. ASCII Character Chart ..............36 Appendix C.
  • Page 6 ZG-7600H-P User Manual Content of Figure Figure 1 Product Panel ......................1 Figure 2 login ..........................6 Figure 3 Status Page ........................6 Figure 4 System Setup.......................7 Figure 5 Wireless Settings......................8 Figure 6 VAP Settings ......................11 Figure 7 Security Set .......................12 Figure 8 Bridge Mode Setup ....................15 Figure 9 Security Set in Bridge Mode..................16...
  • Page 7 ZG-7600H-P User Manual Content of Table Diagram 1 LED and Port Definition ..................1 Diagram 2 Default Settings .......................5 Diagram 3 Super-G Reference Throughput................19 Diagram 4 Turbo-G Reference Throughput ................20 Diagram 5 Device Specification....................31 Diagram 6 ASCII........................36 Diagram 7 Country/Region frequency list ................37 Diagram 8 Channel/Frequency List ..................38...
  • Page 8: Chapter 1 Introduction

    Chapter 1 Introduction Introduction to Product ZG-7600H-P, a 4-in-1 SMB High Power WLAN Access Point, support PoE, 200mW Output Power, can be operated in one of the following 4 modes, except general access point, also include AP client, repeater and point to point bridge.
  • Page 9 ZG-7600H-P User Manual WLAN Blinking : Data TX/RX through wireless access point Port Description POWER Reserved (DC 12v/0.83A ) Reboot- Press & release right away Reset Restore- Press for 5 secs and then release Ethernet Chapter 1 Introduction Page 2...
  • Page 10: Chapter 2 Hardware Installation

    ZG-7600H-P User Manual Chapter 2 Hardware Installation System Requirements A computer has a 10/100Base-TX Ethernet that is connected to the same IP segment as the The computer has one Web browser, such as Microsoft Internet Explorer 6.0. Chapter 2 Hardware Installation...
  • Page 11: Chapter 3 Safely Use Your Device

    ZG-7600H-P User Manual Chapter 3 Safely Use Your Device Safely Use in Installation Please do not put Access Point near these places: electric power line, electric light, electricity or any places nearby strong electric power, otherwise it may make damage to Access Point.
  • Page 12: Chapter 4 Basic Configuration

    ZG-7600H-P User Manual Chapter 4 Basic Configuration Default Settings Diagram 2 Default Settings Options Default Value User Name admin password password Device Name APxxxxxx(xxxxxx indicate the last 6 MAC address of AP) Country/Region China IP Address IP Type: Fixed IP Address :192.168.0.228 Mask :255.255.255.0...
  • Page 13: Using The Web Management

    ZG-7600H-P User Manual Using the Web Management The Web Management provides you with a user-friendly graphical user interface. The Access Point allows you via web browser (MS Internet Explorer 6.0) to monitor and configure the device. Run Web Explorer, Enter default IP Address: http://192.168.0.228...
  • Page 14: System Setup

    ZG-7600H-P User Manual System Setup Figure 4 System Setup Device Name This is the NetBIOS name of Access Point; you may modify the default name with a unique name up to 15 characters long including numbers from 0 to 9, letters (A-Z; a-z) and digraphs (-), the name supports WINS so you can ping Access Point using ping Access Point Name or use web browser to open web utility by inputting Access Point Name in the IE address.
  • Page 15: Wireless Settings

    ZG-7600H-P User Manual Wireless Settings Figure 5 Wireless Settings Operating Mode AP: This mode is used to build cover with wireless network which allowing wireless device connection. Bridge: This mode is used to build point to point and point to multi point network which allowing other wireless bridge connection by wireless.
  • Page 16 ZG-7600H-P User Manual 802.11g Only: Setup 802.11g network and only 802.11g STA could connect up it. 802.11b Only: Setup 802.11b network and only 802.11g/b STA could connect up it. Auto(11g and 11b):Setup 802.11g/b network and only 802.11g/b STA could connect up Beacon Interval Specifies the interval time (20 ~1000ms) for each beacon transmission.
  • Page 17 ZG-7600H-P User Manual Turbo-G mode provides higher speed transmissions than Super-G mode. RTS/CTS Threshold Request to Send Threshold. Its value is from 0 to 2346 bytes, RTS is designed to solve Network collision. It will make signals lose if two stations send data to AP at the same time.
  • Page 18: Chapter 5 Advanced Configuration

    ZG-7600H-P User Manual Chapter 5 Advanced Configuration VAP(Virtual AP) Setup One device could be used to eight devices. So you could easy setup your network and manage different users. And the eight VAP could set different security to protect your network.
  • Page 19: Figure 7 Security Set

    ZG-7600H-P User Manual Figure 7 Security Set Security Profile Name You could use a friendly name to manage different VAP. SSID The SSID is a unique ID used by Access Points and Stations to identify a wireless LAN. Wireless clients associating to any Access Point must have the same SSID. The default ESSID is “Wireless”.
  • Page 20 ZG-7600H-P User Manual Choose the following type. Open System: wireless device does not any authentication and can be connected with Access point. But the message between wireless device and Access point also use encryption through the following type “authentication type”.
  • Page 21: Bridge Mode Setup

    ZG-7600H-P User Manual You must configure RADIUS Server Settings with either Legacy 802.1x, WPA or WPA2 option. Authentication Server This configuration is required for authentication using RADIUS. IP Address, Port No. and Shared Secret is required for communication with RADIUS Server.
  • Page 22: Figure 8 Bridge Mode Setup

    ZG-7600H-P User Manual Figure 8 Bridge Mode Setup In Security Profile page, you could select WDS_Profile to edit. And set the encryption between the devices. Chapter 5 Advanced Configuration Page 15...
  • Page 23: Ap Client Mode Setup

    ZG-7600H-P User Manual Figure 9 Security Set in Bridge Mode AP Client Mode Setup In Wireless Settings page, you could set operation mode to AP Client mode. And you should input the SSID to connect with AP. Chapter 5 Advanced Configuration...
  • Page 24: 802.1Q Vlan Setup

    ZG-7600H-P User Manual Figure 10 AP Client Mode Setup In Security Profile page, you could select STA_Profile to edit. And set the encryption between the devices. Figure 11 Security Set in AP Client Mode 802.1Q VLAN Setup In AP mode, you could enable 802.1Q VLAN to manage users.
  • Page 25: Mac Filter

    ZG-7600H-P User Manual Figure 12 802.1Q VLAN Management VLAN ID Management VLAN ID is used to manage device and monitor the network. Profile VLAN ID Profile VLAN ID is used to manage VLAN. You could set ID 1~4049. MAC Filter The optional MAC Filter window lets you block the network access privilege of the specified stations through the Access Point.
  • Page 26: Throughput Accelerate

    ZG-7600H-P User Manual Figure 13 MAC Filter You could enable MAC Filter and input the allowed or denied STA’s MAC. Throughput Accelerate There are two ways to accelerate throughput in our Access Points: Super-G and Turbo-G. Super-G Application If open Super-G Function, it can obviously improve the throughput of wireless network. The following table gives you a reference.
  • Page 27: Diagram 4 Turbo-G Reference Throughput

    ZG-7600H-P User Manual Turbo-G The following table gives you a reference. Diagram 4 Turbo-G Reference Throughput Mode Turbo-G OFF Turbo-G ON AP mode 20Mbps 30Mbps AP and client support Turbo-G. Chapter 5 Advanced Configuration Page 20...
  • Page 28: Chapter 6 Management

    ZG-7600H-P User Manual Chapter 6 Management View Device’s Status Figure 14 Status The Status page displays current settings and statistics of your Access Point that is Read-only, and any change of settings must be made on other pages. View Association List...
  • Page 29: View Statistics

    ZG-7600H-P User Manual View Statistics Figure 16 Statistics Info In Status page, click View Statistics to see performance statistics such as number of packets sent and number of packets received. Change Password Figure 17 Change Password In Password Setup page, you could change the password for accessing the Settings pages.
  • Page 30: Firmware Upload

    ZG-7600H-P User Manual Firmware Upload In F/W Upload page, you could upgrade Access Point software. Figure 18 Firmware Upload Open Upgrade Firmware page Click browser button and select the firmware file in local hard disk. Click Upload button. After upgrade, login again and check the software version.
  • Page 31: Restore To Factory

    ZG-7600H-P User Manual Figure 19 Configuration File Click button to save backup file to hard disk. Click Browser button to locate the backup file you want to retrieve and click retrieve button, then the AP will restart. Do not try to turn off the Access Point, shutdown the computer or do anything else to...
  • Page 32: Management Control

    ZG-7600H-P User Manual Management Control Management Control function lets you allow or deny the specified IP address to manage the device. Figure 20 Management Control Reboot AP Figure 21 Reboot AP You may select Yes on Reboot page and then click on Apply button to reboot the access point.
  • Page 33: Remote Management

    ZG-7600H-P User Manual Remote Management Figure 22 Remote Management SNMP Settings. IP Address to Receive Traps: You can find the unusual log on the Trap Server. Public Community Name: Set the Read Community; Private Community Name: Set the write Community;...
  • Page 34: Chapter 7 Typical Applications

    ZG-7600H-P User Manual Chapter 7 Typical Applications Wireless Coverage In the AP mode, it can be set as wireless coverage spot. Figure 24 Wireless Coverage Application STA-A/B/C connect AP by SSID, and then they can access PC in Ethernet and internet.
  • Page 35: Figure 25 Point To Multi-Point Application

    ZG-7600H-P User Manual Figure 25 Point to Multi-Point Application Access Points builds connection by WDS (Wireless Distribution System) mode. The main setting is remote MAC address. The following steps are the way. After power on two Access Points, use two computers to connect each of them by network cable.
  • Page 36: Chapter 8 Troubleshooting

    ZG-7600H-P User Manual Chapter 8 Troubleshooting How to know the MAC address of the Access Point? • The MAC address is written in a label which is in the bottom of Access Point. • From the General page of WEB configuration, you also can get the MAC address of AP.
  • Page 37 ZG-7600H-P User Manual • Check the “Operating Mode” whether is “Bridge Mode”. • Check the “remote MAC address” whether is right. • Check the “Country/Region” whether is same. • Check the “Channel/Frequency” whether is same. • Check the “Data Encryption” and “Key” whether is same.
  • Page 38: Appendix A. Specifications

    ZG-7600H-P User Manual Appendix A. Specifications Diagram 5 Device Specification ZG-7600H-P IEEE 802.11g 54Mbps Wireless Access Point Appendix A. Specifications Page 31...
  • Page 39 MPEG video. It is ideal WLAN application in home or small office environment. With latest WPA2 and 802.11i standard, ZG-7600H-P has much higher level of security to connect to your network With ZG-7600H-P,users can have productive and...
  • Page 40 ZG-7600H-P User Manual Standard IEEE 802.11g IEEE 802.11b IEEE 802.3 and IEEE 802.3u IEEE 802.3af Yes, IEEE802.3af Ethernet Data Rate Auto / 10M / 100M Rate Select SuperG/11g: 108 /54 /48 /36 /24 /18 /12 /9 /6 Mbps Auto 11b: 11 /5.5 /2 /1 Mbps Auto...
  • Page 41 ZG-7600H-P User Manual WDS Mode AP + Repeater Yes, Support Multiple Client AP Client Mode DHCP DHCP Client Super G Turbo G QoS (WMM) Multi-BSSID VLAN Output power configurable Yes (4 levels) System log STA list Radio ON/OFF Load Balance of Multi AP...
  • Page 42 ZG-7600H-P User Manual Power / LAN / WLAN Power Supply Physical Dimension 142mm(L)*134mm(W)*46mm(H) Weight Approx: 0.9Kg Environment Operating Temperature 0~55℃ -30~60℃ Storage Temperature Humidity 20~95﹪ Appendix A. Specifications Page 35...
  • Page 43: Appendix B. Ascii Character Chart

    ZG-7600H-P User Manual Appendix B. ASCII Character Chart You can dispose hexadecimal number system counting or ACSII one yard of keys encrypted as WEP. Hexadecimal number system is made up by 0-9 and A-F (letter does not distinguish capital and small letter); ACSII yard is by 0-9 figures, A-F, a-f (letter distinguishes capital and small letter), and the punctuation mark makes up.
  • Page 44: Appendix C. Country/Region And Channel

    ZG-7600H-P User Manual Appendix C. Country/Region and Channel Diagram 7 Country/Region frequency list Country/Region 5.8G Frequency(MHz) 2.4G Frequency(MHz) Australia 36-64,149-165 1-13 Austria 36-48 1-13 Canada 36-64,149-165 1-11 China 149-165 1-13 Denmark 36-64,100-140 1-13 Finland 36-64,100-140 1-13 France 36-64 1-13 Germany...
  • Page 45: Diagram 8 Channel/Frequency List

    ZG-7600H-P User Manual Diagram 8 Channel/Frequency List 5.8G Channel Frequency(MHz) 2.4G Channel Frequency(MHz) 5170 2412 5180 2417 5190 2422 5200 2427 5210 2432 5220 2437 5230 2442 5240 2447 5260 2452 5280 2457 5300 2462 5320 2467 5500 2472 5520...

Table of Contents